• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Muad-Dib Concentrate Box

JoeKickass

Well-Known Member
I can't believe how beautiful this is:
yNOwiez.png


But it's a shame the actual technology is so outdated. I can tell from how bright the screen gets that it looks like it will make very smokey tasting vapor:
W8ODrUU.gif


I would stick with a Dr. Dabber or VaporBros Dabbler :2c:
 

MileHighLife

Blower of glass, grower of grass
I was going to purchase the maud-dib beta but after all the reports of very hot cough inducing vapor I think I am going to pass.

The only way this device would work for me is as a bong attachment to cool and condition the vapor. Coughing is not what I am into.

I have a MFLB with the PA 2.0 and the mini-bubbler which using is like wearing a straight jacket to use, it does work. This solution would suck big-time for the maud-dib because there is to much shit to deal with.

Drilling a hole in the bottom of the device at fit to a bong was BRILLIANT and should be manufactured with an eye towards this as a solution. A simple plug could be fitted on the final maud-dib to plug the hole for non-bong use. After all the thing is in beta so just do what NEEDS to be done. Otherwise I am looking for a different solution. Peace.
:science:

Agreed ... I think magic flight should release a WPA that is all glass. It should fit into the stem hole and then do a 90 degree turn into a gong joint. This would work the same as Stu's setup but no drilling necessary ...
 

RUDE BOY

Space is the Place
There are some 90s that'll work. I know someone that uses his Launch Box with the "infamous pipesDaddy vapor bubbler"and no whip The box mates to the glass whip adaptor like it was made for it.
 

gvape

Well-Known Member
This mod is awesome and I'm quite tempted to do it. Or at least see if I can have a glass stem made with a 90. The box Does hit a bit hot and the tube collects a lot. I still think it needs some more work. Still need to to try it with a Water pipe.
 

Buildozer

Baked & Fried
I can't believe how beautiful this is:
yNOwiez.png


But it's a shame the actual technology is so outdated. I can tell from how bright the screen gets that it looks like it will make very smokey tasting vapor:
W8ODrUU.gif


I would stick with a Dr. Dabber or VaporBros Dabbler :2c:
Drawing air through the box, helps keep the glow at bay.. I personally back off the power if I see it start to glow.. I try to keep it just before glowing, just like w/ the Ti nail..

IMO this thing tastes comparable to my Omicron..

Agreed ... I think magic flight should release a WPA that is all glass. It should fit into the stem hole and then do a 90 degree turn into a gong joint. This would work the same as Stu's setup but no drilling necessary ...
They used to make the WPA, which I think would be perfect for the MD.. From what I can tell so far, IMO having the air flow down under the screen, rather than across it, seems to greatly reduce the risk of spillage..
 

sundaddy

Well-Known Member
Did those Beta models shown have a screen or a solid metal tray? Another Question, as most people that dab know "full-melt" is rarely 100% pure, there is usually a micro amount of carbon left on a nail, even with oil. Does the MD burn so hot that, if this built up, you could just brush it off of the screen after it cools off, or is there another method for cleaning?
 
sundaddy,

Vicki

Herbal Alchemist
Did those Beta models shown have a screen or a solid metal tray? Another Question, as most people that dab know "full-melt" is rarely 100% pure, there is usually a micro amount of carbon left on a nail, even with oil. Does the MD burn so hot that, if this built up, you could just brush it off of the screen after it cools off, or is there another method for cleaning?

My beta Maud Dib box has a screen on the tray.
 
Vicki,

Vicki

Herbal Alchemist
Thanks for the reply Vicki, mine should be here in the next few days. Did you ever get the Kava taste out of yours?

Yes, finally, after a few sessions. I've been using my Maud Dib box for concentrates because my Dr. Dabber pen died. It hurts my throat and makes me cough, though. I wish I could figure out a way to filter through the bubbler I already have, a Pinnacle Hydrotube.
 
Just got mine yesterday. I'm not sure why you guys are having such harsh hits. Not to offend anyone, but could it be the quality of your full melt?

I have access to extremely pure high quality BHO, and I tried the smallest dab (which I thought would not let me feel anything at all to be honest)..and while I noticed it was the tiniest bit harsher than my mflb (but actually not as harsh as my G Pen), it tasted amazing, was fully gone in about 2 seconds after battery engagement, and got me ripped for several hours. I used to included whip.

Based on initial experience, this is going to be my new favorite personal possession for a long time to come.

Also, how have people been enjoying the Kava Oil it comes with? Never tried it before, what can I expect?
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Yes, finally, after a few sessions. I've been using my Maud Dib box for concentrates because my Dr. Dabber pen died. It hurts my throat and makes me cough, though. I wish I could figure out a way to filter through the bubbler I already have, a Pinnacle Hydrotube.
You don't have the whip attachment? Put a glass stem on the MD and hook it up with the whip!
 
