One of the features was supposed to be an adjustable condenser. The video showed a condenser with indentations on the condenser exterior that were designed to move over notches inside the mouthpiece for the adjustment. I have an Omni and the condenser adjusts depth by threads and rotating the mouthpiece. I see no way to adjust this new one. George was raving about how simple the new adjustment was. The condenser I received does not look like the one George used in the video. Need to double check the date on that video. I have a bunch of DV stuff and this is only 2nd time I've had a question or issue.
-
SCAM WARNING! See how this scam works in Classifieds.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
coolbreeze
Well-Known Member
Yeah, it does adjust. I believe the tube with the lines is the Hyperdyne condenser. The M7XL's is smooth and it adjusts, too, but the indentations are inside the mouthpiece I believe. If you try to shove that notched end into the top of the MP, where is goes into the stem, it should click into place in several different depths. Same exact concept as you saw, just a slightly different implementation.
Last edited:
Let me go back and locate the video I mentioned. I am pretty sure is was M7XL specific.
Think you are right!! I looked at video again and think I got confused between this one and Hyperdyn. Those notches are there for a reason and video shows mouthpiece being rotated. Let me watch that more closely. Really appreciate your input. I come here to get straightened out! HaHa....
Think you are right!! I looked at video again and think I got confused between this one and Hyperdyn. Those notches are there for a reason and video shows mouthpiece being rotated. Let me watch that more closely. Really appreciate your input. I come here to get straightened out! HaHa....
coolbreeze
Well-Known Member
Hope you enjoy the heck out of it!
hotmeals
Serial vapist
Really, really loving this SS M7 tip / Armored Cap / Wand combo lately. Big tasty hits, forgiving on reheats, and awesome for outdoors. Super easy to get a deep, thorough roast without going too far. The looseness of the Armored Cap still bothers me though. I burned myself recently because it fell off after being dislodged by catching it on the side of the Wand while pulling it out right after heating.
WhyWhyWhy?
Well-Known Member
Guys, is it worth waiting for discounts on dynavap.com d Father's Day ? I'm not from the USA myself, and I don't know how significant this holiday is or if there might be sales on this day.
nicknobody
Well-Known Member
Father’s Day is over already. I’d bet 4th of July would have some sort of sale? Wait a few weeks and see. I’d say it’s worth if buying a device or a bundle
coolbreeze
Well-Known Member
They may also have concentrate-related packages & caps for 7/10.
WhyWhyWhy?
Well-Known Member
Oops... I got the wrong date.Thanks for helping me figure it out.
Flotsam
Well-Known Member
ah the Hash holiday
I know Dynavap isn't as big w the concentrate crowd, i mean they do have the Dynacoil but don't see many reviews or mentions on here at all. For what its worth & i put my input in this thread about the Vapor Genie concentrate pad. https://fuckcombustion.com/threads/...nie-concentrate-pad.56345/page-2#post-1850546 I filed down one the spare pads so it would fit in my M7. It worked flawlessly in the M7 I can report. it leaves no mess in your device especially really runny concentrates , easy to load (just remove cap),
The pad can be easily torched off after use. I had been thinking about this more after my first few trial sessions. It was a real PITA to get it to get the larger pads fit so buying them would be key. I hope Vapor Genie would make a smaller 8 mm size for all Dyna, Vaphit etc users. But conceivably you could have a few of these pre-loaded pads and go off with just your Dyna , tiny torch and these pads and doing concentrates sesh anywhere you bring your Dyna. I call that a win especially if they can stay at that $15 for 4 price point.
The pads are very porous and ensure all material stay on the pad and not mess things up w stray concentrate material. and for the most important part it tastes quite good. Not like off a quartz banger level but more than acceptable for the convenience.
Last edited:
kegstandman420
Well-Known Member
Id love to see them drop a nectar collector tip that could be heated with a double or triple torch that would replace the tip/cap on 710
Flotsam
Well-Known Member
are you thinking of something along these lines?
Simrell Collection: Warhead - Convert Vortex Dynavap Stem into a Nectar Collector - 420 VapeZone
New from Simrell Collection this month, just in time for 7/10, is the WARHEAD adapter for dabbing with your Dynavap - nectar collector style.
420vapezone.com
Cmdr. Redeye
Former Cylon sheriff
DV fans: just checked the site, new model out? J. P. Finley? Finned body married to Halo tip. Interesting.
CR
CR
Petetbay
Well-Known Member
The stem is interesting, probably cools good, not a fan of the Halo tip and kind of expensive, if I could get the stem alone I’d try it.
coolbreeze
Well-Known Member
Tempting. I kinda wish it had the waist all the way around but it's weirdly stunning anyhow. Pricey but it is essentially a non-eclipsing but-still-adjustable Vong. Plus I think it's the first real shorty they've made in years.
hotmeals
Serial vapist
For the record, I've got a Dynacoil and think it's great. I heat it with the Forge and can get very nice hits out of very small dabs without having to swab / clean every time. I haven't tried it with the Wand yet, and I've found it a little tricky to hit the right temp with a torch, at least on the first hit.
stonedBBer
Well-Known Member
What's a halo tip. Sorry never owned dynavaps skipped thrm to go straight to mad heaters and vestratto so I dont know the ecosystem
Vape_Or_Die420
Well-Known Member
Sorry, I’m terrible at searching for things on here. Can somebody tell me what temperature you set the spire wand at with an armored cap?
Dustin McKief
Well-Known Member
Cap depth is the key to getting the roast level you’re after. Wand’s temperature reading isn’t based on actual measured temperature, it estimates based on a timer. I set mine high enough to get past both clicks.
Vape_Or_Die420
Well-Known Member
What temp do you use?
Dustin McKief
Well-Known Member
I use 800, but could likely use lower. It only has to be high enough to not time out before both clicks.