Healthy Rips FURY EDGE

[Drops]

That’s a really awesome idea. I’d love the stl file so I could print my own.

Great job on the design! I need to get better at modeling and dialing in my printer.


If you’re willing to pay for shipping, I can print one for you and send it your way?

https://www.thingiverse.com/thing:4176420 (Not sure why pic not showing up)

I am about to upload it and will add link to this post, but wanted to mention that I made it thin.. the main part is .7mm thick. I printed it in PETG with .3 1st later and .2 all other layers. I will add the link and remove just this sentance that says I will add the link later and to tell @pootsforjesus to let me know if they want me to make it thicker and post another file.

Also to @HealthyRips.com if you want to use my design and mass produce and sell with pods or just additional tool for podsters like me I am 100% fine with that, as long as you let me beta test new vapes for you... lol.. mostly kidding about the beta part.

Ever thought of mass production for extra income?

I have a day job but from link you can have others print for you. If you did you can also tip me. I make decent money, more than most my age with no degree but could always use more but not sure I want the extra work of making stuff. I 3d print for fun, make it a job and I will not like to do it.

 

[pootsforjesus]

https://www.thingiverse.com/thing:4176420 (Not sure why pic not showing up)

I am about to upload it and will add link to this post, but wanted to mention that I made it thin.. the main part is .7mm thick. I printed it in PETG with .3 1st later and .2 all other layers. I will add the link and remove just this sentance that says I will add the link later and to tell @pootsforjesus to let me know if they want me to make it thicker and post another file.

Thanks a ton for this man! I'll hop right on printing it out this weekend. Any particular reason you used PETG instead of PLA or ABS? Did you feel it needed the extra strength?

I 3d print for fun, make it a job and I will not like to do it.

I feel you on that. My wife and friends try to talk me into printing shit and selling it on Etsy. My prints are passable at best and turning it into a business would kill the enjoyment of playing with the thing.

 

[Drops]

@pootsforjesus not really I print mostly in PETG these days being now that its dialed in it's almost a clean as my PLA prints but a lot stronger. I have tons of colors of PLA just got sick of whatever PLA I left in the printer snapping off each time I would let it sit for more than a few days without printing.
(sorry mods if this is getting too far off topic)

 

[pootsforjesus]

@Drops - I printed the holder out earlier this morning and it does the trick quite well! Thanks again for sharing the print file!

I'm going to try and edit the file a bit and add a bottom to the capsule opening. The diameter of the opening is perfectly sized for the capsule, but I had some trouble having it stay within the tool and not sliding out while scooping. My plan is to have the depth of the bottom somewhat shallow so it'll be easy (theoretically ) to pop the lid on and remove the capsule once filled.

 

[Drops]

@Drops - I printed the holder out earlier this morning and it does the trick quite well! Thanks again for sharing the print file!

I'm going to try and edit the file a bit and add a bottom to the capsule opening. The diameter of the opening is perfectly sized for the capsule, but I had some trouble having it stay within the tool and not sliding out while scooping. My plan is to have the depth of the bottom somewhat shallow so it'll be easy (theoretically ) to pop the lid on and remove the capsule once filled.

I was planning on doing the same just did not get around to it.. I can add it and post a v2 tonight. First was too tight and it loosens over time. Either that or I was going to go tighter and leave the front open so it grabs it better. Sort of C shaped instead of circle.

EDIT:Quick and Dirty V2 is up, let me know if you want any other changes but I may clean that one up tonight. I did not print it so no pic.

 

[pootsforjesus]

I was planning on doing the same just did not get around to it.. I can add it and post a v2 tonight. First was too tight and it loosens over time. Either that or I was going to go tighter and leave the front open so it grabs it better. Sort of C shaped instead of circle.

EDIT:Quick and Dirty V2 is up, let me know if you want any other changes but I may clean that one up tonight. I did not print it so no pic.

V2 works a ton better for me! Thanks a lot for the update.

I guess I’ll switch gears and make a capsule filler tray instead.

 

[Drops]

V2 works a ton better for me! Thanks a lot for the update.

I guess I’ll switch gears and make a capsule filler tray instead.

I usually just one off them so no plan on filling try here, that's why I went this route sorta a single fill tray, I use back side of a thumbtack to pack it a little.

Glad it worked better, I never even printed v2 myself. I will make sure to update when V3 goes up..
Will make v1\v2 obsolete.

 

[pootsforjesus]

I usually just one off them so no plan on filling try here, that's why I went this route sorta a single fill tray, I use back side of a thumbtack to pack it a little.

Glad it worked better, I never even printed v2 myself. I will make sure to update when V3 goes up..
Will make v1\v2 obsolete.

Nice, man! I'll look forward to it. Now that you mention it though, I had a thought earlier tonight.

Instead of rounding the back of the handle, what do you think about making it more pick-like? It's a bit difficult at times to get the abv out of the capsule. Making the end of the handle more pick-like would turn it in to an all-in-one tool for assisted filling and stirring.

