Ghosthunter987
Member
The silicone tubes fit inside a 14mm female, but having a ground glass adapter just makes it easy to attach and achieve an airtight seal.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Wohoo 
100 pages log in the fog !
GH just cut a silicon ring off the stem and put it over the stem so it becomes double . This fits 18 mm
100 pages log in the fog !GH just cut a silicon ring off the stem and put it over the stem so it becomes double . This fits 18 mm
OhTheAgony
here for the chicks
Muut said:
Yay, nice find dude!
I'll order one right away and let you know, hopefully before the end of this week, lol
That happens to be my fav bongshop btw, can't believe I missed that little pipe myself.
To bad it has a carb hole but we'll just have to plug that up I guess.
edit: I was rambling on about the one in the first link you posted btw, just to clarify.
Not sure what your budget is, but you might like these as well:
8 arm bub
cheap stemline bub
Thanks Gonzo! But it looks like there is finally a hammer style bub available in Europe ^^, so I'll give that one a go first. Kinda hard to pass up on for just 17 euro's. This one has a mouthpiece of just over 6" so it should be in between the two you mention. Keep those pics coming though plz
Congrats on the 100 pages Dave! Lets ad another 0 to that aye
Good idea to ship the Dogs without adapters to 220V countries btw, seems the simplest solution for now. Perhaps you can also offer 220V customers the car adapter instead of the discount if they want to get their own inverter?
OhTheAgony said:Congrats on the 100 pages Dave! Lets ad another 0 to that aye
Good idea to ship the Dogs without adapters to 220V countries btw, seems the simplest solution for now. Perhaps you can also offer 220V customers the car adapter instead of the discount if they want to get their own inverter?
Thanks OTA! That's a good idea about the car adapter and I'd be fine with that if that's what someone wanted to do. Speaking of car adapters did you ever unscrew the tip of your and see if the fuse is blown?
OhTheAgony
here for the chicks
Yeah, it was just the fuse luckily. I keep forgetting to pick up a replacement though, I'll put that on my to do list for tomorrow right away.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
SD_haze
Well-Known Member
OhTheAgony said:Muut said:
Yay, nice find dude!
I'll order one right away and let you know, hopefully before the end of this week, lol
That happens to be my fav bongshop btw, can't believe I missed that little pipe myself.
To bad it has a carb hole but we'll just have to plug that up I guess.
edit: I was rambling on about the one in the first link you posted btw, just to clarify.
Not sure what your budget is, but you might like these as well:
8 arm bub
cheap stemline bub
Thanks Gonzo! But it looks like there is finally a hammer style bub available in Europe ^^, so I'll give that one a go first. Kinda hard to pass up on for just 17 euro's. This one has a mouthpiece of just over 6" so it should be in between the two you mention. Keep those pics coming though plz
Congrats on the 100 pages Dave! Lets ad another 0 to that aye
Good idea to ship the Dogs without adapters to 220V countries btw, seems the simplest solution for now. Perhaps you can also offer 220V customers the car adapter instead of the discount if they want to get their own inverter?
Just a glass headsup there.
1st off thats not a stemline, thats what is called an INline, which is a lot more common.
Secondly, black leaf is a china import brand. Its better than the worst ones but its still what it is. Tree percs, inlines, and other fancier percolation styles coming imported from china often have pretty restrictive drag and tend to be a lot more fragile. Things snapping off with minor bumps and such.
Chinese inlines are also known for splashing water back, where a properly made one will never, ever do that.
They're still a an affordable price and will function, I just wouldn't whip it out with a lot of people using it if I were you.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
+1 Imo black leaf products are crap.. One of my friend had quite a collection from the local heashop.. The straight tube were ok but the percs we really low quality,,
Gonzo said:
Thanks dude. Any idea how much they cost? I can't seem to find prices on the site. I think I'd go with the BC 49 as I like the looks and functionality of something smaller and simpler.
@ everyone - anybody have one of the BC 49 pieces they want to trade me for 2 AquaVapes? Anyone? Anyone?
WatTyler
Revolting Peasant
I thought the same but I recently picked up one of their top models and it's almost flawless. The 10 arm tree is perfectly and evenly cut and the joins look clean. It does compare in cleanliness to my german magic glass and beats my USA made green goddess glass piece. I can only assume that either I was lucky, or that they have upped their game on their upper range models?Abysmal Vapor said:
But I'm still liking some of the Silika glass. I want the PB 15. Seems they're just a wholesaler? Dave, it seems that the signs in the stars say that you should become a stockist of vaporizer glass
OhTheAgony
here for the chicks
That ^^, + Muut was looking at Weedstar glass, I don't think he'll mind the BL brand.
Thanks for the correction on the stem type though SD, I'm still a bit of a noob when it comes to all the different types of diffusion out there.
I'm so glad Muut came up with that one Gonzo, I really like the wide flared mouthpiece as well. I hope it gets here soon!
