Firewood Vaporizer
- Thread starter Bouldorado
- Start date
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Arawfish
Green Thumb
Couldn’t agree more with Grass Yes about the good vibes boro stems. Mine came in last Thursday and it’s all I’ll ever be using now, mines a long one because I don’t like to retract my stem and the cooling is phenomenal. Definitely going through bowls faster aha. Somehow the taste was also refined by the stem? I’m not sure how that works exactly but my olfactory glands sure noticed a taste difference.
Hello,
I made an adjustment on the tab of the FW7 case for those who don't use the OG glass tube for one that sticks out. I can adapt the hole diameter for your PM!
I made an adjustment on the tab of the FW7 case for those who don't use the OG glass tube for one that sticks out. I can adapt the hole diameter for your PM!
GnarlyVandal
Active Member
Hi all, I broke my glass adapter tube.. anyone know the dimensions of that glass rod so I can potentially look for a replacement (or 3)?
bossman
Gentleman Of Leisure
The BB9 has an airport/carb hole. That makes it a bit of a pain, you either have to close the carb with your finger, which makes it a two-handed operation or you have to close it up somehow. I have the original "strong-arm" Dynavap adapter from Sneaky Pete... that has no carb... but it's not available anymore. Not sure who makes anything like it.
Btw does anyone know a good safe way to close up an airport? I've been using a nice glass stem that's longer than the hula stem but I have to plug the carb somehow.
Also btw, these stems are now in stock at Oregon Glass Blower, @Shit Snacks are you the one that said you use this with the WPA?
@Shit Snacks is correct as usual: that's the design of the j-hook I got from OGB and it works a treat with the FW7
GnarlyVandal
Active Member
Okay crisis averted, my Dynavap condenser fit nicely!
so that’s a workaround for the moment at least
DryBonesufo
Well-Known Member
Does anyone know of an alternative cooling mouthpiece for the firewood 4?
Vapenvy
Indie vaper
@DryBonesufo that's a difficult one.
If you mean the 1 inch glass cylinder, both the length and width are pretty unique.
The closest I have come is using an @Ed's TnT nano stem. The wooden one with the metal bowl and it works with the silicon, screen and glass bowl from the FW3/4 and becomes a long stem.
This is for my FW3 but I am pretty sure the FW4 used the same size.
If you mean the 1 inch glass cylinder, both the length and width are pretty unique.
The closest I have come is using an @Ed's TnT nano stem. The wooden one with the metal bowl and it works with the silicon, screen and glass bowl from the FW3/4 and becomes a long stem.
This is for my FW3 but I am pretty sure the FW4 used the same size.
floribud
Well-Known Member
Got this glass elbow from Oregon Glass Blower. Thought yalls might appreciate a few pics.
Its pretty long but still holdable in one hand. The cooling is exceptional.
Its pretty long but still holdable in one hand. The cooling is exceptional.
slick
Well-Known Member
FW8 when 
I recently got a tinymight and I'm itching to get a second one because it's so good but feels fragile. Not so much in it's construction as in it's very being.... kind of like a grasshopper. I figure I should get another vape then the TM because while it's a great vape that I love, it feels less then ideal. And we're all chasing that particular dragon aren't we?
I recently got a tinymight and I'm itching to get a second one because it's so good but feels fragile. Not so much in it's construction as in it's very being.... kind of like a grasshopper. I figure I should get another vape then the TM because while it's a great vape that I love, it feels less then ideal. And we're all chasing that particular dragon aren't we?
Sir Wibble
Well-Known Member
Yes we areFW8 when
I recently got a tinymight and I'm itching to get a second one because it's so good but feels fragile. Not so much in it's construction as in it's very being.... kind of like a grasshopper. I figure I should get another vape then the TM because while it's a great vape that I love, it feels less then ideal. And we're all chasing that particular dragon aren't we?
. A backup of a favourite is always nice and TM is always readily available. FW8 can't be long away now,I hope so maybe just wait a little while longer. I love my TM,its in my daily rotation along with my FW7 and MVS and wand
Great minds think alike.I love my TM,its in my daily rotation along with my FW7 and MVS and wand
My daily rotation is Fw7, TM, and 2018M with TRWW condenser/mouthpiece/intercooler (poor man's MVS) and Pipes PSM.
Well, I'm in Australia and he shipped here no worries. That being said, he's not shipping anything anywhere at the moment as he's working on the next version.
You have to look at the 2nd hand market, that's how I was able to get one. Now that it's not made anymore, the prices are going up.
Normally, the new model should be available for EU customers, I hope!
Yo, people of FC. The guy I'm quoting made me a case for my FW7, and it is damn near perfect. Apparently one of my two complaints was rectified in latter versions, and the second one may be more of a personal preference sorta thing. Postage was painfully slow to Australia, but that is what it is... You should consider one!
cptofnthng
Well-Known Member
I have a fw7 and im in Europe.. i cant sell it though. Its still in the box.
Sir Wibble
Well-Known Member
I'm in the UK . Got mine BNIB from 2nd hand market. Well worth the effort and extra cost.
Thank you!
it's true that it took a long time to get to your house.
For the USA/CA, it takes 10-12 days.
Otherwise, faster is possible but it's more expensive, basically the price of the case (40$).
Michel
Well-Known Member
@cptofnthng @Sir Wibble
Thanks, any advice where I could start searching for a 2nd hand FW apart the classifieds on fc?
Thanks, any advice where I could start searching for a 2nd hand FW apart the classifieds on fc?
Oh, I'm not particularly bothered, I didn't have to chase it up, that's a win in my book!