Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

E

EmDeemo

ACCOUNT INACTIVE
btka said:
can I use this vape in europe 220v... if yes do I need a converter...
also can I use this vape with smaller amounts of herb? How efficient is this vape?

as my favorite vape is the grasshopper what are the maIn differnces especially according cloud size, amount of used herb and taste and degradation of taste.... draw resistence...

what is the main difference between the herborizer ti... (I know with the fp you can dab and vape flowers at the same time) ...which I also consider as a new poteial desktop vape....
Click to expand...

No converter, you just need a 220/240v coil (220v/240v coils are the same AFAIK). You can use the vape with tiny amounts, its crazy efficient. Cloud sizes easily compare or exceed the GH, there is NO draw resistance, you can use as little as you like or you can get half a gram in there very easily. Taste is great, and not like I remember a GH on 5 at all.

Dunno about the herborizer.
 
Last edited:
btka

btka

Well-Known Member
emmdeemo said:
No converter, you just need a 220/240v coil (220v/240v coils are the same AFAIK). You can use the vape with tiny amounts, its crazy efficient. Cloud sizes easily compare or exceed the GH, there is NO draw resistance, you can use as little as you like or you can get half a gram in there very easily. Taste is great, and not like I remember a GH on 5 at all.

Dunno about the herborizer.
Click to expand...

can someone recommend me a 220/240v coilnwhich works good with the flowerpot...

why does not flowerpot sell them...
 
muunch

muunch

hotboxing the cockpit
The only draw resistance when you use the showerhead is your waterpiece. I have the d-cycler and since it chugs like a mf, it's really hard for me to get a low and slow draw. That said, I prefer the wide open huffing, much like my beloved tubo. I get THICK milk in this recycler, no showercap, with just a pinch (literally using a measuring spoon labelled "pinch") of herb in there at 690.

I think I settled on there on 690. Pretty great for both flower and dabs. Maintaining both, while still being able to kill a reasonable amount of either without dragging it out too long.

Still no IR gun but meh. I'll be picking up some new concentrates over the weekend so I may switch back to the SiC dish just to get a taste, but we'll see
 
Last edited:
lazylathe

lazylathe

Almost there...
muunch said:
The only draw resistance when you use the showerhead is your waterpiece. I have the d-cycler and since it chugs like a mf, it's really hard for me to get a low and slow draw. That said, I prefer the wide open huffing, much like my beloved tubo. I get THICK milk in this recycler, no showercap, with just a pinch (literally using a measuring spoon labelled "pinch") of herb in there at 690.

I think I settled on there on 690. Pretty great for both flower and dabs. Maintaining both, while still being able to kill a reasonable amount of either without dragging it out too long.

Still no IR gun but meh. I'll be picking up some new concentrates over the weekend so I may switch back to the SiC dish just to get a taste, but we'll see
Click to expand...

A "pinch" spoon holds about 0,05g of fine ground material. What i use for every OGFP hit!
It's enough to seriously milk the WT! And then add an dab and away we go!
Off to dab some RockStar shatter with some X-God herb!
Goodnight FP world!

Thoughts and prayers for everyone in the hurricanes path!
 
D

DopeyJ

Well-Known Member
I'm curious. I have the Vapecode flat coil enail kit from Amazon. (https://www.amazon.com/dp/B01N69C440/ref=cm_sw_r_cp_apa_KPRSzbBAPESF7)

I believe they use an aviation plug and not XLR.

What would be my best and cheapest route to get the dab+herb vape combo from this product with what I have?

I've already been informed the flat coil needs to be a barrel, which I believe is $35 from Vapecode. Beyond that, I'm very confused and wish I could afford the full $550 kit.

Edit: unfortunately, the aviation plug 20mm barrel coil is unavailable right now, so assuming I can find it elsewhere, otherwise, do I need to purchase a female XLR port and rewire the internals to wiring specs of a cable with a known pinout?

I don't mind DIY
 
Last edited:
DopeyJ,
Justpassedu

Justpassedu

Well-Known Member
DopeyJ said:
I'm curious. I have the Vapecode flat coil enail kit from Amazon. (https://www.amazon.com/dp/B01N69C440/ref=cm_sw_r_cp_apa_KPRSzbBAPESF7)

I believe they use an aviation plug and not XLR.

What would be my best and cheapest route to get the dab+herb vape combo from this product with what I have?

I've already been informed the flat coil needs to be a barrel, which I believe is $35 from Vapecode. Beyond that, I'm very confused and wish I could afford the full $550 kit.
Click to expand...
Your best bet would be to purchase everything in one shot from NewVape , Since you have a Vaapecode Enail already , you could buy one of NewVapes Barrel coils as the Enails they sell are Vapecode also and the coil will fit. You are correct in that they are not the typical xlr plugs . So i'd say go on Newvapes site , choose a 20mm barrel coil and your FlowerPot parts you want , You'd want these items :
If you want the Showerhead :
https://www.newvape.com/showerhead-combo-20mm-2
https://www.newvape.com/showerhead-carb-cap
Choose your bowl size that fits your glass , example : https://www.newvape.com/flowerpot-male-body-with-handle
https://www.newvape.com/20mm-enail-coil-9109
https://www.newvape.com/flowerpot-kickstand

Those parts would be your cheapest option if you wanted the Showerhead , A handle is recommended but optional .

