1. What does SSTB mean? See our glossary of acronyms.

Maud-Dib Concentrate Box

Discussion in 'Portable Vaporizers' started by NinjaMindTriks, Dec 21, 2013.

  1. Stu

    Stu Maconheiro Staff Member

    Messages:
    5,449
    Location:
    Southeast of Disorder
    This mod was done for research purposes only and should not be done by anyone that wants to keep their warranty intact. Do not try at home.... or at work for that matter. Celebrity voices impersonated.

    :peace:
  2. MileHighLife

    MileHighLife Self-Sufficient Stoner

    Messages:
    768
    Location:
    CO
    Last edited: Jan 25, 2014
    SSVUN~YAH and Vicki like this.
  3. steama

    steama Well-Known Member

    Messages:
    629
    I was going to purchase the maud-dib beta but after all the reports of very hot cough inducing vapor I think I am going to pass.

    The only way this device would work for me is as a bong attachment to cool and condition the vapor. Coughing is not what I am into.

    I have a MFLB with the PA 2.0 and the mini-bubbler which using is like wearing a straight jacket to use, it does work. This solution would suck big-time for the maud-dib because there is to much shit to deal with.

    Drilling a hole in the bottom of the device to fit to a bong was BRILLIANT and should be manufactured with an eye towards this as a solution. A simple plug could be fitted on the final maud-dib to plug the hole for non-bong use. After all the thing is in beta so just do what NEEDS to be done. Otherwise I need to look for a different solution. Peace.
    :science:
    Last edited: Jan 26, 2014
    SSVUN~YAH and MileHighLife like this.
  4. JoeKickass

    JoeKickass Well-Known Member

    Messages:
    2,788
    I can't believe how beautiful this is:
    [​IMG]

    But it's a shame the actual technology is so outdated. I can tell from how bright the screen gets that it looks like it will make very smokey tasting vapor:
    [​IMG]

    I would stick with a Dr. Dabber or VaporBros Dabbler :2c:
    thesoloman, SSVUN~YAH and steama like this.
  5. MileHighLife

    MileHighLife Self-Sufficient Stoner

    Messages:
    768
    Location:
    CO
    Agreed ... I think magic flight should release a WPA that is all glass. It should fit into the stem hole and then do a 90 degree turn into a gong joint. This would work the same as Stu's setup but no drilling necessary ...
    SSVUN~YAH, Stu and steama like this.
  6. RUDE BOY

    RUDE BOY Space is the Place

    Messages:
    2,515
    There are some 90s that'll work. I know someone that uses his Launch Box with the "infamous pipesDaddy vapor bubbler"and no whip The box mates to the glass whip adaptor like it was made for it.
    SSVUN~YAH and steama like this.
  7. steama

    steama Well-Known Member

    Messages:
    629
    I am not going to give up on the MD yet but will not purchase either. I am going to wait and see if magic-flights presents a fix for the MD's harsh hit personality.
    I like your idea MileHighLife better than the hole in the bottom idea.
    Last edited: Jan 26, 2014
    SSVUN~YAH and MileHighLife like this.
  8. gvape

    gvape Well-Known Member

    Messages:
    490
    This mod is awesome and I'm quite tempted to do it. Or at least see if I can have a glass stem made with a 90. The box Does hit a bit hot and the tube collects a lot. I still think it needs some more work. Still need to to try it with a Water pipe.
    SSVUN~YAH and steama like this.
  9. Buildozer

    Buildozer Well-Known Member

    Messages:
    1,196
    Location:
    S. California
    Drawing air through the box, helps keep the glow at bay.. I personally back off the power if I see it start to glow.. I try to keep it just before glowing, just like w/ the Ti nail..

    IMO this thing tastes comparable to my Omicron..

    They used to make the WPA, which I think would be perfect for the MD.. From what I can tell so far, IMO having the air flow down under the screen, rather than across it, seems to greatly reduce the risk of spillage..
  10. sundaddy

    sundaddy Well-Known Member

    Messages:
    371
    Did those Beta models shown have a screen or a solid metal tray? Another Question, as most people that dab know "full-melt" is rarely 100% pure, there is usually a micro amount of carbon left on a nail, even with oil. Does the MD burn so hot that, if this built up, you could just brush it off of the screen after it cools off, or is there another method for cleaning?
  11. Vicki

    Vicki The Bionic Woman

    Messages:
    5,584
    My beta Maud Dib box has a screen on the tray.
  12. sundaddy

    sundaddy Well-Known Member

    Messages:
    371
    Thanks for the reply Vicki, mine should be here in the next few days. Did you ever get the Kava taste out of yours?
  13. Vicki

    Vicki The Bionic Woman

    Messages:
    5,584
    Yes, finally, after a few sessions. I've been using my Maud Dib box for concentrates because my Dr. Dabber pen died. It hurts my throat and makes me cough, though. I wish I could figure out a way to filter through the bubbler I already have, a Pinnacle Hydrotube.
    SSVUN~YAH likes this.
  14. herefishyfishy

    herefishyfishy Member

    Messages:
    7
    Just got mine yesterday. I'm not sure why you guys are having such harsh hits. Not to offend anyone, but could it be the quality of your full melt?

