Induction Heater Yllvape IH Power and temperature controlled induction for use with Dynavap

[This Is My Vapestick]

great, I went ahead and pulled the trigger on the 3.0, I also have the 2.0
I am still waiting on my Simrell Engine to arrive, USPS has been pretty bad being on time, in fact they have been very, very bad, lately
its been over 2 weeks, never used to take this long

For the 2.0, I completely removed the ceramic insert plug to get it to fit in deep enough, although I would prefer it went in just 1-2mm more. So far I've got pretty good results with 45W for 45seconds. I have a Wand, but use the yll 2.0 for the Simrell if I'm also using the Tempest at the same time so I don't have to change around adapters/inserts on the fly. Otherwise I use just the Wand with the Simrell. You'll love his engine - it's incredible. It feels so calculated with incredibly precise engineering, like an Italian sports car. The experience is well worth the wait.

 

[HumbleLivings]

For the 2.0, I completely removed the ceramic insert plug to get it to fit in deep enough, although I would prefer it went in just 1-2mm more. So far I've got pretty good results with 45W for 45seconds. I have a Wand, but use the yll 2.0 for the Simrell if I'm also using the Tempest at the same time so I don't have to change around adapters/inserts on the fly. Otherwise I use just the Wand with the Simrell. You'll love his engine - it's incredible. It feels so calculated with incredibly precise engineering, like an Italian sports car. The experience is well worth the wait.

hey great feedback, I have noted all this to test it out once my Sim Engine comes in,
thanks for taking the time so share your feedback

 

[This Is My Vapestick]

hey great feedback, I have noted all this to test it out once my Sim Engine comes in,
thanks for taking the time so share your feedback

Forgot mention, the 45W/45s is a good starting point. I typically always use higher wattage or time than that and I almost always go ~5 seconds past the click for a decent medium roast.

 

[HumbleLivings]

Forgot mention, the 45W/45s is a good starting point. I typically always use higher wattage or time than that and I almost always go ~5 seconds past the click for a decent medium roast.

I just got the Sim Engine,
tried Yll IH 2.0 took off ceramic, tried on Boost Mode 60 seconds (but pulled it off at 14 seconds left) did not go the entire 60
had a good session with that setting, then i cooled Sim down with Sim Stand which works great to cool it down

loaded again and went same way except this time I waited till it got down to 10 secs instead of 14
seemed a bit more hot, I think I may have combusted except i was doing small littel draw hits,
if i had gone long I might have combusted

what are your settings with YLL IH 2.0
with higher wattage than 45 watts?


do you use Sim Engine with Wand?
if so what settings do you use

 

[HumbleLivings]

so far the best setting for Yll IH 2.0 wSimrell Engine on wpa
has been:
60 Watt
50 Sec

i tried 60w at 45 seconds
its a noticalbe difference with just 5 seconds more on 60watts
which is best setting for my liking so far ( 60W/50sec )

 

[Doug.dimmaglow]

Nice, finally an IH that utilizes 21700’s. Went ahead and placed the order, fingers crossed it works with my Tempest. Wonder if some flat top 60A batteries will push out that 100W max

 

[Tji89]

Can anyone share the coupon? I don't have Instagram

 

[HumbleLivings]

Can anyone share the coupon? I don't have Instagram

i believe it is:
yllih30

Cheers!

 

[Tji89]

It worked, Thank you!

 

[tv_n_chillin']

How does the 3.0 compare to the BFG Flare? I understand that very soon the new model is going to be available. They look the same and It notes on the webpage that the flare is made by YLL. Do I have that correct? Is the flare just the YLL 3.0 rebranded?

 

[This Is My Vapestick]

what are your settings with YLL IH 2.0
with higher wattage than 45 watts?


do you use Sim Engine with Wand?
if so what settings do you use

For the yll 2.0 and the Sim engine, I most commonly use 60W and 50s, but that's with Molicel P30B batteries. If you're using the stock Wand batteries in the 2.0, they are underpowered for 60W settings. If I recall, 45W is the highest you can go with the stock Wand batteries in the 2.0, likely because they are only 20A where the P30Bs are 30A. I haven't used boost mode, so I can't comment there, but I can tell you that the Sim engine best likes to be heated a bit more slowly than what the boost mode is probably offering.

