1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

710 coils

Discussion in 'Vapor Related Equipment' started by 710Coils, Jun 18, 2018.

  1. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    @anycolouryoulike My offer for a refund still stands. Just shoot me a message and I can get you set with a refund. Easy Peasy =)
     
  2. anycolouryoulike

    anycolouryoulike Active Member

    Messages:
    40
    Thank you, I might take you up on that. So is THIS the right coil for the Shower Head?
     
    gunmetalshark and 710Coils like this.
  3. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    @anycolouryoulike Yup. Thats the one. The oversized 20mm coils work perfectly on the 20mm ligers without needing to be spread. But I had not tested them with a showerhead to confirm if they would work with it. Shoot me a message if you decide you want a refund and I will take care of sending you some scratch back =)
     
  4. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    Oh snap!!!!!!

    Bangers and inserts land tomorrow!!!! Coils land Thursday!!!!!!

    All pre orders should ship by Thursday.

    Shirts are being worked on and will be after Xmas. But will be worth getting as I am making sure they POP

    Regular and ninja logos and some hoodies!!!!!

    Hope everyone is having a great start to the week

    Shane
     
  5. MrThC

    MrThC Well-Known Member

    Messages:
    15
    Can I pre order?
     
    710Coils likes this.
  6. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    @MrThC shoot me a direct message and I can get you setup with a pre order =)
     
    gunmetalshark likes this.
  7. pxl_jockey

    pxl_jockey Barely-Known Member

    Messages:
    949
    Location:
    Lost in the English countryside
    Coils Thursday is the new Taco Tuesday! Fingers crossed these VRod coils are the ones! They gotta be! :ugh:
    Popping Ninjas and Hoodies to chase away those post-holiday blues! Hell yeah! :rockon:
     
  8. biohacker

    biohacker 710 Minimalist

    Messages:
    7,039
    Huge shout out (again) to Shane for going above and beyond anyone else in this (or any) industry! :rockon:

    He sorted out a small oversight with my original order and more than made up for it! I now have the pleasure of owning a mood mat and :love::bowdown::rockon: At first I didn't really even seriously consider the need for one, but now I can't imagine being without, and think I need another!

    Also finally had the pleasure of using the opaque bottom insert in my 30mm opaque and after a one minute torching with my blazer big shot, drop it in with those awesome tweezers...and I think I may just have had the best dab experience of my life! Again! Thanks Shane! :D

    Anyone else torching and using inserts? Curious what times you're using and which inserts. There is definitely something about the uptemp and then downtemp..... I can actually hold the dab in as long as I want it's so smooth.... compared to just a static temp dab. The uptemp can be replicated on the enail, but the downtemp not so much due to the time it takes, unless you can dump the coil quickly.

    Anyways, I haven't been this medicated in I can't even remember how long! 710Coils made it happen! :rockon:

    I think I feel some IAS coming on... :D
     
    gunmetalshark, SilentJ, Hogni and 2 others like this.
  9. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    Oh boy, soo much stuff in today

    25mm slit clear and opaque inserts
    30mm slit clear inserts
    dab pencils (This was my testing the waters and these are not the quality I would prefer)
    25mm 90 degree 14mm opaque bangers
    30mm 90 degree 14mm opaque bangers
    30mm 90 degree 14mm clear bangers
    25mm 45 degree 14mm opaque bangers
    30mm 45 degree 14mm opaque bangers


    Coils are due this week and more bangers and inserts are due next week. Still working on shirts and hoodies and am hoping to have a date for when they might be here soon

    Will report more and have updated the pics on my shop to reflect the new bangers and they sexiness =P

    Your loyal coil and quartz monger

    Shane
     
  10. srama21

    srama21 Monotonous Botanist

    Messages:
    406
    Location:
    New York
    Oh man, shirts and hoodies? I cannot wait to rep 710coils with a hoodie
     
  11. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    I know I have been promising to set up bundles and I am going to get this finished finally (Scouts honor). I just wanted to wait for a solid dab tool to be able to add to the bundles.

    So I decided to just order some sweet dab pencils from Tommy Tubez He is also working on making me a paddle version. Just a pencil with a flat shovel end instead of the eraser style. I think these would be more functional and still look damn sexy!!! They are due to be in my shop by next week and will be around 30.00 and will be a perfect accessory for your baller ass 710 axial coil and banger =)

    I am in the process of moving to new digs and wanted to make sure you all knew incase I am slow to respond in the next few weeks. Nothing more than me playing pack mule =P

    Cannot wait to show off the dab tools and other wondrous sundries coming to the 710 coil corner store

    Your loyal coil and quartz monger

    Shane
     
  12. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    3,553
    Location:
    Berlin, Germany
    Great news! Tommy T. really makes beautiful dabber pens. I didn't know his work up to now. Thanks!
    Nice colors and combinations. Do you already have any samples to look at?
     
    StormyPinkness and biohacker like this.
  13. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    @Hogni I got 20 coming and he has not told me anything other than they gonna be sexy!!! =P

    I did mention I loved the retti work he had done on some of his pencils and am hoping for a fw in my order

    Will post pics once they land
     
  14. StormyPinkness

    StormyPinkness Rhymenocerous ʕ•ᴥ•ʔ

    Messages:
    2,032
    Location:
    California
    I used a thermocouple to measure the temp and unfortunately when I'm running the glass symphony around 750f the outside is around 280f. I would of enjoyed using it to color change the octopus logo.

