coolbreeze
Well-Known Member
Lol. 19s rock. How do you like the '21?The 20M was my first vapcap and have not bonded with it in any wayAt the time of purchase the 19Ms were still easily available and that's what I'd choose today.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
kel
FuckMisogynists!
There are so many ways to approach the Dynavap.
I tend to vape with the port completely open, loosely filled full chamber, heat until the click, take several (3 or 4) light draws, allow to cool past the click 10 seconds or more, then repeat. Depending on the herb I can get anything up to 7 or 8 cycles which means something in the region of 20-25 'tokes' from one bowl.
I tend to vape with the port completely open, loosely filled full chamber, heat until the click, take several (3 or 4) light draws, allow to cool past the click 10 seconds or more, then repeat. Depending on the herb I can get anything up to 7 or 8 cycles which means something in the region of 20-25 'tokes' from one bowl.
It's very good, smooth airflow and tasty rips every time! I use it for hash only and even after 10+ heat cycles the stem doesn't get uncomfortably hot.
The 19M heats up a little bit quicker because it has less mass to it, so you can go for big rips and clear the bowl in 1-4 cycles. It's by far the easiest one to master
coolbreeze
Well-Known Member
I'm still feeling mine out but the '21 is nice indeed. Can't wait til the VerdiuM gets here, I probably will make it my hiking gear.
coolbreeze
Well-Known Member
Not wrong at all! I have read discussions here where people share and discuss the weights of the various tips and how they think it creates various effects. Good stuff. The new, massive tips work pretty well, I think, and I've seen people recommend them as more IH-friendly. There's also some hard-core cap/year analysis out there, in the Fluxer thread I think.
Anyhow, try them all!
coolbreeze
Well-Known Member
I didn't like them either but with the new tips I think the heat-bearing mass and the horizontal ridges combined with the slightly looser cap may create more convection and certainly more airflow (along with the serrations on the edge of the bowl). I like Omni and Vong bowls for WPAs: good heat retention for big hits, better airflow for less lung strain.
This is close to my technique: straw-fill, light tamp for airspace, first heat to second-click, mouth-to-lung pulls for flavor. Second heat onward I heat low and slow, hit it open airport all the way with some late-bowl feathering. Have you tried the '21 Omni? I think it produces the best flavor so far.
Last edited:
kel
FuckMisogynists!
Hehe this suggestion keeps presenting itself to me via various channels - thank you
I am all paid up on bills and doing okay, but waiting for work and can't spend any money right now! like seriously, no matter how much I want to!
As soon as I am back on top of finances I think I am going to have to try this ...
VapeEscapist
Medicine Buddha
My stubborn ass was I was trying to master the glass Waterwand/Dynacoil using stock set up in my FTV GO IH and it's just too aggressive/hot. Added one silicone pad and it's about where I want it.
I dunno, for dabbing with the Waterwand/DynaCoil I love my FTV GO IH.
Super fast heat up, super fast cool down, very little thought process required for consistent delicious and cool clouds.
Not fucking with a torch is nice too.... A lot of people really enjoy the process of getting high. These days I just want to get high and get on with what I planned to do after. So having a hands free IH to bang out 10 dabs in about as many minutes (or less) is ideal. I also understand people don't have the access to cannabis that I do, so for them being excruciatingly efficient with their flower is necessary. And of course some people are obnoxious optimizers too, which I have been guilty of for some things, so I get it....
I did recently try my IH with flower and it was fine, though maybe I was going too hot, because the taste wasn't very impressive. I can see how there's probably more fine points to vaping flower with DynaVap dry as well.
I dunno, for dabbing with the Waterwand/DynaCoil I love my FTV GO IH.
Super fast heat up, super fast cool down, very little thought process required for consistent delicious and cool clouds.
Not fucking with a torch is nice too.... A lot of people really enjoy the process of getting high. These days I just want to get high and get on with what I planned to do after. So having a hands free IH to bang out 10 dabs in about as many minutes (or less) is ideal. I also understand people don't have the access to cannabis that I do, so for them being excruciatingly efficient with their flower is necessary. And of course some people are obnoxious optimizers too, which I have been guilty of for some things, so I get it....
I did recently try my IH with flower and it was fine, though maybe I was going too hot, because the taste wasn't very impressive. I can see how there's probably more fine points to vaping flower with DynaVap dry as well.
coolbreeze
Well-Known Member
kel
FuckMisogynists!
Chicken No Name
Dazed and confused
Add another pad for flower....?
vandalizedbythelotus
Well-Known Member
you don't need the new omni. you can say the 20M has great flavor but the reality is because of the extra mass it's just lower temp on click, and most of us appreciate clouds. lower temp and flavor is achievable on any other dynavap really by heating higher on the cap or utilizing the low temp cap.Hehe this suggestion keeps presenting itself to me via various channels - thank you
I am all paid up on bills and doing okay, but waiting for work and can't spend any money right now! like seriously, no matter how much I want to!