    I have access to extremely pure high quality BHO, and I tried the smallest dab (which I thought would not let me feel anything at all to be honest)..and while I noticed it was the tiniest bit harsher than my mflb (but actually not as harsh as my G Pen), it tasted amazing, was fully gone in about 2 seconds after battery engagement, and got me ripped for several hours. I used to included whip.

    Based on initial experience, this is going to be my new favorite personal possession for a long time to come.

    Also, how have people been enjoying the Kava Oil it comes with? Never tried it before, what can I expect?
    vapirtoo and SSVUN~YAH like this.
  15. Quetzalcoatl

    Quetzalcoatl SPACE GOD

    Messages:
    4,318
    Location:
    SDCA, 3rd Planet
    You don't have the whip attachment? Put a glass stem on the MD and hook it up with the whip!
    SSVUN~YAH likes this.
  16. SSVUN~YAH

    SSVUN~YAH You Must Unlearn, What You Have Learned...

    Messages:
    1,607
    Location:
    # Town
    Lol, you guys are my vaping idols! Hey Superman was that a fun sized snicker? Awesome mod to the maud, clean that worm!
    Stu, Quetzalcoatl and Buildozer like this.
  17. RUDE BOY

    RUDE BOY Space is the Place

    Messages:
    2,515
    What about a HA mouthpiece on the end of a whip ?
    Vicki and SSVUN~YAH like this.
  18. JSteez4205

    JSteez4205 aka Gordon NugzB

    Messages:
    282
    Vicki~ I used the VaporBrothers mini hydrator 14mm adapter to attach a small amount of silicone tubing to the glass mouthpiece on both ends and then put the adapter in the bottom of my PNWT when I want to use that option..
    Vicki and SSVUN~YAH like this.
  19. Vicki

    Vicki The Bionic Woman

    Messages:
    5,584
    I might, I'll have to check, but I need to hook it up to water.
  20. Quetzalcoatl

    Quetzalcoatl SPACE GOD

    Messages:
    4,318
    Location:
    SDCA, 3rd Planet
    Oh, sorry, I meant the water pipe whip adapter... my bad. Just got done with a Solo sesh :zzz:
    SSVUN~YAH, Vicki and RUDE BOY like this.
  21. Adobewan

    Adobewan Well-Known Member

    Messages:
    660
    Location:
    So Cal
    SSVUN~YAH and Quetzalcoatl like this.
  22. Vicki

    Vicki The Bionic Woman

    Messages:
    5,584
    I just looked, and I do have a water pipe whip adapter! I forgot I had it! :lol:

    I just tried it, and it worked! Thank you! :)

    I'm getting ready to use my MFLB water pipe adapter with my beta Maud Dib box, thanks to @Quetzalcoatl
    Last edited by a moderator: Jan 31, 2014
  23. Buildozer

    Buildozer Well-Known Member

    Messages:
    1,196
    Location:
    S. California
    We're all stoners playing w/ toys, as Stu likes to put it.. LOL I think that's a good way to put it.. It's always fun rigging experiments up, and testing stuff out.. IMO there is almost always a way to rig any vape up to do what you want, depending on how far you are willing to go :science:.. The Modd-Dib is pretty sweet.. I'm glad that it happened.

    It would work just the same as it does w/ the LB... I don't own a WPA but I don't see how it couldn't work.. For some reason, I thought those WPA's got discontinued when the WPW came out.

    :lol: I was thinking, "I'm pretty sure Vicki has to have a WPW".. haha
    Last edited: Jan 30, 2014
    SSVUN~YAH, Quetzalcoatl and Vicki like this.
  24. Vicki

    Vicki The Bionic Woman

    Messages:
    5,584
    It does work exactly the same!! :nod:

    My left arm is in a cast right now, so it's kinda awkward for me to do. Hopefully I'll get better at it with some time. :)
    SSVUN~YAH, RUDE BOY and Quetzalcoatl like this.
  25. sundaddy

    sundaddy Well-Known Member

    Messages:
    371
    Hope you get to feeling better! As far as long term residual build up, do you foresee a problem? Should I just cook the heck out of it after each dab?
    steama and Vicki like this.

Support FC, visit our trusted friends and sponsors