flyfishwino
Well-Known Member
Also had an iolite years ago.And that's why there's chocolate and vanilla...
Does the GH work when charging?
Also had an iolite years ago.And that's why there's chocolate and vanilla...
Honest answer... I don't know. I have an external charger and have only used that. I have 3 batteries and am in constant rotation. It's the only way to go...Also had an iolite years ago.
Does the GH work when charging?
So would you the mighty be a better fit for home yet only considering crafty issues?Honest answer... I don't know. I have an external charger and have only used that. I have 3 batteries and am in constant rotation. It's the only way to go...
Same as the crafty it works but the battery will die.Also had an iolite years ago.
Does the GH work when charging?
Does the GH work when charging?
It seems that the Crafty issues have died down, based on a big drop off of posts here. Many people on fc have upgraded from the Crafty to the Mighty, and I never read of regrets for those who have. I think the choice depends on your intended use. If you're a heavy user or will likely share with others, the Mighty may be a better fit. But to some, size matters. Also, some prefer a self contained unit (Mighty), and others don't mind the use of an app (I never need the app).So would you the mighty be a better fit for home yet only considering crafty issues?
Then go with the GH for traveling around. Does it really take a year to get one delivered as I wax reading on he shipping forum?
Reading this, the GH and FF2 forums. Seems to be a bunch of production issues for all of these units. Tough to make a decision when seeing all the problems.
It seems that the Crafty issues have died down
I swear! I didn't mean to tempt the fates, Kraken or otherwise...Don't summon the Kraken Mr. Me2!
Right after reading your message my crafty was acting weird (not kidding)!
The heating blinking was quick (like the empty battery one) and the crafty went directly on the boost temp and would not stop on the base temp, no matter what, it was stuck on boost (and max temp as intended) and after a full cycle of discharge/charge it was back to normal...
So beware of the Kraken fellow craftyer
On another dark side, the battery meter isn't calibrated, when the crafty app or the libi one say 0%, I can do another warm-up and a quick pull before he died And I've noticed the same thing with my previous one.
Although, some overheating was invited in the party recently, I don't know where they came from!
So far my 9 month old 2.10 Crafty is at 111 hours so far, using it on 190\210 all the time
What FW?My Crafty just broke again, press the button and it goes red, vibrates then turns off. I can keep pressing the button and it will do this, I cant charge it. Maybe it will blow up.
This one lasted 7 months.
What FW?
When it misbehaves that way, with temp spiking and light flashing, try a 'factory reset' to default settings by holding the power button on for 10 seconds.Don't summon the Kraken Mr. Me2!
Right after reading your message my crafty was acting weird (not kidding)!
The heating blinking was quick (like the empty battery one) and the crafty went directly on the boost temp and would not stop on the base temp, no matter what, it was stuck on boost (and max temp as intended) and after a full cycle of discharge/charge it was back to normal...
So beware of the Kraken fellow craftyer
On another dark side, the battery meter isn't calibrated, when the crafty app or the libi one say 0%, I can do another warm-up and a quick pull before he died And I've noticed the same thing with my previous one.
Although, some overheating was invited in the party recently, I don't know where they came from!
So far my 9 month old 2.10 Crafty is at 111 hours so far, using it on 190\210 all the time
Damn I had hopes for this version..FW 2.10
Does the app notify you of a problem (when mine crapped out, the app basically confirmed it).My Crafty just broke again, press the button and it goes red, vibrates then turns off. I can keep pressing the button and it will do this every time. I cant charge it, I put the cable in and it cycles through green, red, blue. Maybe it will blow up.
This one lasted 7 months.
FYI: the crafty never pulls more than 1A even on a power-bank that can deliver 2.1A - this info might be useful to users that want to buy some power-bank for their crafty
Check your cable and the USB pins on the monitor that are made from China tin foil. They are very cheap and are usually the problem. My Crafty pulls around 1.5A sometimes a little more if it's completely flat. Charge current is constant until near the end of charge, when it switches to constant voltage charging. Other times it will slow the charge is if battery temp is above the set point. If battery is too hot then it will not charge at all.FYI: the crafty never pulls more than 1A even on a power-bank that can deliver 2.1A - this info might be useful to users that want to buy some power-bank for their crafty
FYI: the crafty never pulls more than 1A even on a power-bank that can deliver 2.1A - this info might be useful to users that want to buy some power-bank for their crafty
I've posted this in the other thread (FF2). I'm working 24/7, busy to even have a second to myself so I am unable to read through these pages yet.
I'm willing to purchase a high end vape. Air, Crafty, PAX2, or FF2.
Are the issues with the crafty fixed yet? Battery, internal issues still being a problem?
I have 2 of the 4 you list (pax2 and Crafty) and also have followed the ff2. Having said that, people seem to love the air.I've posted this in the other thread (FF2). I'm working 24/7, busy to even have a second to myself so I am unable to read through these pages yet.
I'm willing to purchase a high end vape. Air, Crafty, PAX2, or FF2.
Are the issues with the crafty fixed yet? Battery, internal issues still being a problem?