Discontinued Pinnacle Pro

Lizard King

Well-Known Member
I'm holding am all glass solution with a removable o ring in my hand. I think it's the one, I'm posting video soon, I need feedback ASAP please

I like the look of that. Have you vaped with it yet? Are you planning to use ss mesh or glass screens to prevent the particles coming through? How hot does it get after multiple sessions?

+1 on the silicone o-ring
 
Last edited:

bellas

Well-Known Member
I bought extra mouthpiece and Pong during the Pinnacle holiday sale . I hope Pinnacle will replace these as well as the one that came with my unit.
 
bellas,

herbivore21

Well-Known Member
I think a glass screen that fits in the middle of the bullet and the GonG would be ideal, a fritted one if possible? That would make the PNP as good a portable as it could be IMO.
 
herbivore21,

Sativape

Well-Known Member
I think a glass screen that fits in the middle of the bullet and the GonG would be ideal, a fritted one if possible? That would make the PNP as good a portable as it could be IMO.

@ herbivore,

The surface of fritted glass seems fragile.

I held one in my hand and I don't think it can withstand the pressure of being sandwiched between 2 hard surfaces.

I'd think there would be risk of bits of fritted glass being inhaled.

It would be possible to have a fritted glass filter contained in a glass washer/ring that took the load of the gong.

Or if the fritted filter was contained in the gong like this:

http://fuckcombustion.com/threads/david-goldsteins-fritted-disc.5930/#post-223762

The alternative is just popping in a metal screen in between the bullet and glass gong.
 
Last edited:
Sativape,

herbivore21

Well-Known Member
Indeed, it would need to be done in one of this way. Silicone o-rings seem again to be something that could be used too.
 
herbivore21,
  • Like
Reactions: Sativape

Sativape

Well-Known Member
It doesn't need a screen, used it all night without one. I'm looking into oring options today

@ TherealVaporblunt,

Please clarify.

In the video, the gong is completely through-hole.

You had no screen between the bullet and the gong?

How can ground bud not be drawn up through a screenless path?

Also, while inverted when the PNP is placed into a bubbler, wouldn't ground bud simply fall through?
 
Sativape,

TherealVaporblunt

Well-Known Member
Manufacturer
@ TherealVaporblunt,

Please clarify.

In the video, the gong is completely through-hole.

You had no screen between the bullet and the gong?

How can ground bud not be drawn up through a screenless path?

Miracle of science , but no particles come through. Originally I was using an old school brass screen just covering the top of the bullet, but I ditched it because It had a funny taste . No screen worked great
 

Sativape

Well-Known Member
Miracle of science , but no particles come through. Originally I was using an old school brass screen just covering the top of the bullet, but I ditched it because It had a funny taste . No screen worked great

@ TherealVaporblunt,

You must be working with some sticky icky dank material!

Thanks for confirming.

Looking forward to the release.

Any chance you guys can release a black glass version?

This would definitely help keep the PNP low key.
 
Sativape,

TherealVaporblunt

Well-Known Member
Manufacturer
@ TherealVaporblunt,

You must be working with some sticky icky dank material!

Thanks for confirming.

Looking forward to the release.

Any chance you guys can release a black glass version?

This would definitely help keep the PNP low key.
No chance it comes in black. Engineering is working on his glass pong, which will likely cost more yet be more stealth.
 
TherealVaporblunt,
  • Like
Reactions: Sativape

Sativape

Well-Known Member
No chance it comes in black. Engineering is working on his glass pong, which will likely cost more yet be more stealth.

@ TherealVaporblunt,

Thanks for confirming.

So the 3D CAD drawing that Engineering posted, is a version that might be released?

I was worried that you guys scrapped that design since your video came out.

The glass insert/pong option definitely stays true to the original design and looks so nice.

The pong will actually protect the glass too in the 3D CAD version.
 
Sativape,

TherealVaporblunt

Well-Known Member
Manufacturer
@ TherealVaporblunt,

Thanks for confirming.

So the 3D CAD drawing that Engineering posted, is a version that might be released?