 

[Drops]

Hmm.. I keep a thumb tack here, one of those metal ones that is the same style as the plastic ones, good for packing them as well. Let me print v3 and make sure it works like I hope then I will upload it. I can see about making a pick version as well. Fits kinda tight, may need to adjust that but I was going to use it a little and see if it works itself looser. @pootsforjesus Please let me know if you print if its also tight in PLA.

Updated...

 

[CaptVapor]

How are the dosing capsules, are they worth getting? I don't need it to be discrete on the go or whatever (though I can see that being a nice feature), I'm thinking it might just keep the oven cleaner.

 

[OF]

How are the dosing capsules, are they worth getting?

That's a mighty subjective question to ask, IMO the only way to know how useful they might be to YOU is for you to get a set and try? They're cheap enough, again IMO.

They will keep things cleaner, of course. And are a big advantage in stealth. But they also reduce the volume for herb by about half, so you might need two to get your usual 'barefoot' dosage. They also slow heat conduction into the load (SS is a poor chose of metal in this area) so 'heat soaks' become even more important. You can, of course, raise the heat a bit to offset this.

IMO a real advantage is with concentrates. I enjoy bubble hash and traditional pressed hash in mine. Again, going to 20F or so more heat. Several sessions per load. Oils and waxes on a bit of cotton also work well, as does keif. I often carry one so loaded in my pocket in case the normal herb load 'doesn't do the job'. Easy to dump the ABV and drop the capsule in a carry on. And on. And on. If you have access to such goods, I think the capsules should definitely be tried in this mode.

Your call, but for $15 you can know for sure...….

Regards to all.

OF

 

[proceeds_the_weedian]

IMO a real advantage is with concentrates. I enjoy bubble hash and traditional pressed hash in mine. Again, going to 20F or so more heat. Several sessions per load. Oils and waxes on a bit of cotton also work well, as does keif. I often carry one so loaded in my pocket in case the normal herb load 'doesn't do the job'. Easy to dump the ABV and drop the capsule in a carry on. And on. And on. If you have access to such goods, I think the capsules should definitely be tried in this mode.

Your call, but for $15 you can know for sure...….



OF

I think you just sold me on the caps. I had a brainfart and forgot to add them onto my original order. I've been trying to convince myself that I don't need them. But the other day my "nest" of hash and hemp fiber was snatched by an errant gust while reloading.I almost dropped the open silicone container holding the rest of my weeks stash scrambling for it. Really harshed my mellow.
The chamber reduction and added conduction are boss for my use. You load em straight, @OF ? Was thinking I'd continue with lil hemp wrap for hygiene. But I could see gaining some omph to the vapor from the hash on metal interface

 

[OF]

You load em straight, @OF ? Was thinking I'd continue with lil hemp wrap for hygiene. But I could see gaining some omph to the vapor from the hash on metal interface

If I follow your question, yes I only use filler (cotton in my case these days) with concentrates that could melt down into the works between hits. Oils, waxes and the like. Bubble and 'hard pressed' hashes go in directly and generally fill the capsules. I usually empty them out hot/warm (heat to maybe 250F?) holding the body in a wooden clothes pin. It's pretty easy to get the lump of spent hash separated from the SS body and out, generally in a single chunk. Then I scoop them full again and recap. Nothing leaks out, the oven stays clean.

I wouldn't sweat the 'should have ordered them with the unit' part. Unless you have unusual shipping issues they ship fast and free (no additional cost going separately). I manage to lose them (some I've given out to friends who own F2s to try out that don't come back.....) so have ordered the capsules alone several times. HR is happy to take my money and ship the parts the next day. Good folks, you know. We're blessed to have such sellers.

Regards,

OF

 

[CaptVapor]

Just ordered one for a trip next week! I wanted something compact and plastic (broken glass on a trip would be a bummer) and am pretty confident I went for the right choice. The Crafty+ was on my list but it's more $$ and I dislike the maintenance that the cooling unit requires. Not into Pax type vaporizers so that crossed a bunch of other vapes off my list... Vapcap is nice, torch is very un-stealth.

Looking forward to it!

 

[proceeds_the_weedian]

If I follow your question, yes I only use filler (cotton in my case these days) with concentrates that could melt down into the works between hits. Oils, waxes and the like. Bubble and 'hard pressed' hashes go in directly and generally fill the capsules. I usually empty them out hot/warm (heat to maybe 250F?) holding the body in a wooden clothes pin. It's pretty easy to get the lump of spent hash separated from the SS body and out, generally in a single chunk. Then I scoop them full again and recap. Nothing leaks out, the oven stays clean.


OF

Well damn, gonna try that! I was considering placing an extra screen on the bottom of the chamber, crumble or pancake the hash onto it and covering with the SS wool pad. I used the pad to to top loads a couple of times early on, and kind of wonder if it didn't make for thicker vapor. Your way sounds simpler, though. I like simple.
Don't you stir or re-crumble the hash at all? I get way more vapor when I poke at the hash/fiber. Actually, the last two bong seshes with the edge have hit me harder than normal, with pretty heavy cloudage. I suspect re-crumbling the load halfway to be the main factor.
Your hash might be purer than mine though? My stuff is high quality, but still commercial import so probably not the cleanest.

