TinyMight / TM 2

[Siebter]

@Tweakz – While I don't know what exactly causes those hickups, I'm sure the crew is fully aware of the situation. I am also sure that the current situation does not meet *their* expectations either.

Anyway. One major suggestion would be: make sure that all customer issues are replied to, so the customer knows his issue is at least known. Also make sure to deal with language barriers.

The worst thing is a customer not knowing what the fuck is going on.

Edit: also make sure the customer understands how to file a complaint via the account, so they won't get swamped with chaotic emails.

 

[justcametomind]

@justcametomind – Have you tried using the capsules (Jackpods, Mistvape & originals) with the lid towards the heater?

Be careful with those Fierce capsules.

Either way I put the capsules the original and mistvape ones wiggle inside, while jackpods are a perfect fit, but airflow (imho) is poor since the vapor production is way less this way and the portion of weed towards the heater is extracted while the rest is still green. I tried with higher temperature but the results is similar.

 

[Tweakz]

@Tweakz – While I don't know what exactly causes those hickups, I'm sure the crew is fully aware of the situation. I am also sure that the current situation does not meet *their* expectations either.

Anyway. One major suggestion would be: make sure that all customer issues are replied to, so the customer knows his issue is at least known. Also make sure to deal with language barriers.

The worst thing is a customer not knowing what the fuck is going on.

Edit: also make sure the customer understands how to file a complaint via the account, so they won't get swamped with chaotic emails.

I fully agree that randomly sending emails only makes it harder to respond . but customers for a long time without getting answers start to panic massively. how can I make sure that at least the responses are received in a timely manner?

 

[Djsleepy]

Also make sure to deal with language barriers.

I found that talking to him with just the specifics for example my case was the button pushed all the way in, after saying twice and not understanding I said “part that button touches needs soldering” and he understood.
So IME less words is better, no fluff or what you did to fix problem!

 

[Siebter]

@justcametomind – Hm. I have both the Mistvapes and the Jackpods (with screwed top lid). They both affect the performance and need a higher temp to work properly (and still stretch the session quite a bit), but when it comes to abv evenness, they are actually pretty good.

how can I make sure that at least the responses are received in a timely manner?

That's the major issue at the moment. We all hate waiting, but waiting without even knowing if an issue is in the works or at least acknowledged is the worst.

So IME less words is better no fluff or what you did to fix problem!

True, but a real solution would include someone on their side who speaks and writes English fluently.

 

[cybrguy]

I truly love my TM, and I have every intention of getting a backup. I will be waiting on an improvement in CS before I make that commitment.
That being said, I have no problems with the one I have...

 

[justcametomind]

I’m sure a TM2, since the revenue he had from the first, is around the corner. I’d love to see a mod that make it glass-less (both stem and inner glass) and so lighter and more durable.

 

[Djsleepy]

I’m sure a TM2, since the revenue he had from the first, is around the corner. I’d love to see a mod that make it glass-less (both stem and inner glass) and so lighter and more durable.

I Wouldn’t count on a new one, he’s still tweaking this one as we learned in a previous post plus with chaos in CS as well as Covid who knows if he has time to even work on a second iteration.

 

[Siebter]

I’m sure a TM2, since the revenue he had from the first, is around the corner.

I agree with @Djsleepy. I own a 1st gen model and current units already have a handful of improvements, so the approach seems to be updating the TM based on the feedback they get.

 

[invertedisdead]

I’m sure a TM2, since the revenue he had from the first, is around the corner. I’d love to see a mod that make it glass-less (both stem and inner glass) and so lighter and more durable.

The stem is just a tube, you could replace it with a tube of any material of equal diameter. Match the ID as well if you want the CU to fit.

 

[angular ocelot]

I’m sure a TM2, since the revenue he had from the first, is around the corner. I’d love to see a mod that make it glass-less (both stem and inner glass) and so lighter and more durable.

have you checked out the availability of the tubing? if you could get a couple of pieces of whatever tubing you prefer of the right size, this should be a very simple modification to make.
the inside diameter of the mouthpiece is the least critical dimension, i would think, as you could rig a glass ball cooling unit.

 

[Siebter]

The stem is just a tube, you could replace it with a tube of any material of equal diameter. Match the ID as well if you want the CU to fit.

Absolutely, for example:


[Taken from →Reddit]

Edit: The picture above shows a test piece, but @Ed's TnT does offer →straight TM stems on his side, which was new to me. These even can house a cooling unit.

 

[Easywider]

Edit: The picture above shows a test piece, but @Ed's TnT does offer →straight TM stems on his side, which was new to me. These even can house a cooling unit.

