• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Herbie V2 by Vape Engineering - 510 dry herb vaporizer

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
had to replace the hopper io as my most stealthy portable, that ones kinda tied to the ac adapter for now.
so I thought, why not hide in plain sight by going full metal e-cig mod :nod:

edit: also the buttons on this mod...they just sound and feel so satisfying

Where did you get it? How much is it? What is the mod called? Sorry you may have already posted this earlier in the thread...
 
Shit Snacks,

Spleeeno

Horsin around

fangorn

Well-Known Member
edit: good to know: the negative point of this box mod is that there is no degassing hole for the battery ... (unless it has been modified recently ...) Given the resistance of HerbieV2, it is very damaging !!
A priori, the updated version has been modified. On the Fasttech forum, the latest customer says that there are now 6 ventilation holes in the battery compartment cap. I zoomed on the vape engineering photo and indeed we can see six holes in the upper groove of the cap...
Sorry for the bad info !
 
fangorn,
  • Like
Reactions: Arawfish

games-loaves0t

Well-Known Member
Tek-Division Legacy, 200€ without VAT
and yeah I mentioned it a few weeks ago:
Out of curiosity, why is the Legacy so expensive? Most of the box mods listed in this thread are 50%+ cheaper. Is it just the aesthetics or does it offer better functionality?
 
games-loaves0t,

Spleeeno

Horsin around
Out of curiosity, why is the Legacy so expensive? Most of the box mods listed in this thread are 50%+ cheaper. Is it just the aesthetics or does it offer better functionality?
well its triple digit numbered units from one of the more artisan mod makers in europe, made from one block of anticorodal un-anodized aluminium, special pinout-board so you can still use escribe to change the dna60 profiles without having a usb port on the device to "ruin" the design, super fancy buttons with omron switches.
so there's a bunch of reasons its pricier, but it wont make the vapor any better or improve the herbie.
just wanted to finally try a dna board and this one looked solid, like it would last me a while and I didnt find any other side-by-side mod with such a low 510 port that still offered 60W.

I mean I kinda mentioned it in my post a few weeks ago, its more like machineporn
 

Razhumikin

Well-Known Member
well its triple digit numbered units from one of the more artisan mod makers in europe, made from one block of anticorodal un-anodized aluminium, special pinout-board so you can still use escribe to change the dna60 profiles without having a usb port on the device to "ruin" the design, super fancy buttons with omron switches.
so there's a bunch of reasons its pricier, but it wont make the vapor any better or improve the herbie.
just wanted to finally try a dna board and this one looked solid, like it would last me a while and I didnt find any other side-by-side mod with such a low 510 port that still offered 60W.

I mean I kinda mentioned it in my post a few weeks ago, its more like machineporn
Im planning on mostly using the Herbie on a DNA board when I get mine, what settings are you using for the Herbie? Are you having success?
 

Vape Engineering

Manufacturer
Manufacturer
No UN3480 stickers yet I guess 🙄
We sent all orders.
Everyone should have recieved an email from me. You should have the tracking.
Could you please check your spam folder?
Sometimes our mails from info@ went direct into the spam.



I think you can go for 33-35 Watts.

I did a few tests with the p80 but I havent even testfired it on the legacy so far, but my plan would be to set it to 30W and just do wattage to get a feel for it.
I think you can go for 33-35 Watts.
 

ॐNoodles

Well-Known Member
Got the tracking on the 4th. But no practical information besides electronically created label on the 3rd
We sent all orders.
Everyone should have recieved an email from me. You should have the tracking.
Could you please check your spam folder?
Sometimes our mails from info@ went direct into the spam.



I think you can go for 33-35 Watts.
 
ॐNoodles,

4everpushingaboulder

Well-Known Member
Got the tracking on the 4th. But no practical information besides electronically created label on the 3rd
I’m a few days ahead. No update since.


January, 03 2022​

  • 23:05 Local time | The international shipment has been processed in the export parcel centerRodgau, Germany
 
4everpushingaboulder,

cx714

Unregulated Tendencies
I took a little break from FC, mostly because I was on holiday but also because I realized that, like most enthusiast forums, FC eventually becomes a endless cash bleed. So I stepped away (after pre-ordering a Revolve stem).

Now I'm back and full of regret for missing out on this excellent launch. I'm also subscribed to the thread and furiously awaiting the next drop. Maybe it will come in irony as well as stainless steel.

Happy new year everyone!
 

Momor

Well-Known Member
I should also receive mine tomorrow and will use it with a paranormal DNA 250C so advices for TCR settings on it would be much appreciated.

I think i have TCR settings for RBT splinter and splinter Z on it. Could one of them work maybe ? I really don't know much about box mods 😅
 

Vape Engineering

Manufacturer
Manufacturer
I should also receive mine tomorrow and will use it with a paranormal DNA 250C so advices for TCR settings on it would be much appreciated.

I think i have TCR settings for RBT splinter and splinter Z on it. Could one of them work maybe ? I really don't know much about box mods 😅
Our prefered values are:
TCR value 0.001020
Max power: 60Watts
Temp 170C
 

happynomoretobacco

Well-Known Member
Arrived today :rockon:
But i can’t see where i should place the glassballs - how they get fixed in the MP.
My first bowl at 35 Watt was hot so i think i need those Balls to cool the vapor.
Its my first 510 and on demand so i have to try...
Maybe the screens which are on the picture "delivery scope" in beginn of this Thread. If -so i got none also not this o-rings.
@Vape Engineering please clarify
Thx
 
Last edited:

Antrim50

Active Member
Arrived today :rockon:
But i can’t see where i should place the glassballs - how they get fixed in the MP.
My first bowl at 35 Watt was hot so i think i need those Balls to cool the vapor.
Its my first 510 and on demand so i have to try...
Maybe the screens which are on the picture "delivery scope" in beginn of this Thread. If -so i got none also not this o-rings.
@Vape Engineering please clarify
Thx
Get a toothpick and displace the mesh in the top, carefully remove, fill your balls 😉, replace mesh
 

Vape Engineering

Manufacturer
Manufacturer
Arrived today :rockon:
But i can’t see where i should place the glassballs - how they get fixed in the MP.
My first bowl at 35 Watt was hot so i think i need those Balls to cool the vapor.
Its my first 510 and on demand so i have to try...
Maybe the screens which are on the picture "delivery scope" in beginn of this Thread. If -so i got none also not this o-rings.
@Vape Engineering please clarify
Thx

@Antrim50 is right. Please remove the screen and fill the glass beads into the top cap.
Then place the screen back into the groove. This keeps the balls in place.

Maybe it is a bit more clear if you watch the assemble video on YT

 

_dbw_

Active Member
Cool looking product, gutted to see I missed it. Will keep an eye out for the restock - cheers!
 
_dbw_,
Top Bottom