As soon as I am back on top of finances I think I am going to have to try this ...
Franco
is (most likely) vaping
beyond6strings
Just another traveller in the Cannaverse
Yesterday was cleaning day. I noticed that my caps were really gnarly so I used a brush and a tiny bit of toothpaste and was amazed at how well they cleaned up. And they seem to perform better too.
But my caps may become a rarely used item once I get my Woodscents kit from @Sneaky Pete next week.
I love that Ed is making these stripped down kits available. It’s made it an easy purchase to justify given my large collection of Dynavap and 3rd party stems. The full kits were always too much for my budget and I didn’t need the stems.
I’m really looking forward to using my BB9 with the Woodscents and for more convection heating from my vapcap. And I’ll use my Simrell for water use. They’re my best vong.
Over the past 4 years I’ve tried so many different vaporizers, but always come back to the vapcap. It’s the right dose for me. Especially during the day.
I tired quickly of using a torch, and while I do enjoy using an IH, especially the Wand, I think I’ll enjoy the log vape and the consistent hits it delivers on the vapcap even more.
But my caps may become a rarely used item once I get my Woodscents kit from @Sneaky Pete next week.
I love that Ed is making these stripped down kits available. It’s made it an easy purchase to justify given my large collection of Dynavap and 3rd party stems. The full kits were always too much for my budget and I didn’t need the stems.
I’m really looking forward to using my BB9 with the Woodscents and for more convection heating from my vapcap. And I’ll use my Simrell for water use. They’re my best vong.
Over the past 4 years I’ve tried so many different vaporizers, but always come back to the vapcap. It’s the right dose for me. Especially during the day.
I tired quickly of using a torch, and while I do enjoy using an IH, especially the Wand, I think I’ll enjoy the log vape and the consistent hits it delivers on the vapcap even more.
Smokey McVape
Well-Known Member
coolbreeze
Well-Known Member
And the corollary is that heating the '20 low and slow should help produce more vapor. I think it also suffered from being the first DV with a captive cap, which blew people's minds, and the radically different bowl shape, which seemed counter-intuitive given how the others relied on hot air channels and a tight cap.
If you're unsure, bltkmt, go for the kit and give it a try. Look up videos that show how to heat low and slow and try that if you are unsatisfied with your initial experience. If you are still not there, but want to be, try getting a '21 M tip if the money's not a problem. People also love the old Titanium tip, and I'd recommend the '21 Omni tip, as well. Heating technique might be enough to make it satisfying. I realize this sounds like, "just spend money til you find something," but I'm just saying, many people really love these things, and there's gonna be one that satisfies you too, more than likely.
Another approach: get yourself a new '21 M in the color of your choice and chances are your '20 M will be a freebie!
Last edited:
Cannabiker
Well-Known Member
It was the 2020 that convinced me to go all DV, all the time. I had an '18 and a '19, but both were too flow restricted for my taste. I think my '19 may have shallow grooves--that was supposed to be the year they opened up the airflow, but mine takes a powerful draw. Obviously I liked them anyway--I kept buying them--but they were backups to my Mighty or Argo. With the '20 I felt like I was getting the hit I wanted, and it inspired me to get a Vortex, a wood-stem Simrell w/Stinger, a few IHs, a bunch of tips, a Vong, and Verdium on the way. The Mighty has been gathering dust since.
It feels like heresy to admit it here, but I think the 2020 works great.
It feels like heresy to admit it here, but I think the 2020 works great.
TommyDee
Vaporitor
Dynavap would have never remained in my small arsenal had I not figured out how to make the '18 M flow vape better. Once that was solved, everything else was DV.
I can see how a '20 M could be freeing. I can see how a blem '19 M could be disappointing. The only thing that resembles an original Dynavap in my daily driver is the cap. And they vary all over the map in performance.
I can see how a '20 M could be freeing. I can see how a blem '19 M could be disappointing. The only thing that resembles an original Dynavap in my daily driver is the cap. And they vary all over the map in performance.
vandalizedbythelotus
Well-Known Member
it won't seal with it but extending the omni condenser deeper inside the tip still makes for interesting, noticeable effects.
instead of sealing condenser i'd rather use a carbless stem, i prefer airport play, so i actually like the effect.
TheThriftDrifter
Land of the long vapor cloud
Agree with this. I notice better airflow with a Vong tip than even a 2020M tip. Captive caps used. Well done Dynavap!
Last edited:
Demonic chronic
Chronic Connoisseur. Butane power✊🏴🇺🇦
Dropped my bong bowl and smashed the bastard
, anyone know of a good way to vape hash, I’ve tried in the past with no success in many different vapes.
, anyone know of a good way to vape hash, I’ve tried in the past with no success in many different vapes.