WaxOnWaxOff
Well-Known Member
I have no idea but I also want to know. I want to buy that the second it becomes available.
I'll buy the prototype if VapeXhale will sell it to me!!
Discontinued VapeXhale Cloud EVO
- Thread starter stonemonkey55
- Start date
I have no idea but I also want to know. I want to buy that the second it becomes available.
I'll buy the prototype if VapeXhale will sell it to me!!
Bob Loblaw
Astralnaut
↑
I need to have this now!!!!
http://statigr.am/p/641699647371685158_324436354
that's mesmerizing!
when will those be for sale?
made by gordo scientific, contact @PhotoRider if you are interested in a bulk buy
I need to have this now!!!!
http://statigr.am/p/641699647371685158_324436354
that's mesmerizing!
when will those be for sale?
made by gordo scientific, contact @PhotoRider if you are interested in a bulk buy
Sinclue
OK disagree with me, I can't force you to be right
That was one of the pieces SM showed me (allowed me to try out). Seriously lung power required, but afterwards you're unable to accurately describe what the hell that thing was that just knocked you on your ass. Did anybody get the license of that truck? 
5dogswalking
Well-Known Member
So I tried this on mine- but have to crank back up to 3 to get thick white vapor. Keep feeling like mine is running cold. ???Try 1/2 full, makes a big difference IMO
I actually do what SM (I think) suggested: turn to 3 o'clock, then when green turn to 12 o'clock, the time to cool to 12 helps heat the mass. Then when green on 12 I turn to 1:30 or 2:00 because I like the vapor denisty vs flavor right around there
SD_haze
Well-Known Member
Well I actually read SM saying crank it to max temperature until green then turn down to desired temp (which is often 3 for me!)
oldiebutgoodie
Apostle, Church of Vaporization
The red & green led's flash together when the unit times out.
Re heat up, when the unit first turns green, the sensor is indicating that the heater has reached your setting, and if sufficiently high enough will to begin delivering light vapor. As "thermal mass" increases in the unit, so does extraction/vapor. Try turning the unit on at 3, when the light goes green, adjust the dial to desired position, light will go red, when green again you should get vapor although waiting another ~5-10 minutes works best IME.
If thick white vapor is what you want, usually 2-3 is where the unit needs to be set. On my units at 3 I can milk the largest pieces I have, like the Fanatic Swagger. But I know I'm wasting vapor, I prefer about 1:30 for a good blend of flavor and density. The unit heats so quickly once at that point that I sometimes increase it to 2 for a couple of hits then increase it to 3 to finish it off.
About the top end heat and concentrates - according to SM, with their attachment the EVO will be able to vape concentrates. For that matter, people have already done it, just been in a klugey sort of way.
I have a 1400 for my ticker. I bought an extra pick-and-pluck for it, so I'll probably just make a new one for my Evo. Should be much better as the cord on the OG Cloud was always the hardest thing to deal with in the case.
It's a good size (the 1400) for the Evo and I would recommend it.
WaxOnWaxOff
Well-Known Member
Gordo made a few but I believe this one is Swagger.
kimura
Well-Known Member
I have currently evolved into using an entirely different approach than I did with the Cloud+. This is made possible by the fact that once the EVO is heatsoaked, it seems to be very responsive to increases in temperature. so I can turn up the dial in the middle of a session, wait a minute or two after it turns green, and by the time I am naturally ready to take another hit, it's ready.
Instead of just going straight to the high-temp clouds like I used to, I'm usually doing something like this with every ~1/3 ELB:
1st hit: vape off the most delicate goodies at like 10:30-11:00 using the straight dry mouthpiece
2nd-3rd hit: crank the temp to ~1:00, wait a couple mins and rip it through whatever HT or bubbler I feel like using
last hit: crank to 3:00-3:30 wait a couple mins and finish it off using the best diffusion available
If pre-heated, I can complete my ritual in ~5-7 minutes. I think this is allowing me to squeeze more content out of my herb, while providing the most delicious flavor I have ever experienced in that first hit. I can't overstate the flavor of that first cool hit with the straight dry tube. I think it's obvious enough that I am thrilled with the EVO.
one of my favorite little improvements over my Cloud+ is the fact that none of my ELBs have gotten snagged in the joints of any glass I have mated the EVO with, ever, regardless of the experience level of the user. this was occasionally an issue with my Cloud+ on some glass joints and it is completely eliminated by the thicker/stubbier joint of the EVO
Instead of just going straight to the high-temp clouds like I used to, I'm usually doing something like this with every ~1/3 ELB:
1st hit: vape off the most delicate goodies at like 10:30-11:00 using the straight dry mouthpiece
2nd-3rd hit: crank the temp to ~1:00, wait a couple mins and rip it through whatever HT or bubbler I feel like using
last hit: crank to 3:00-3:30 wait a couple mins and finish it off using the best diffusion available
If pre-heated, I can complete my ritual in ~5-7 minutes. I think this is allowing me to squeeze more content out of my herb, while providing the most delicious flavor I have ever experienced in that first hit. I can't overstate the flavor of that first cool hit with the straight dry tube. I think it's obvious enough that I am thrilled with the EVO.