    Thanks for the info!
     
    710Coils likes this.
  15. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
    Guess what?????

    COILS LANDED TODAY!!!!!!!

    Will be working on getting all orders filled and shipped out today. Also the Vrod coils came in and they are perfect so I can happily start selling them finally =)

    Hit me up with any questions and I will be checking my phone through out the day

    Your loyal coil and quartz monger

    Shane
     
    Pyr0, CastIronHits, anasrzi and 4 others like this.
  16. biohacker

    biohacker 710 Minimalist

    Messages:
    7,039
    Anyone use an RDK-300 (or 200) with their 710coils axial and banger? Just curious on heat up time, as well as temp swing/stability.
     
    Last edited: Dec 6, 2018
  17. superdang9000

    superdang9000 Well-Known Member

    Messages:
    126
    Location:
    Oregon
    That's what I'm using, although my banger is a 30mm from dhgate. Heats up and stabilizes in about 2.5 min, temp swing is maybe 3-4 degrees and only really occurs during the dab.
     
  18. biohacker

    biohacker 710 Minimalist

    Messages:
    7,039
    Does it have an auto-tune feature like the omron?
     
    710Coils likes this.
  19. 710Coils

    710Coils Manufacturer

    Messages:
    386
    Location:
    Washington
  20. biohacker

    biohacker 710 Minimalist

    Messages:
    7,039
    Thanks Shane, it looks like it does however auto-tune does not seem to be one of them.
     
    710Coils likes this.
  21. Baron23

    Baron23 Well-Known Member

    Messages:
    4,080
    Lot of people including me and there ain't a dang thing wrong with an Auber...doesn't matter the coil or the banger as long as pin outs are compatible...but I do run my 710coil QB and coil off of a RDK-300.
     
    StormyPinkness and 710Coils like this.
  22. MinnBobber

    MinnBobber Well-Known Member

    Messages:
    4,151
    ...................................................................
    ?? Are you heating the banger with coil setup AND then heating an insert externally via torch ---and dropping it into the banger.... then dab?

    Sorry, never heard of this b4
    Thanks
     
    710Coils likes this.
  23. nosmoking

    nosmoking Fogmonger

    Messages:
    1,430
    Location:
    DC Area
    I am pretty sure he is just torching for this particular reference. I don't believe he is using the axial coil or any coil for this reference.

    @biohacker I run a 25mm opaque bottom with (1) 6mm quartz pearl and (1) 8mm quartz pearl on my RDK-200. The RDK-200 does not boast many features, and it does not have autotune, however with shakes axial coil I have the RDK-200 set to 497F. My surface temp inside the dish with a k type thermocouple reads about 470F so its not too far off considering the coil should run a little hotter than the dish. I am not sure an autotune feature is necessary with the quartz banger and axial coil. I did find a much larger delta between the coil temp and dish surface temp when I used a sic halo and super flat coil with my RDK-200.
     
    710Coils, Easywider and biohacker like this.
  24. biohacker

    biohacker 710 Minimalist

    Messages:
    7,039
    @nosmoking thanks, and what is your heatup time from cold to stability, and do you get much of a temp drop when taking your hit?

    Interesting how you went with one quartz pearl of each size, instead of 3 of one size like Shane suggests. I'll have to try that!
     
    710Coils likes this.
  25. pxl_jockey

    pxl_jockey Barely-Known Member

    Messages:
    949
    Location:
    Lost in the English countryside
    Oh happy day! Lots of wishing & hoping has come to fruition! I’m the proud future owner of a GENUINE, AUTHENTIC 710 Coils VRod Special!!! I’m really glad because this coil has required so much time, effort and expense to bring to market that anyone else less passionate about coils (and giving the people what they want) would have given up. It couldn’t have been worth the headaches but he persevered, like he does.

    Even though NV now offers a solution with the D-Nail pin-out and I just bought the VRod setup from them, and NV was great to me, I had my heart deadset on having a bit of 710Coils magic in my setup. I’m not in the rosin-squishing game yet, due to stash restrictions :\, and concentrates aren’t readily available in the UK at this time, so I tend to feel on the outside looking in. Especially looking in on 710Coils’ IG FFS; little pots of golden crystals and goo everywhere, it makes me green with envy! :D I’m hopeful the VRod coil will get me in with all the cool kids, rocking and praising their 710Coils everywhere I go.

    And the minute I am able to provide for myself, I’ll be bugging Shane for the killer banger/axial, MoodMats, bubble caps, pencil dabbers, clip-kit, and whatever else he’s managed to cram into his “bundle package bonanza” by that time. It’ll be ridiculous, like an obscenely overstuffed gift basket. A dabbers hamper.

    I’ll be like, “Oh Shane, you’ve got such a big package, it’s so wonderful!”. :luv:
    And he’ll be like, “Yeah. That’s what everyone says. You’re not clever.” :|
     
    Pyr0, Hogni and 710Coils like this.

Support FC, visit our trusted friends and sponsors