Dynavap VapCap

[Mr. Me2]

Same thing here with the sliding opening on dugouts.

So after asking you guys and stating my position, I went and handed my wife the closed dynastash and asked her (with no explanation) to smell it. She said it smelled "very faintly of weed"... So to you and @lookhigh and @flotntoke I concede the point.

So now I may also be looking for some kind of insert, haha. I'll let you guys know if i find something.

Does anyone know the dimensions of the silicon container insert in the Dynastash ER? I may have a suggestion...

Space Case makes an aluminum storage container that may work in place of the silicon container...

https://www.amazon.com/gp/aw/d/B006...=TS6BGR5QPVGK43FN09VT&dpPl=1&dpID=512ARL0Ew9L

Don't know if that link will work. Here's hoping.

 

[flotntoke]

Same thing here with the sliding opening on dugouts.

So after asking you guys and stating my position, I went and handed my wife the closed dynastash and asked her (with no explanation) to smell it. She said it smelled "very faintly of weed"... So to you and @lookhigh and @flotntoke I concede the point.

So now I may also be looking for some kind of insert, haha. I'll let you guys know if i find something.

As a few others have noted, it's often hard for those of us who are around it often to smell it as well - same as with many other things (smoking, coffee, cologne, B.O., your dog, the usual smell in your house/room). Where I find it is really an issue are in two cases.... Being near someone (like at a bar) who uses occasionally, but hasn't in a while or has been stuck with dirt weed. They'll sniff you out in a heartbeat! Also, those who used to smoke, but don't anymore. Not that either are weed-junkies or anything. Just that they know the smell well, but haven't been exposed recently. The best thing I have for these situations is when you see that look on their face like they are trying to figure out a smell, interject quickly with a "Yeah... smells like somebody in here must have been sprayed with a skunk". Follow this with a "I'm going to go figure out who", and slip away to put your stash in the car. The bar thing can be very bad because you may be sitting there for a while with the smell gradually building up in your pocket or near you. One move that releases that potent pocket of heavenly scent can give a brief cloud similar to sticking your nose in a fresh jar of nugs.

#2) If you leave your stash in a DynaStash or anything else not airtight on a warm day, you'll notice it as soon as you get in the car. Forget about the dogs, any half decent LEO will get a good whiff as soon as you open your window to talk to him. Better to be odorless and safe than sorry!

 

[Lookatmeglow]

Does anyone know the dimensions of the silicon container insert in the Dynastash ER? I may have a suggestion...

Space Case makes an aluminum storage container that may work...

https://www.amazon.com/gp/aw/d/B006...=TS6BGR5QPVGK43FN09VT&dpPl=1&dpID=512ARL0Ew9L

Don't know if that link will work. Here's hoping.

Link worked for me on mobile. No idea if it will fit in the dynastasher though.

 

[snamuh]

Thanks!
Thanks!

Thanks!

Thanks for the tip, I will have to try that, but after I hear from Dynavap.


Lol! Thanks!

This guy! Thanks, the holes have ridges that prevent the omni from going in completely.


Free Porn!

I just got my dynastash, I have the same issue with my regular vong stem (14mm), it gets too tight to go in all the way.

Otherwise I dig it!

 

[Dynalowrider]

For all you folks having trouble with screens.
Go to the hardware store and pick up a stainless steel M8 bolt about 1 inch long and (2) two nuts for same. with the nuts on the bolt you can lock in the right depth to push the screen into the grooves you want. I'm talking about the new metal "snowflake" screens. The nuts keep you from pushing the screen in too far.
To be honest the best tool for installing and removing the screens is the Omni. Doc

 

[Squiby]

pick up a stainless steel M8 bolt about 1 inch long and (2) two nuts for same. with the nuts on the bolt you can lock in the right depth to push the screen into the grooves you want

Great idea! I'm on it! Thanks!

I was just using a chopstick and trying to apply even controlled pressure. A bolt/nut stop is a much better idea.

