TinyMight / TM 2

[Shorner]

Charred ring only forms on temp 7 or higher (on my TM). So I usually take about 3-4 draws on 6, then 1 massive rip on 9.5. If I take too many draws above 7, that ring gets darker and has the potential to combust on that last pull on 9.5 (I don't stir). This is just a theory of course. But the only times I've combusted was doing multiple high temp hits.

I'm finding the dark ring appears on 6 above on mine, im getting tasty big clouds at 4.
I honestly believe my VAS is now cured with the Tinymight

 

[stark1]

I'm finding the dark ring appears on 6 above on mine, im getting tasty big clouds at 4.
I honestly believe my VAS is now cured with the Tinymight V

Glad that you have found a Chalice of Vapes.

VAS may be satisfied for the time being, but
When the next new bad boi comes along, you, too, will be swept away.

“ Man. What a beast! “

 

[stonedmallone]

something I am not sure of still, have close should the bowl be to the bottom? I kind of just stick it about halfway down

 

[Vaporific]

something I am not sure of still, have close should the bowl be to the bottom? I kind of just stick it about halfway down

Many options and variability here. I keep a small space from the end of the stock short stem. Others don’t use any space. Experiment a bit and see what you like and what works for you. Some have implemented the @dzoinp ( ) heater screen mod which will press and space your flower in the stem.

 

[Cheebsy]

@stonedmallone My "chamber" is as deep as it is wide. I pack medium gind to the end of the stem with a slight tamp.

 

[Vaporific]

@stonedmallone My "chamber" is as deep as it is wide. I pack medium gind to the end of the stem with a slight tamp.

My load is typically the same - deep as is the width of the stem but set back an eight of an inch or so from the end of the stem. Again, this vape avails lots of flexibility and variability. There is no right or wrong way as long as you get the results you want. Try, experiment and see.

Weekend regards to all. Next time I’m bringing my TM with me on the road trip - having fun trading 420 stories with my friend’s partner who I didn’t know was 420 friendly and is still combusting. Don’t worry, I’m trying to educate her about dry herb vapes but my TM is not with me, just my Hopper and Pax ERA; don’t use the Pax that often. Next time I’m bring all my toys - my TM is the king of my roster!

 

[stark1]

Ummm, wrong forum, sorry Mods.
Color me baked nakked.

 

[Shorner]

I was a bit concerned about the charring on my Tinymight at setting 6 ,even at 4 I was getting slight charring, so I emailed Tinymight about it and got a response in 5min!
He said it was probably over calibrated he sent me instructions on how to recalibrate and bingo !! Works like a charm tried a very small load at level 6 no charring whatsoever, then put another load in at setting 8 and got a massive tasty rip slight browning,then put on setting 10 another huge rip and just a slight charred circle, im over the moon with this vape
Great service from tinymight received in 8 days and problem solved in 5 min can't complain about that

 

[Shit Snacks]

After balking on getting one, I may just spring for one. Soon

Anyone with the drop-in glass adapter, is it a 14mm male/female adapter.

Looks like @DDave may take a bit longer to get than to rumage thru my glass
Collection for a fit.

Last communication from him was Jan 27, 2020. Hope he’s coming out of
The woods, soon.

Huh? Didn't you post a photo of yours with that dabox glass stem?? But you're saying you don't even own one...

 

[stark1]

Fuck. Wrong forum.

Was asking about SJK induction heater, My bad.

 

[cybrguy]

Hey @stark1 , bring the babes back. That was the best bag of butts I've seen in a while...

 

[Bad Dog]

Weekend vice feeding

 

[Shit Snacks]

New China Glass Feeding:

 

[cybrguy]

Due to what is riding it, I guess I should post the new glass in here as well. Very anxious to try this out later...

 

[Sour Dream]

https://imgur.com/a/fsCexzL

 

[Tweakz]

Have a good weekends for everyone! With TM, they'll be even better

 

[stark1]

—For outdoors, you may want to streamline your tM, @cybrguy.

You mention that the MP may be a bit short for your comfort.

At 60mm, ~3”, the 16mm Grave Upline taster is almost 2x the length of the tM MP. The extra length,
The CU, and the upline feature of the taster might get your approval. Not to mention the tapered aesthetics.

At $12.99 a piece, it is worth trying (other 16mm tasters are $5.99)....

 

[ezpz]

Hope I'm not late to the party.

https://imgur.com/a/ROpvhhO

 

[stark1]

For Session mode, GRAV® 16mm Octo-tasters w/ various colored silicone skins, to lock and load;
Or have a few pre-loads, for venturing outside. $11.99



[/url

 

[hoyo77]

For Session mode, GRAV® 16mm Octo-tasters w/ various colored silicone skins, to lock and load;
Or have a few pre-loads, for venturing outside. $11.99



[/url

Does the cooling unit fit that glass piece??

 

[androponic]

Does the cooling unit fit that glass piece??

i use the upline tasters sometimes with the TM and no the cooling unit wont fit them.

 

[stark1]

That’s true, both ends are closed/restricted

However, the silicone clad octo-tasters should

[/url

 

[bossman]

I found the Grav upline cooling inadequate and don't recommend it. For outdoor use I'd just rock the short stem maybe with the washers removed from the cooling unit if that's what you're into

 

[cybrguy]

This is still the least difficult way to use the TM without water for me. I can do low temp hits with lessor cooling stems, but when it comes to squeezing that last goodness out of my load when about, it's this or water.

 

[stark1]

Holy Hoss! That’s a long one!
How do you pocket it.