The Magic-Flight Box

Purpl3_Haz3

Purpl3_Haz3

On a Permanent Vakation
chronvape said:
Hey guys im new to the board and I just received my mflb yesterday! The thing is amazing and ive got the technique down :) One question tho, my kit came with a charger that just has the mflb logo on it and no other info about it. When i go to charge a battery it has a light above each battery slot and starts off red then changes to blue rather quickly. Does the blue light mean its fully charged?
Click to expand...

not sure, as I have a different charger, but my friend has the one you speak of...I know red and or blue is charging, and the other is finished, and yellow i believe means an issue...are the batts used? try vaping with one, then put it in, id guess the color youd see would be charging, then it should change to the opposite when done...


sorry if thats confusing, oor obvious info you know, pretty vaked at the moment. :o
 
Purpl3_Haz3,
The_Algebraist

The_Algebraist

Well-Known Member
So just completed a little session with the LB and the freshly broken in Powerex 2700s from the C9000.

I'd like to charge the just-used battery. When prompted to enter the charge rate, should I enter 1350 mA in order to charge the battery at 0.5 C?
 
The_Algebraist,
F

flyfysher

Member
1. I received my Maha charger and Powerex 2700 batteries a few days ago. They seem to be a little hotter than the stock Tenergy batteries which I received with my LB. Definitely a worthwhile investment.

2. Can anyone point me to the post number where Pyromon's technique is fully explained? I just dropped by here today so I haven't been following at all for awhile.

Thanks.
 
flyfysher,
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
The_Algebraist said:
I'd like to charge the just-used battery. When prompted to enter the charge rate, should I enter 1350 mA in order to charge the battery at 0.5 C?
Click to expand...

You can't, it uses increments of 100. For any battery intended for the LB there's no reason not to just use the default of 1000.

flyfysher said:
Can anyone point me to the post number where Pyromon's technique is fully explained? I just dropped by here today so I haven't been following at all for awhile.
Click to expand...

http://www.vaporpedia.com/wiki/Magi...F_Does_it_really_deliver_thick_cloudy_hits.3F
 
pakalolo,
willieR

willieR

Been here since 2009
I have to say that the increased power of the P2700s really upped my game. My organic material tends to be on the moister side so the added juice gets me down to business faster and requiyou can inhale faster / easier. Quite a difference. I have 4 silver bullets in the charger. I just grab a fresh one each time.

Now I love my MFLB even more.
 
willieR,
W

wake n blake

A Weed Nerd
dammit, pakalolo... I'm trying to save money... My finger is hovering over the 'check out' button... well, not now, I'm typing here now, but it was... my mind is hovering over the 'check out' button ha.

such a good price...


ok, I ordered it... so when that comes, I'll have 12 powerexes, a 15 minute charger (with a cigarette lighter adapter) and the fancy pants charger so I can exercise all these batteries.

I guess if I ever lose power or go on a road trip I'm good to go haha.

thanks for posting that pakololo


mod note: Use the edit button please. Posts merged.
 
wake n blake,
DeepFried

DeepFried

A Legend in my Own Mind
The_Algebraist said:
So just completed a little session with the LB and the freshly broken in Powerex 2700s from the C9000.

I'd like to charge the just-used battery. When prompted to enter the charge rate, should I enter 1350 mA in order to charge the battery at 0.5 C?
Click to expand...

Close, you can only choose in 100mA increments so either 1300 or 1400, I choose 1300 because it requires one less button push LOL
 
DeepFried,
slvelocity

slvelocity

Well-Known Member
Can anyone comment on the energizer batteries that come with the charger? Are they better than the stock ones at least?
 
slvelocity,
W

wake n blake

A Weed Nerd
slvelocity said:
Can anyone comment on the energizer batteries that come with the charger? Are they better than the stock ones at least?
Click to expand...

they're all right... about the same as stock.
 
wake n blake,
sydnee

sydnee

Vaporus Majorus
This may be a stupid question, but I just got some Powerex 2700s and there is a small, black paper circle on top of each battery. Do I take that off after I peal it? :/

Thanks in advance!
 
sydnee,
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
sydnee said:
This may be a stupid question, but I just got some Powerex 2700s and there is a small, black paper circle on top of each battery. Do I take that off after I peal it? :/

Thanks in advance!
Click to expand...

It's not a stupid question. You can leave those on, although there's no problem if you take them off (or they fall off). They've fallen off all mine.
 
pakalolo,
B.

B.

War Criminal
i'm really happy with the immedion 2400s. They might be slightly less powerfull than my 2700s, but they still work really really well.

I did a refresh/analyze with my fancy new powerex c9000(i didn't have the patience for a break in cycle). that thing is huge.

they finished at

2435
2410
2374
2333

Even the 2333 gives great hits. not pa status or anything, but satisfying.
 