If you don't want the Shower head and would like to use a Quartz or Sic Dish , you would replace the 1st two links i posted with this :
https://www.newvape.com/flowerpot-sic-combo-20mm-1
https://www.newvape.com/lollicap-carb-cap
and add the coil cover to help retain heat , highly recommend : https://www.newvape.com/coil-cover


Now keep in mind there are different bowls you can choose , its a personal preference and there are some great accessories that will make the experience better but are optional , i linked you to the cheapest option to get you going but please take a look through the page - https://www.newvape.com/vape-essentials/flowerpot-twax-vaporizer , you will see many options and extras , any questions , just ask , we are all here to help . Please also take a read through this as it may answer some questions - https://www.newvape.com/vape-essentials/flowerpot-twax-vaporizer/flowerpot-faq
 
ChooChooCharlie

ChooChooCharlie

Well-Known Member
Pretty damn impressive, NewVape !!
Box arrived within a week, including Labor Day -- with an approaching hurricane.

6DgTBSnl.jpg


Huge box, Mighty there for scale.
Everything I need to begin vaping new.
 
PoopMachine

PoopMachine

Well-Known Member
ChooChooCharlie said:
Pretty damn impressive, NewVape !!
Box arrived within a week, including Labor Day -- with an approaching hurricane.

6DgTBSnl.jpg


Huge box, Mighty there for scale.
Everything I need to begin vaping new.
Click to expand...

Good stuff... looks like about what I have currently. I also have an OG Flowerpot Im going to re-gift.

Waiting on my wrap around Dnail SIC head with female body.. maybe tomorrow if they can actually get mail out of Florida.

One suggestion, and Im sure this is done to try to dissipate heat, the handles for the bases really need to be a little more robust. Mine broke like 2 days after getting it going just trying to get it off a slightly dirty dropdown. Thankfully its the same thread as their dabbers so I used one of the little squat dabbers that comes with the Lollicap. A solid piece of metal might be more better for those. Wrapped in hemp rope, they should do okay to keep the heat at bay. Even the unwrapped dabber Im using doesnt really get hot whilst vaping.
 
lazylathe

lazylathe

Almost there...
@ChooChooCharlie

Welcome to the New Vape FlowerPot Club!!!
Best get ready to sell that Plenty of yours...LOL!

Excellent choice on your new vape!!
I have the OG version and love it!

EDIT:
I decided to change things up tonight!
Went back to my old, fine stainless flat screen instead of the EQ basket.
More airflow with the screen vs the EQ basket.
Also changed up to 1/4 full bowls!! Crazy for me i know!!
WOW!!! this gets me way more medicated!! Using cheap weed and had 4 bowls and feeling good!
It takes a few hits to finish the bowl but they are all super tasty and strong!
Best effects from this cheap herb i bought for a rainy day with the FP! Temp at 685.
Coughing like a mofo though... Hoping the major improvement in minimun draw restriction helps as noted by lots of you lucky bastards :love: owning this setup already! LOL!

If the Showerhead and Showercap combo is better...Oh Boy i cannot wait to buy this one!!!
:science::rip:
 
Last edited:
S

shaolinmilk

Well-Known Member
Is this vape comparable to the Sublimator? I have tried the Sublimator and I think it's a beast however just a little too big and flimsy. I'm wondering, would this vape add decent value to my collection? I like having the best of the best and wondering if there's a spot for this unit in my rotation.
 
Justpassedu

Justpassedu

Well-Known Member
shaolinmilk said:
Is this vape comparable to the Sublimator? I have tried the Sublimator and I think it's a beast however just a little too big and flimsy. I'm wondering, would this vape add decent value to my collection? I like having the best of the best and wondering if there's a spot for this unit in my rotation.
Click to expand...
Imo and I have only hit a Sub once , I used to want one so badly , finally almost ordered and than I found the Fp and I am so happy I did . The Fp takes all the things the Sub got wrong and improves upon them greatly . larger dabbing surface , quicker heat up time , no big flimsy parts , cleaning is so simple , no stuck together titanium like what happens with the sub sometimes , no annoying monkey controller , you can use any enail and so much more advantages. I feel it would fit right In your rotation and most likely make you sell that Sub and everything else you have and put a end to even having to rotate .
 
ChooChooCharlie

ChooChooCharlie

Well-Known Member
gU84Xn8.jpg


Results of first trial ... very dark.
At 600F, but was too slow and long and drunk on third draw I guess.
Punishment cometh with the dawn.

Fear not, wall timer in place.

I enjoy the session time compression!
Soon will enjoy the flower/concentrate session material compression.
Clever folks, this NewVape bunch, using compression to expand our experience.

Really hope they and their equipment make it through the storm OK.
 
Cannabis-Hardware-Ed

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
@ChooChooCharlie thanks for the kind words.
Here's a couple of suggestions to consider while dialing in your Showerhead technique.
That first load seems a little dark for my liking,
1) only add the head/coil when ready to draw. otherwise the flower gets to hot.
2) a slow draw produces hotter air. I suggest medium to high draw strength.
3) allow 60 sec extra after the controller reaches temp. This allows the heat to soak thru the head.
4) start with small loads then work up from there.

I have my controller set to 635. I prefer not to use the carb cap for flower.

Hope this helps.

Welcome to the club

 
You must log in or register to reply here.
Top Bottom