The Sim with the Wand is fantastic. Insert the engine with the top fin aligned with the top rim of the Wand (this will be 1 or 2mm deeper than what the 2.0 can do). From there, anywhere from 350-450F is fantastic (ignore the clicks, just let it roll until timeout). The closer to 450, the bigger the clouds will be, but don't sleep on that 350, that's where the terps really come alive - tons of flavor. I usually stick to 425 until timeout unless I want big flavor - that's the sweet spot for me. From what I hear, the DV insert that comes with the Wand will work, but you may need to increase the temp to accommodate for the DV insert because it will absorb some heat.

I'm hoping that getting the 3.0 isn't a waste of money, even though I used the coupon. It would be nice to replace my 2.0 with something that can handle some heavier lifting when my Wand is dialed in for other devices (Tempest 2 wand adapter is always attached). I wish there was some public information on estimated timing of release. It's kind of annoying that there isn't and it's making me feel like this may be an unwise purchase until that information is available.

 

[HumbleLivings]

For the yll 2.0 and the Sim engine, I most commonly use 60W and 50s, but that's with Molicel P30B batteries. If you're using the stock Wand batteries in the 2.0, they are underpowered for 60W settings. If I recall, 45W is the highest you can go with the stock Wand batteries in the 2.0, likely because they are only 20A where the P30Bs are 30A. I haven't used boost mode, so I can't comment there, but I can tell you that the Sim engine best likes to be heated a bit more slowly than what the boost mode is probably offering.

The Sim with the Wand is fantastic. Insert the engine with the top fin aligned with the top rim of the Wand (this will be 1 or 2mm deeper than what the 2.0 can do). From there, anywhere from 350-450F is fantastic (ignore the clicks, just let it roll until timeout). The closer to 450, the bigger the clouds will be, but don't sleep on that 350, that's where the terps really come alive - tons of flavor. I usually stick to 425 until timeout unless I want big flavor - that's the sweet spot for me. From what I hear, the DV insert that comes with the Wand will work, but you may need to increase the temp to accommodate for the DV insert because it will absorb some heat.

I'm hoping that getting the 3.0 isn't a waste of money, even though I used the coupon. It would be nice to replace my 2.0 with something that can handle some heavier lifting when my Wand is dialed in for other devices (Tempest 2 wand adapter is always attached). I wish there was some public information on estimated timing of release. It's kind of annoying that there isn't and it's making me feel like this may be an unwise purchase until that information is available.

hey thanks for all the great feedback,
I think my yll 2.0 batteries are P28B's, I do have the brown default batteries but dont use them anymore because they are lower amps,I have 4x P28B's and use 2 on wand and 2 on yll 2.0

I will try out your settings next time I use it, I have been using the Inductor v2 lately with pretty good results


Yll told me a week ago that the 3.0 would be ready to ship in 2 weeks, but we'll see, I am hoping that the 3.0 is better than the 2.0 also.

thanks for taking the time to answer my questions, really appreciate you Sir!

 

[tv_n_chillin']

The BFG Flare (newest version) which is designed by BFG and manufactured by YLL is being shipped to US authorized dealerships on July 31st. I would assume the YLL product will happen around the same time if not slightly earlier. This new upgrade looks to work with all major products. Not sure about the Sim but assuming if it works with the diameter of dynas it will work with Simrell. I’ll be testing as soon as I receive the Flare.

 

[jbm]

The BFG Flare (newest version) which is designed by BFG and manufactured by YLL is being shipped to US authorized dealerships on July 31st. I would assume the YLL product will happen around the same time if not slightly earlier. This new upgrade looks to work with all major products. Not sure about the Sim but assuming if it works with the diameter of dynas it will work with Simrell. I’ll be testing as soon as I receive the Flare.

Personally I’m done with YLL IH tech. I have the v1 YLL IH and the first Flare. Neither of them work with anything I want them to. This is especially so with the Flare. I’m tired of beta releases pretending to be production units.

 

[This Is My Vapestick]

hey thanks for all the great feedback,
I think my yll 2.0 batteries are P28B's, I do have the brown default batteries but dont use them anymore because they are lower amps,I have 4x P28B's and use 2 on wand and 2 on yll 2.0

I will try out your settings next time I use it, I have been using the Inductor v2 lately with pretty good results


Yll told me a week ago that the 3.0 would be ready to ship in 2 weeks, but we'll see, I am hoping that the 3.0 is better than the 2.0 also.

thanks for taking the time to answer my questions, really appreciate you Sir!