I was worried that you guys scrapped that design since your video came out.

The glass insert/pong option definitely stays true to the original design and looks so nice.

The pong will actually protect the glass too in the 3D CAD version.

Yes, we are working on both solutions. Mine most likely will be available very soon, I am not sure on the status of his.
 

Sativape

Well-Known Member
Yes, we are working on both solutions. Mine most likely will be available very soon, I am not sure on the status of his.

@ TherealVaporblunt,

Thanks for confirming.

Good to hear that VaporBlunt will be releasing both types.

Customers definitely will appreciate the fact that they'll have the option of choosing between the 2.
 
Sativape,
  • Like
Reactions: OMEiAM

Burnttoast22

Eats your cake in front of you
Took the plunge and ordered one of these bad boys with a water tool from theyoyokid1 a few days ago.. With any luck it should turn up sometime next week.

Total bummer that the water tools are out of stock and I have to wait a couple of weeks before he can ship it out to me.

Are the new pong or gong adapters being shipped with the units now?
 
Last edited:
Burnttoast22,

TherealVaporblunt

Well-Known Member
Manufacturer
Took the plunge and ordered one of these bad boys with a water tool from theyoyokid01 a few days ago.. With any luck it should turn up sometime next week.

Total bummer that the water tools are out of stock and I have to wait a couple of weeks before he can ship it out to me.

Are the new pong or gong adapters being shipped with the units now?

Right now the only one that exists sits in my ashtray so I'm not sure of the answer to when we will start including them.
As for the water tool back order, since we lowered our price to destroy the f bombs price, the sales are through the roof!!!! We are so slammed, and the fact we now offer an attachment called "the aardvark" that works like a nectar collector is only making it busier. Most companies would raise the price back up, but I am not convinced that's the right move. To summarize, big discounts equal long waits for now
 

Burnttoast22

Eats your cake in front of you
I can easily live with a two week wait, the fact that the price has come down so much is well worth the minor inconvenience!

I think I paid $238 for the Pro+WT which works out as being cheaper than if I bought just the Pro with no WT from a UK dealer.

Keep up the fantastic work, I will almost be certainly be buying some more accessories from you in the near future!

e2a: This Aardvark thing intrigues me, can't find any info about it on your site though. Do you have a link you can give me with some info?

thanks
 
Last edited:
Burnttoast22,
  • Like
Reactions: Sativape

Grim Chiclets

Well-Known Member
Lol when I pull the right speed, my PnP makes the funniest little whistle haha.. it's hilarious, but gets annoying.. it's..... a conundrum.

EDIT: Holy crap what is this Aardvark, I already want it :o
 
Grim Chiclets,

VapeWeeed

New Member
^ I have had the same above issue which I emailed TRVB about and had no response to. Please do this TRVB!

I think they just ignore the emails..I have emailed them a few times and have never received a single response. Sent them the picture of my melted PonG..still waiting for a response.
 
VapeWeeed,

TherealVaporblunt

Well-Known Member
Manufacturer
The ones on the site..thevaporblunt@gmail.com and VAPORBLUNT1@gmail.com
If the emails weren't received I can try re-sending them. I have not received a response from either.

Here's the post about it in this thread http://fuckcombustion.com/threads/pinnacle-pro.10651/page-155#post-555899
Call 818-231-0782 and talk to Liz. Tell her your problems, make sure and give her your email and ask why you didnt receive a response.

I'm about to post video of the aardvark, if you look closely at the end a glob of molten oil drips off and lands on my thumb............. FUCK that hurt!!!!!!

I present the aardvark
 
Last edited by a moderator:

TherealVaporblunt

Well-Known Member
Manufacturer
We are supporting the upcoming launch of simbaglass.com the stuff they are producing is great. We also have a new WT coming. Their website should be up and running in 30 days. They will start taking phone sales sooner than that. I'll keep you all updated. Actually, I'll start a page in the glass threads once it's going. They will be making all of our water tools from now on, so it's going to be a good year for our glass line!

Edit: my glass pong looks like it's going to retail for $14.99, does that price seem reasonable?
 
Top Bottom