B.,
JDSupreme

JDSupreme

Head of Pot
wow c9000 just got here. NOW THATS WHAT I CALL A FUCKING CHARGER damn i cant wait to get refreshing!!
 
JDSupreme,
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
B. said:
i'm really happy with the immedion 2400s. They might be slightly less powerfull than my 2700s, but they still work really really well.

I did a refresh/analyze with my fancy new powerex c9000(i didn't have the patience for a break in cycle). that thing is huge.

they finished at

2435
2410
2374
2333

Even the 2333 gives great hits. not pa status or anything, but satisfying.
Click to expand...

I'm not aware of a reason why the 2333 should deliver any less punch than the 2435. The number represents capacity not power. What I don't know is whether the chemistry difference between the LSD Immedion and the HSD Powerex results in a difference in power. Based on comments here and my own observations, I suspect it does.

Re the C-9000: One nice feature is that you can program each slot separately. I often have one slot doing a break-in or a refresh.
 
pakalolo,
B

bruce48

Active Member
I got my MFLB this week and it came with a charger, the v-818 charger:
http://bit.ly/fhmo11

I finished charging a brand new Powerex 2700 and it was really super hot, just a tad shy of scorching my hand.

I am all new to this so my question: is this normal for a battery to get so hot?
It was on the charger for maybe a little over and hour.
thanks
 
bruce48,
C

Calibudz

Member
I hope i'm not the only germaphobe here...

I'm sharing my MFLB with a few friends and i would like to know the best way you guys would recommend to sanitize the box for cleanly hits without worrying about damaging it

Thanks
 
Calibudz,
Gunky

Gunky

Well-Known Member
Maybe get several tubes like the plastic ones Magic Flight supplies (I think they still supply them, don't they?). Clean em after guests leave?
 
Gunky,
B

BuddahMonk

Well-Known Member
Calibudz said:
I hope i'm not the only germaphobe here...

I'm sharing my MFLB with a few friends and i would like to know the best way you guys would recommend to sanitize the box for cleanly hits without worrying about damaging it

Thanks
Click to expand...

Iso prep pads? 100 for about $2.00. I use these for quick disinfecting and cleaning of some vape parts. Drys pretty fast. Any opinion on this.
 
BuddahMonk,
FLskwat

FLskwat

VAPOLITICS!
BuddahMonk said:
Calibudz said:
I hope i'm not the only germaphobe here...

I'm sharing my MFLB with a few friends and i would like to know the best way you guys would recommend to sanitize the box for cleanly hits without worrying about damaging it

Thanks
Click to expand...

Iso prep pads? 100 for about $2.00. I use these for quick disinfecting and cleaning of some vape parts. Drys pretty fast. Any opinion on this.
Click to expand...

Drinkable high grade alcohol as Everclear is even safer, but ISO is ok. The provided brush is perfect (just dip it in alcohol). And you can accelerate evaporation by inserting the batt & pushing it 15 to 20 sec with the lid open, trench empty: the ISO will instantly evaporate 100% ;) !
 
FLskwat,
weedemon

weedemon

enthusiast
Ok, i kept on hearing about these over on reddit under tree comics and after googling it (along with finding this awesome forum) I had to have one!

I own a volcano classic and have been happily using it for over a year now.

i ordered mine from http://www.vaporizers.ca/ (is this allowed?) it was $102 Cdn. the reason i wanted a cdn site was to avoid importing duty/a heavy tax added on when i get it at my door. (i made this mistake with my volcano and ended up paying 120 extra!!!

they shipped it to my billing address, NOT the shipping address i provided, but luckily i was back home visiting my parents/friends when it arrived! (my mom is nosy and will open everything i get)

as for the unit itself: I love it! the taste is actually better than my volcano. I was really surprised by this. I am getting mighty ripped off it too i must say. It is also more quiet/discreet i can slip away for 30s and none are the wiser :p

I also ordered a set of those batts/charger from the .ca version of the site. after tax/shipping it was 80cdn

I look forward to a great new friendship between the mflb and i. :D

so yeah, great work magic flight, when those PA's go retail i will buy one too!
 
weedemon,
FLskwat

FLskwat

VAPOLITICS!
Question: my acrylic? stem is already quite amber color because of the vape "honey" inside.
Can I dump the stem in a cup of hot milk & honey, harvest the vapor condensation through the heat & fat of the milk with no risk for the stem plastic material? (I'm pretty sure I can but just wanted confirmation?)
 
FLskwat,
Lo

Lo

Combustion free since '09
I haven't tried that FLsk. I'd be careful heating the acrylic for sure. If your mixture isn't too hot I'd be 1/2 tempted to see if the goodies dissolve.

My latest method of recouping from my LB stem:
I use a stainless steel skewer and to collect the honey from inside the tube, then I put the stainless skewer into Everclear to dissolve & recover the goodies.
 
Lo,
You must log in or register to reply here.
Top Bottom