 

[Farid]

The wooden dowels that come with the underdog are a perfect fit as well.

 

[Joaon]

Long time, so much new members to VapCap Family ..

I received a couple weeks back the Omni condenser/mp for my Vong, and it is a pleasure !
No more carb hole feathering, perfect airflow, easy peasy

I still enjoy to use the OG VapCap with turbine condenser as well! I love to see the oil forming ..


On an other hand, does someone heat up his VapCap(s) with wood fire?
I've seen a video, but otherwise it doesn't seems to be popular..
I'm minding on a solution to protect the o-rings from heat/flames on a long metal sterm,
so you could dig it right on embers/fire pit for couple of seconds without minding. Click click, happy camper !

 

[tsp247]

Quick question(s). Looking at picking up a vapcap. Will I regret not picking up at Ti woody now compared to the og?
Any differences between the 2 besides asthetics? If I go Ti woody any difference between xls and regular?
Comments, thoughts, suggestions

 

[Winegums]

Quick question(s). Looking at picking up a vapcap. Will I regret not picking up at Ti woody now compared to the og?
Any differences between the 2 besides asthetics? If I go Ti woody any difference between xls and regular?
Comments, thoughts, suggestions

The Ti tip is nearly unbreakable and if treated properly should last indefinitely. You can customize the tip with other bodies to hook up with water pieces or offer a different feel to the vapcap. I think that it's worth getting the Ti version over the OG if you can.

 

[muunch]

Get both? One you won't cry if you lose/break and one you can treat like your baby.

Personally, I just bought a used cocobolo, bought a new MP+condenser and made it a XLS. I like it better with a mouthpiece, but the difference in vapor quality between XL and XLS is negligible imo.

If I only had to pick one (but I wouldn't bc that's no fun), I'd just wait for the release of the NonaVonG bc it looks glorious.

 

[Vapor_Eyes]

I'm one of those that likes to put material directly in my Dynastash. I only ever put in as much as I'll use in a few days so I don't have to worry about it drying out.

I'm lucky enough I don't have to worry about the smell, but I've never noticed it before. The lid on my stash was a tiny bit loose when I got it and I immediately tightened it up, I don't know if that made a difference. I'm pretty sure I've done the car test and it passed, but it's been a while so I could be wrong.

I like to use stuff in its stock configuration as much as possible, I don't like extra stuff getting in the way, so I have no desire for a container to fit inside the Dynastash. It seems a lot of people do, there might be a market there for George. Maybe he could make an optional titanium sleeve or something like that to go inside the stash compartment.

 

[Xelatsok]

Woooody
Blackwood + Dynavap silicone MP + some MP borrowed from cigarette holder. The later restricts a draw to my liking and cools vapor a bit.

Wooly
Vapcap OG dressed with the custom stocking my wife generously knit for me. This is my desperate attempt to protect and save my last glass body, the last one out of 5 I had And this stocking restricts a draw as well. I do prefer to not play with the carbs.

Omni mod is coming...
My Carbon Omni is great overall but I dislike metal MP, which I will mod sometime too.

 

[Kasish]

After enjoying my tiwoody for about a month now ive noticed that from finishing a bowl in 3 hits it now pretty much cleans my bowl in 1 hit (smallest size).
Still haven't decided if i like it better or not O_o.

 

[Ed's TnT]

Good morning, so I got a big shipment of WS stuff in from Geroge and ohhh check out what else he stuffed in the box, very cool. The NonaVong is very nice, Ill be honest I like my pieces round, I am not much of one for change, I totally get not wanting it to roll and thats a big deal to many but not so much to me, Ill just put it away somewhere so it wont roll. Thing is George has done a great job. the side that has the carb has a slight texture so you can feel that side in the dark or where ever, you dont have to look for it, you can feel it very cool. Ohh its burl too so you know i love that, the stash is bad ass, I like how it has the larger bores so it can hold the larger VC, ohhhh and get this it mates with the WS gotta love that so its a winner winner yall!