 

[OF]

Don't you stir or re-crumble the hash at all? I get way more vapor when I poke at the hash/fiber. Actually, the last two bong seshes with the edge have hit me harder than normal, with pretty heavy cloudage. I suspect re-crumbling the load halfway to be the main factor.
Your hash might be purer than mine though? My stuff is high quality, but still commercial import so probably not the cleanest.

I only do so if it's too hard pressed. I'll vape it a bit to break it down some first, then poke it with a toothpick. Otherwise heat soaks gets it done.

We have excellent quality, tested goods in our Dispensaries. Bubble hash is generally fine grained and 60 to 80% THC and free of insecticides and such. Kief as well tends to be potent and 'clean'.

I too like simple, and predictable results. Give it a try?

OF

 

[Drops]

Ok, this works so much better.
File <uploaded> already. I did add a corner cleaner option but does not work well.. i will make one with a shiv for ya @pootsforjesus if I get time later.

 

[CaptVapor]

Another dumb question, the manual says to charge the Edge for 2 hours the first time but after an hour the battery indicator says it's full. Can I just take this thing for a trial run or what?

 

[OF]

Another dumb question, the manual says to charge the Edge for 2 hours the first time but after an hour the battery indicator says it's full. Can I just take this thing for a trial run or what?

It's yours, you can do anything you want with it. IMO, however, you should follow the clear instructions unless you've got a good reason not to. That is you understand the reason and 'know better'? This advice is aimed at giving you the best possible battery life. HR wants you to have that you see, but the call is yours. Otherwise they have no reason to give the advice, right?

The very first charge, even before any serious discharge (like 'testing' the heating.....) is different. It determines the absolute maximum capacity it will ever have. The first serious discharge ends that possibility for the life of the unit. It will only degrade from there until it's retired or discarded. Important since unlike vapes like Fierce, the battery can't be replaced by the owner. When it's 'dead' so is the vape it's in.

So, they really do know what they're saying. And IMO the advice is sound, I've long advised it in vapes that don't mention it ('overcharge the first time only before any use') in fact. This, along with sound battery management (like avoiding deep discharges and standing at full charge) can double or more your useful service.

Good information here on the general topic:
https://batteryuniversity.com/index.php/learn/article/how_to_prolong_lithium_based_batteries

Again, your call, but my advice is to follow the instructions. Hopefully you didn't "just take this thing for a trial run" in which case do as you wish, you've lost the opportunity for maximum performance.

OF

 

[HealthyRips.com]

Hi FC Family! We hope you are all safe and healthy!

Our 4/20 Sale is Live Now!

Get 15% OFF Store Wide Now - April 20! Coupon Code: 420
FURY 2 available now for under $95!
FURY EDGE available now for under $125!
FIERCE available now for under $160!

Free USA shipping as always.

We appreciate you all, and wish everyone the very best during this difficult time.

Sincerely,
Healthy Rips Team
https://www.healthyrips.com

 

[chimpybits]

Woo hoo 420 HR!
After pfaffing about for months looking at the P80 and the fluxer but always chickening out due to cost, I'm ready to pull the trigger on this more affordable option.

My Fury 2 has been a champ. Dropped many times, tabs broken so mouthpiece no longer snaps into place, pad and cover lost, and plenty of staining of the oven, and it just keeps going.

Time to upgrade. So many accessories to choose from. I think I'm going with a set of dosing capsules, WPA, and 3D flow stem with the Edge Bundle including bent glass MP.

Who knows which MP I'll reach for the most or if I'll even use the capsules, but I guess bases covered. Costs are still pretty small. It would be nice if I could have the 3D stem as part of the bundle (saving a few more $), but that's getting fussy.

EDIT: trigger pulled!

 

[ParanoidAndroid998]

Thinkin about grabbing one of these. How's the flavor? Any plasticky taste?

 

[C No Ego]

Thinkin about grabbing one of these. How's the flavor? Any plasticky taste?

isolated clean air path ( stainless steel) ... there could be a bit of manufacturing smell in the very beginning but goes away quickly ...

 

[GoldenBud]

Thinkin about grabbing one of these. How's the flavor? Any plasticky taste?

Never felt any plastic taste with Fury2

 

[Mr. Me2]

Looking for suggestions/recommendations for the best accessories to get with the Edge. If you’re not a water or bubbler user, what are must haves (extra screens?), and what would be the best package?

I think the Edge comes with a lot. The bent glass mouthpiece is tempting but may not be necessary if the stock mouthpiece is comfortable(which I know it is on the Fury2). And the 3D flow stem may be great. Is an upgraded stem needed? I know the Fury2 is cool with the stock mouthpiece.

Is having extra o rings and screens helpful? Or the dosing caps? Any other HR accessories?

Decisions, decisions. Any help is much appreciated!