Dave, I got a new fuse, but I measure 16,9V from the car adapter
Do you think that's still safe to use? I had my UD on the car adapter for a day or 3 before but it was when my multimeter was lost so I have no way of knowing at what voltage it was operating at that time. I assume it was the same though, I can't imagine that just changed by itself when I blew the fuse, or can it..?
I may have to return my inverter and swap it for another one, I get the same voltage directly from the inverter.
The strange thing is that I was still stuffing my UD under the blankets even with that 17V thing to get it hot enough *scratches back of head*
Thanks for the correction on the stem type though SD, I'm still a bit of a noob when it comes to all the different types of diffusion out there.
I'm so glad Muut came up with that one Gonzo, I really like the wide flared mouthpiece as well. I hope it gets here soon!
Dave, I got a new fuse, but I measure 16,9V from the car adapter
Do you think that's still safe to use? I had my UD on the car adapter for a day or 3 before but it was when my multimeter was lost so I have no way of knowing at what voltage it was operating at that time. I assume it was the same though, I can't imagine that just changed by itself when I blew the fuse, or can it..?
I may have to return my inverter and swap it for another one, I get the same voltage directly from the inverter.
The strange thing is that I was still stuffing my UD under the blankets even with that 17V thing to get it hot enough *scratches back of head*
OhTheAgony
here for the chicks
Hmm, interesting...now how do I measure this to be sure without cutting up the wire-insulation? Or would you happen to know a reliable way to calculate this?
OhTheAgony
here for the chicks
That does look like a handy little fucker, I hope they sell those locally.
I guess it's back to the electronics store tomorrow, thanks!
I guess it's back to the electronics store tomorrow, thanks!
Remember that you will also need a socket to plug your power supply into. If you don't like soldering, there is a "matching" socket that has screw terminals also. The wires coming from the socket are then screwed into that plug that I linked to. Otherwise you will need to cut the wires from the power supply and attach them directly to the new plug.
OhTheAgony said:Dave, I got a new fuse, but I measure 16,9V from the car adapter
Do you think that's still safe to use? I had my UD on the car adapter for a day or 3 before but it was when my multimeter was lost so I have no way of knowing at what voltage it was operating at that time. I assume it was the same though, I can't imagine that just changed by itself when I blew the fuse, or can it..?
I may have to return my inverter and swap it for another one, I get the same voltage directly from the inverter.
The strange thing is that I was still stuffing my UD under the blankets even with that 17V thing to get it hot enough *scratches back of head*
As Hazy pointed out the voltage will drop under load and should be fine. Once dropped it should be in the 12-13.5 range as that is the spec'd output for car systems and that's what you're replicating with the inverter, etc. So yeah I imagine it will be fine.. only one way to find out..
Busy busy busy around here.. there's a litter of pups here about ready begin their lives with a new family.
I've got 15-20 pieces including a few custom pieces about done just applying a couple last touches then to take pictures and stick these bad boys (and girls) up on the website.
I've got 15-20 pieces including a few custom pieces about done just applying a couple last touches then to take pictures and stick these bad boys (and girls) up on the website.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Mmm ! Never thought i fell for Zoophilia , but can't wait too see some dog porn now 
.
! Never thought i fell for Zoophilia , but can't wait too see some dog porn now .
Abysmal Vapor said:Mmm
http://i.imgur.com/ddse1.gif
Hahaha you must have quite the search history Abysmal..
dorkus_molorkus
Well-Known Member
ROFL! 
that be sum funny shit.
my new puppy 'Vino' is in the post & is expected tomorrow. (hopefully),
that be sum funny shit.
my new puppy 'Vino' is in the post & is expected tomorrow. (hopefully),
OhTheAgony
here for the chicks
underdog said:As Hazy pointed out the voltage will drop under load and should be fine. Once dropped it should be in the 12-13.5 range as that is the spec'd output for car systems and that's what you're replicating with the inverter, etc. So yeah I imagine it will be fine.. only one way to find out..
I guess I'll just try it out then, I had it on there without a problem (besides blowing a fuse) for 3 days already earlier so I'm not really worried. Worst thing that can happen is I blow another fuse, right? And I got a bunch of those just to be safe. Looking forward to using the pup again later on, I'm getting a bit tired of torching and my Solo isn't all that satisfying anymore after having used a Dog.
Can't wait to see the new pups, that's been a while
Dorkus, I'm glad to hear you successfully snagged that one! I was keeping an eye on that thread in the classifieds and it stayed so quiet in there I thought the seller changed his mind or something. I really hope you like it!
ps: what do you other dog owners use to keep there filled stems upright? Some pictures would be nice if you have anything you'd like to show off. I've tipped over quite a few already, loosing a partly used or even fresh load in the process. I was going to make a small bowl stand out of wood, but then I realized that what I had in mind was still to light to be stable enough so I ordered me some of these (18 as well as 14mm) to see if those will work.
I also like this one, but the price is just ridiculous imo:
edit link
Perhaps you could make something like that too Dave, for a slightly more reasonable price hopefully? A round carousel shaped one would be nice too I think.