Thanks George, really appreciate you!

 

[TheVaporist]

@Xelatsok the wool sleeve is as lovely as it is ingenious! Kudos to your lady!

@Ed's TnT Nice burl, nice stash and especially nice attention coming from George!
The new logo feel more in place with the modern look of the NonaVong to me.

 

[mandelbrod]

love that new logo, its fat and makes the fore- and background really separated, it fucks your mind in a gentle way. Also you have to look at it twice to notice it has something to do with vap or vaping, for the people who don't have to know any better, the stach looks like it might as well be a wooden shel for a ssd drive or a power bank, very inconspicuous compared to the old logo that plainly said "DYNAVAP" with vape comming out of the D.
Just noticed my order departed from the states, Can't wait for that Wisconsin wood to land in my own Babylon.
shout out to Matt and the costumers service in general. they are legendarily nice and will help in any way that is possible to them.

 

[Hogni]

Does anyone know the dimensions of the silicon container insert in the Dynastash ER? I may have a suggestion...

Space Case makes an aluminum storage container that may work in place of the silicon container...

https://www.amazon.com/gp/aw/d/B006...=TS6BGR5QPVGK43FN09VT&dpPl=1&dpID=512ARL0Ew9L

Don't know if that link will work. Here's hoping.

Would never put my herbs directly into the DynaStasher so I prefer to order a DS 2G and using a doob tube or JyArz aside of it.

DV should offer an glass/plastic/ti insert for it themself. There is a demand for sure. Guess nearly everyone who's ordering a Dynastash would also order the insert.

Otherwise I'm pretty sure, that @Ratchett would change measures of his doob tubes for a fitting one on demand. Has anyone ask him for?

 

[The Beagle]

DV should offer an glass/plastic/ti insert for it themself.

Absolutely, that's the main reason why I haven't ordered a stash yet.

 

[Hogni]

Ordering a 2G one cant be a mistake

 

[Vap974]

Hi there!
i just want to speak about the new tip!
i've got my omnivap for 10 months now and i really love this little thing!

I couldn't believe that a conduction vape could give me this taste!
So a new tip with more air should give me a better taste?

Well don't be surprised, but i prefer the old tip.
i find that you can easily adjust the air flow on the omnivap with the older tip.
Whereas with the new one, even if you adjust your omnivap on a retricted air flow.....you have to much air and so, less density in the vapor.
Perhaps i need to play with the new tip again and again.....!
But don't get me wrong i find the original omnivap so good !!

 

[snamuh]

Already broke both glass bodies, lol. One fell from my lap and the other one fell like 5 inches!

I tried sanding my dynastash so that the 14mm vong would fit, but no luck with what I have to use.

Edit: sanded more... Seems fit alright but a little snug.... I don't mind.

 

[tsp247]

Get both? One you won't cry if you lose/break and one you can treat like your baby.

Personally, I just bought a used cocobolo, bought a new MP+condenser and made it a XLS. I like it better with a mouthpiece, but the difference in vapor quality between XL and XLS is negligible imo.

If I only had to pick one (but I wouldn't bc that's no fun), I'd just wait for the release of the NonaVonG bc it looks glorious.

Thanks to @peaceonearth I just got both

 

[cybrguy]

Would never put my herbs directly into the DynaStasher so I prefer

I have been, but I would rather an option for an insert of some kind. Even if it would slightly reduce capacity.

 

[Chose]

So after about 6 weeks of using the omni I love it I love my woody but there's something about the omni so cool
I've experimented with diferent air flow
Load sise
Heating position on cap and boosting the hits
And all I can say is on most vapes you have several temp selections and not mutch more to play around with quite boring actually
But vapcaps are interesting and fun to use
I recon there are a billion combinations you can use its endless
I love it it's like finding your soulmate vape