one of my favorite little improvements over my Cloud+ is the fact that none of my ELBs have gotten snagged in the joints of any glass I have mated the EVO with, ever, regardless of the experience level of the user. this was occasionally an issue with my Cloud+ on some glass joints and it is completely eliminated by the thicker/stubbier joint of the EVO
t-dub
Vapor Sloth
Yeah man . . . EVO has made flavor surfing the dial a real sport for me . . .
ataxian
PALE BLUE DOT
Rub it in!Yeah man . . . EVO has made flavor surfing the dial a real sport for me . . .
Rub it in!
Even I own a EVO!
It only took me TWO SESSIONS total tonight to get me medicated beyond expectations.
Decided I should call it a night instead of packing #3.
That's why it's worth it!
I am going to replace my broken HT with a new one however I really really want a nice bubbler to run it inverted with!
I have a 1400 for my ticker. I bought an extra pick-and-pluck for it, so I'll probably just make a new one for my Evo. Should be much better as the cord on the OG Cloud was always the hardest thing to deal with in the case.
It's a good size (the 1400) for the Evo and I would recommend it.
Was coming in here to ask about HT transport/storarge options after my recent loss of a Vaporblunt HT i liked a lot.
Going to get a Swagger Showercap very soon from a FC member but I guess I have to start saving for the recycler HT too....
Think I could fit a evo AND a swagger showercap in a 1400/1500?
I would be totally open to going something cheaper than Pelican if it fits and does the job...
Last edited:
oldiebutgoodie
Apostle, Church of Vaporization
I have a 1400 for my ticker. I bought an extra pick-and-pluck for it, so I'll probably just make a new one for my Evo. Should be much better as the cord on the OG Cloud was always the hardest thing to deal with in the case.
It's a good size (the 1400) for the Evo and I would recommend it.
I have a Nanuk 930. Also highly recommended.
For a low-cost alternative, take a look at the Plano 1404 Gun Case, here:
http://www.amazon.com/Plano-Protector-Four-Pistol-Case/dp/B000P3WPKK
Last edited:
Enchantre
Oil Painter
So, this morning I had EVO heated up to a comfortable Noon, and I literally grabbed a pinch of herb, put it in the ELB - barely enough to cover the bottom, if it were level - hit it FOUR times at Noon, then once at 3 - LOTS of vapor, I'm seriously medicated, and the ABV was caramel-colored, even, and probably could have gone another round.
I'm quite impressed.
I'm quite impressed.
newVaper420
Vapor Enthusiast
Yeah I'm not sure what kind of shipping you have, but mine was "Direct Signature" so the Fed-Ex guy came, asked for my address, and my NAME! LOL. Then I had to sign for it.
turk
turk
....that exact same one....sometimes they have asked, sometimes not....not taking any chances...already had it delayed because of weather...so I'm staying in ....lol..
Dr. Plutonious
Well-Known Member
I've been exploring the EVO's lower ranges a bit more. It was hard at first since honestly, watching glass pieces fill with instant thick-milk never gets old. But the lower range on the EVO hasn't got enough attention. I've been going for thinner vapour, which the EVO has done very well. Consistent, smooth, and tasty.
WaxOnWaxOff
Well-Known Member
What dial settings are you using?
Dr. Plutonious
Well-Known Member
I've been doing about 12.
I let it heat to 12 for about 7 or 8 minutes. It provides a fair bit of vape still, just not very opaque. You can crank it up accordingly as the weed gets more and more vaped.
The nice thing about the lower temp is the hits are more manageable. It's a more efficient temp setting.
When I want to get stoneddddddd I usually do the slow and steady, through the different temps, just because I find it more effective. I usually top off though with a couple big cloud bowls.
I let it heat to 12 for about 7 or 8 minutes. It provides a fair bit of vape still, just not very opaque. You can crank it up accordingly as the weed gets more and more vaped.
The nice thing about the lower temp is the hits are more manageable. It's a more efficient temp setting.
When I want to get stoneddddddd I usually do the slow and steady, through the different temps, just because I find it more effective. I usually top off though with a couple big cloud bowls.
SD_haze
Well-Known Member
For the low ranges,
I'm getting some visible vapor if l I preheat long enough at around 10:30
WaxOnWaxOff
Well-Known Member
I will have to do more testing. It seems even after a preheat that I need to be closer to 1PM to produce visible vapor.
Another thing i've been noticing so far is that the Evo seems to work best for me with slower draw speeds where my Cloud+ seems to work best for me at faster draw speeds.
gvape
Well-Known Member
Thats weird, I never had a Cloud+, but the faster I pull with my my evo, the thicker the hit is. When I have a friend who is hitting it the first time they can barely get any visible vapor. I tell them to hit it as hard as they can and then they get a thicker hit.