Oh boy, I've been waiting for these to go up for sale! But $20 shipping on a $40 stem Anyone want to split on shipping to Canada

 

[Shit Snacks]

I would say be advised anyone who buys the blackwood, at these temperatures I would expect some of that ooze out (as it is known to do) which could get in the electronics?...

 

[RustyOldNail]

I would say be advised anyone who buys the blackwood, at these temperatures I would expect some of that ooze out (as it is known to do) which could get in the electronics?...

I also wonder if even the Cocobolo wood stem, would hold up to sitting right above the heater. Granted, the heater is not on very long, but after many sessions and long term, wonder how any wood will fare?

 

[Bad Dog]

I've had my tinymight just over a month so I guess that makes me a expert lol so I've come to post my results. After a initial hiccup of not getting any heptic feedback for the battery level and the vape not working, out of desperation I briefly charged internally and it must have rebooted because from there on I received feedback and the vape worked perfectly. I started out using the long stem with CU but my draw was off, to slow and while I was still getting good clouds I thought they could be better and I was vaping between 8-10. Once I realized a more medium draw speed must make a better pressure differential of air in through the inlets and off the coil I was able to dial back to a starting temp of 6 finishing at 7-8. I was really blown away by how big the clouds were and how much the CU tamed the vapour. After a couple days experimenting I tried my rbt stem and was pretty happy with it but actually found my still wanting to play with the long stem so I kinda put it aside for a while. Up until this point I was vaping the stem as deep as it is wide, with my light course grind it's around .1 a load more than double my load before I got the tinymight so I adjusted the bowl to .05 and kept experimenting but the smaller load size always seemed a little less stable than the bigger one and took more mindful packing. I circled back around to the rbt stem and tried a smaller load, just filling the basket maybe .04-.05 and found I could crush it in one draw, a prefect little one hitter. Been a couple weeks since I last used the long stem the rbt stem is getting all my attention with its little one hitters at temp 10 with the screen two depths down I get prefect brown avb. I think the rbt stem is my favourite, being able to pack loose and not worrying about bud flakes falling down onto heater screen is a major plus, not that it happened all the time but it just one less to have to always check.

The tinymight has quickly found its way into my rotation, more than I was expecting..... had only planned on using it for middle of the night/early morning and maybe walking the dog here and there and at my cousins but thought I'd try and baby it but instead I'm putting it through its paces 5-7 stems a day, sometimes more but not usually less depending on how much of a cbd kick I'm on. Its completely reinvigorated my love of vaping, not that I've been straying lately but its really shaken things up in the best possible way. The convenience can't be understated! I can literally medicate in two minutes start to finish, faster if I have a preloaded stem ready to go. That's faster than a 1/4 of the time my desktop needs to heat up, and I don't have to go to my vape station so I'm free to use it in my easy chair and it's always stays within arms reach.

Only a few minor gripes, first not working out of the box nearly gave me a heart attack but that was soon rectified and hasn't been a issue since, second the battery door had sticky parts in turning and was a little rough but a light scraping with a sharp pick tool got rid of what felt like burrs in the threads and now it's buttery smooth, both but especially one of my CU's were very tight to get in and out so today I replaced the top bigger oring with a smaller one from my many spares which all came red with my order and it's a bit better. Last is my button can be a little hit or miss maybe 15% of the time, I've tried slowing my presses but even that doesn't always do it, i seem to notice it mostly if I'm pressing the top half of the button and don't seem to get it pressing in the middle or toward the bottom. Not a long list of complaints but I guess you could also add the light leak around the bottom but that's not unique to me.

This vape still has a few tricks I'm going to play with, today temp stepping. Trying out all my stems today.... well maybe not all possible stems? I'm running out of time and cognitive ability to try @SquirrelMaster ball stem tonight and really that deserves a full day of experimenting, between the stock stem and long stem I prefer the long it's a little cooler but overall I still prefer the rbt stem. Temp stepping is interesting and I definitely see myself doing it walking the dog to stretch out a session but really prefer just crushing small loads quickly.