Quetzalcoatl,
  • Like
Reactions: SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Well, I no longer wonder. :D

Excuse the first 3 minutes or so of Buildozer and me acting like stoners. :lol: I could've edited it, but I am too lazy....and some might find it entertaining.


After the initial hi-jinx, Buildozer was able to finally do his worm. I give you... Buildozer's Worm (giggity):


:peace:
Lol, you guys are my vaping idols! Hey Superman was that a fun sized snicker? Awesome mod to the maud, clean that worm!
 

RUDE BOY

Space is the Place
Yes, finally, after a few sessions. I've been using my Maud Dib box for concentrates because my Dr. Dabber pen died. It hurts my throat and makes me cough, though. I wish I could figure out a way to filter through the bubbler I already have, a Pinnacle Hydrotube.
What about a HA mouthpiece on the end of a whip ?
 

JSteez4205

aka Gordon NugzB
I wish I could figure out a way to filter through the bubbler I already have, a Pinnacle Hydrotube.

Vicki~ I used the VaporBrothers mini hydrator 14mm adapter to attach a small amount of silicone tubing to the glass mouthpiece on both ends and then put the adapter in the bottom of my PNWT when I want to use that option..
 

Vicki

Herbal Alchemist
Oh, sorry, I meant the water pipe whip adapter... my bad. Just got done with a Solo sesh :zzz:

I just looked, and I do have a water pipe whip adapter! I forgot I had it! :lol:

I just tried it, and it worked! Thank you! :)

I've been puzzled about this since the release, does the MFLB WaterPipe Adapter not work with the Maud Dib?
http://www.1percent.com/magic-flight-vaporizer-waterpipe-adapter.html

I'm getting ready to use my MFLB water pipe adapter with my beta Maud Dib box, thanks to @Quetzalcoatl
 
Last edited by a moderator:

Buildozer

Baked & Fried
Lol, you guys are my vaping idols! Hey Superman was that a fun sized snicker? Awesome mod to the maud, clean that worm!
We're all stoners playing w/ toys, as Stu likes to put it.. LOL I think that's a good way to put it.. It's always fun rigging experiments up, and testing stuff out.. IMO there is almost always a way to rig any vape up to do what you want, depending on how far you are willing to go :science:.. The Modd-Dib is pretty sweet.. I'm glad that it happened.

I've been puzzled about this since the release, does the MFLB WaterPipe Adapter not work with the Maud Dib?
http://www.1percent.com/magic-flight-vaporizer-waterpipe-adapter.html
It would work just the same as it does w/ the LB... I don't own a WPA but I don't see how it couldn't work.. For some reason, I thought those WPA's got discontinued when the WPW came out.

I just looked, and I do have a water pipe whip adapter! I forgot I had it! :lol:

I just tried it, and it worked! Thank you! :)
:lol: I was thinking, "I'm pretty sure Vicki has to have a WPW".. haha
 
Last edited:

Vicki

Herbal Alchemist
It would work just the same as it does w/ the LB... I don't own a WPA but I don't see how it couldn't work.. For some reason, I thought those WPA's got discontinued when the WPW came out.


:lol: I was thinking, "I'm pretty sure Vicki has to have a WPW".. haha

It does work exactly the same!! :nod:

My left arm is in a cast right now, so it's kinda awkward for me to do. Hopefully I'll get better at it with some time. :)
 

sundaddy

Well-Known Member
Hope you get to feeling better! As far as long term residual build up, do you foresee a problem? Should I just cook the heck out of it after each dab?
 

Buildozer

Baked & Fried
It does work exactly the same!! :nod:

My left arm is in a cast right now, so it's kinda awkward for me to do. Hopefully I'll get better at it with some time. :)
Yeah, using the LB or MD w/ glass seems to be more of a 2 arm operation for me.. I forgot about your arm.. You'll get a good one arm system going, you just need a little time to adapt!

Hope you get to feeling better! As far as long term residual build up, do you foresee a problem? Should I just cook the heck out of it after each dab?
I have never cleaned mine.. I have only used clean extracts in mine and my screen is still fine IMO.. I don't know how a good Full melt would do in there, or if you would be able to burn it off well enough.. I would try it out if I knew where to find some.. In my area, I haven't seen any find full melt or any bubble hash at all, for a while now.. It seems like most all of places near me only carry wax now, if any concentrate.
Thanks. :) My Maud Dib box has a big build up on the bottom, under the screen. I'm always scraping it off.
Do you hit it kind of fast.. Maybe try to hit it slow? I suspect that the air intake being to beside the screen, combined w/ a rapid draw, may be encouraging more leakage.. It almost seems like it could be being sucked over the edge of the screen IMO.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I must admit with my recent physical therapy and new limited range of arm motion I forgot you were still in a cast @Vicki :( perhaps a little easier if you have a regular bubbler (I think you mentioned one?) compared to the two-handed operation of a MD and PNWT.
 
Top Bottom