You're welcome! When I use 60W and 50s with my P30Bs, I get the second click right around the timer expiring. Sometimes I reset the counter and then drop it back in for a few seconds if I don't hear the click - the few extra seconds add some noticeable clouds.
**I just noticed in the thread above that you use the same settings. You've got good taste and I notice the same thing - a few extra or a few less seconds with these settings will have a noticeable impact on the experience. Great minds...*

The 2.0 is 60W max and the 3.0 is 100W max, so it'll be able to work harder and heat up those big hitters. I just measured the ID of the 2.0, which is 12.6mm and the measured ID of the Wand is 14.3mm (not official numbers, just my quick measurements with an inexpensive digital caliper). Brenyo said the ID of the 3.0 is 16mm, so this is definitely geared towards a wider range of devices.

I'd love it if yll can keep that two week goal. It would be great to have two IH options at my disposal which can each handle a big hitters. Not like I don't have about ten torches, but still... VAS and all.

Don't forget that the 3.0 is using 21700 cells, not 18650, so you'll need them if you don't already have them. I don't have a recommendation on which discharge current to get, so for now I'm sticking with four unused 30A 21700s I already have.

@Brenyo, which cells are you using in the 3.0?

Personally I’m done with YLL IH tech. I have the v1 YLL IH and the first Flare. Neither of them work with anything I want them to. This is especially so with the Flare. I’m tired of beta releases pretending to be production units.

I get it. YLL hasn't had the best reputation lately. I'm hoping they took what they learned from the Flare and apply it the 3.0. And with all the Angus drama, I'm also hoping they know to make sure everything is buttoned up before they ship. The hopium is real.

 

[HumbleLivings]

You're welcome! When I use 60W and 50s with my P30Bs, I get the second click right around the timer expiring. Sometimes I reset the counter and then drop it back in for a few seconds if I don't hear the click - the few extra seconds add some noticeable clouds.
**I just noticed in the thread above that you use the same settings. You've got good taste and I notice the same thing - a few extra or a few less seconds with these settings will have a noticeable impact on the experience. Great minds...*

The 2.0 is 60W max and the 3.0 is 100W max, so it'll be able to work harder and heat up those big hitters. I just measured the ID of the 2.0, which is 12.6mm and the measured ID of the Wand is 14.3mm (not official numbers, just my quick measurements with an inexpensive digital caliper). Brenyo said the ID of the 3.0 is 16mm, so this is definitely geared towards a wider range of devices.

I'd love it if yll can keep that two week goal. It would be great to have two IH options at my disposal which can each handle a big hitters. Not like I don't have about ten torches, but still... VAS and all.

Don't forget that the 3.0 is using 21700 cells, not 18650, so you'll need them if you don't already have them. I don't have a recommendation on which discharge current to get, so for now I'm sticking with four unused 30A 21700s I already have.

@Brenyo, which cells are you using in the 3.0?


I get it. YLL hasn't had the best reputation lately. I'm hoping they took what they learned from the Flare and apply it the 3.0. And with all the Angus drama, I'm also hoping they know to make sure everything is buttoned up before they ship. The hopium is real.

I just received the Dynavap Wand Silicone Adapter, and I just tried your suggested 350F on Wand and Sim engine
I am so glad I did, really good terps the best I have had yet, I will be using this heat setting from here on out, it give good
amount of clouds but also good flavor/terps. to be honest I always tend to go for the higher temps, but when you said "don't sleep on that 350, that's where the terps really come alive"

that caught my attention and I am glad I tried it, thanks!

I am having good resuls with the inductor v2 from Camouflet, the v2 seems to work alot better than the v1 and wont scratch your devices as it now has a nice silicone type coating on the f-core heating stone.

anyhow thanks for sharing man,
lets hope for the best on the yll 3.0, I still have to order the 21700 batteries for it
which do you recommend?

 

[someTooL]

I picked up the Molicel 45B 45a 21700’s. Couldn’t find any requirement specs and the 45B’s seem to have great feedback. It’s my first venture into 21700’s lol