This vape is truly versatile, potent, fast, effective and powerful, tiny but mighty indeed and my hats off to the maker for a excellent device I just wish for the sake of others customer service was as good, hopefully as the company grows this improves so our warranties are worth something. Right now I have little to complain about, my order went by the numbers, dhl was fast, I received bonus extras and aside from a initial hiccup which has not repeated I've had a problem free month of operation and hopefully and as much as I would like to say indefinite operation I'd settle for a good long while lol

All this talk about second units seemed so silly, unnecessary, frivolous, extravagant.... until I received mine. Now I'm pondering picking one up for my mom to replace the crafty that doesn't work well for her needs so I can give it to my cousin who appreciates a larger bowl. My mom is also a evening/middle of the night user just like me, or at least that's when my need is greatest so sharing my one tinymight just isn't particularly feasible. So now the money I've been putting aside for a flux deluxe is now for a new tinymight last I heard the flux wait list was at least 10 months so I could probably save up for 2 before my name gets called, no stress there. I was going to do a accessory order anyway wanted a second long stem and was going to ask about buying heater screens and a extra retaining ring, I like extras. Now that will have to wait until I order my second unit but I think I'll get the wheels in motion and send off a email with my requests now since it will be a bit of a wait. Am I really going to ride this bronco again? I think so yes

 

[slayyou]

Oh boy, I've been waiting for these to go up for sale! But $20 shipping on a $40 stem Anyone want to split on shipping to Canada

Yea nearly $80 CAD for a stem is no Bueno, maybe if all my glass stems break first, even then though...

 

[CremeFraiche1127]

Did you take it apart (bottom screw) and clean all the contact points discussed earlier in the thread?

I just wanna say that taking it apart and cleaning it at all the points mentioned in the post you linked me to got the unit working back to normal for the last couple days! Even changing the battery it's been chugging like normal. Hopefully this lasts but for now thank you for the help!

 

[Breaking Bud]

So I've been reading FC too much lately and it has me jonesing for another vape. I currently use several Airvapes, Fury 2, Davinci Miqro and a Crafty. TM is definitely of interest but so is the Davinci IQ2 and possibly The Mighty. My apologies if a 3 way comparison has been previously discussed but I'm interested in someone's take who has all 3. Anybody? Also, if anyone is interested in discussing trading a problem free TM for another vape, please DM me. I have others I haven't mentioned.

 

[Shit Snacks]

So I've been reading FC too much lately and it has me jonesing for another vape. I currently use several Airvapes, Fury 2, Davinci Miqro and a Crafty. TM is definitely of interest but so is the Davinci IQ2 and possibly The Mighty. My apologies if a 3 way comparison has been previously discussed but I'm interested in someone's take who has all 3. Anybody? Also, if anyone is interested in discussing trading a problem free TM for another vape, please DM me. I have others I haven't mentioned.

This actually isn't the place to post asking for comparisons, try ask FC, I will tell you though that the tinymight is on demand pure convection unlike those two which are session vapes and conduction driven... Of course you already have crafty and miqro, so basically the TM is going to be very different from anything you've ever tried! Also not really allowed to ask to trade here, have to post in the classifieds when you have enough

 

[Breaking Bud]

This actually isn't the place to post asking for comparisons, try ask FC, I will tell you though that the tinymight is on demand pure convection unlike those two which are session vapes and conduction driven... Of course you already have crafty and miqro, so basically the TM is going to be very different from anything you've ever tried! Also not really allowed to ask to trade here, have to post in the classifieds when you have enough

Thanks. New and learning the rules as I go along. I apologize if I stepped over a line.

 

[Bad Dog]

Can anyone confirm or deny that the rbt XL8R cooling stem will work as a tinymight wpa? I feel like I saw George vapefiend use it in a video? I wouldn't think you could adjust the bowl size as big as a regular rbt short stem but that isn't a concern as it would only be used to micro dose .05 . I can't source any regular stems where I live but I can get the XL8R and if it works it would be my backup

 

[BestBuds]

Can anyone confirm or deny that the rbt XL8R cooling stem will work as a tinymight wpa? I feel like I saw George vapefiend use it in a video? I wouldn't think you could adjust the bowl size as big as a regular rbt short stem but that isn't a concern as it would only be used to micro dose .05 . I can't source any regular stems where I live but I can get the XL8R and if it works it would be my backup

I used it regularly that way, until it cracked. It's just a hairline but I use it with my Mi2 only again.

 

[Alton]

There's no customer support and warranty for the device right now. I love the vaporizer itself, but the lack of support was completely disappointing. The only thing you can - pray, that your device does not break.

My device had a problem with a jammed battery cover a month ago, I couldn't open or close it and emailed to the support with this issue on 20th of august.

The seller replied to me in the middle of October and recently I've got the replacement for the upper cover.

I hope everything will be ok with the support in future (and also hope I wouldn't need it)

The new cover is made of a sligtly different material

 

[lookhigh]

I registered on the tinymight site to buy one or preorder.
Prices where only in dollars and there is a 24percent vat added on?
Total $330.66
Tooo much
edit, i am in the EU after all.