Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Squiby
Well-Known Member
I watched the live broadcast yesterday just because I enjoy George's videos and I've watched them all. 
I had no plan or intention of purchasing a Dynacoil because I've been happy using my concentrates with a cut down concentrate pad. Well, never say never!!! George sold me on the Dynacoil!!! I ended up buying a coil/tip combo, 'cause who doesn't need another tip hanging around?
Now I'm excited to try it out!! Can't wait for it to arrive and it hasn't even been shipped yet!
EDIT: Scratch that....it has SHIPPED!!!!
George is a master wizard and salesman. I love the passion and his geekiness resonates with me! I always enjoy learning about the science behind the Dynaverse.
I had no plan or intention of purchasing a Dynacoil because I've been happy using my concentrates with a cut down concentrate pad. Well, never say never!!! George sold me on the Dynacoil!!! I ended up buying a coil/tip combo, 'cause who doesn't need another tip hanging around?
Now I'm excited to try it out!! Can't wait for it to arrive and it hasn't even been shipped yet!
EDIT: Scratch that....it has SHIPPED!!!!
George is a master wizard and salesman. I love the passion and his geekiness resonates with me! I always enjoy learning about the science behind the Dynaverse.
Last edited:
nickdanger
Collector of Functional Art
Well, I restarted my computer and it is ok now. Gremlins...
ataxian
PALE BLUE DOT
Are you living in the CANARIES?
I surfed in SPAIN in the 90’s!
ROSIN is $20usa ?
SHATTER was $100.00 not too long ago?
Last edited:
Furnias
Active Member
Hola!
Mmm, no, i'm not see concentrates or rosin yet... But i wish... Think we need to search in some cannabis private club, or make us.
I have on the basket one coil, one Ti tip, one cap and one condenser... But i have fear of the customs... Did you have problems with this?
I think over 150€ not have import cost, but yes we need to pay IVA 21%... Same amount as the sale...
Last edited:
Finally pulled the trigger with the 20% discount rather than continuing to wait for the chance of 40% on 4/20. Quick question for you guys, if you'd be so kind:
I ordered an Omni XL. It hasn't shipped yet and I've found myself wondering: should I add spare screens and/or o-rings to my order?
I've tried searching online to find how often people have had to replace screens but was able to find only a single forum post on FC which stated that the person replaced one in two years and only because they lost the original. Barring my also losing one, if these things otherwise last indefinitely are spares worth the $11?
As for the o-rings, I know the ones used in Omnis don't need to be removed for Iso cleanings and they look like they'd be a massive pain to get on and off. Furthermore, between the tip and condenser there seem to be seven o-rings in an Omni but the High-Temp O-Ring kit they sell on the site only includes five. It seems real shitty to sell them in sets too small for even a single full replacement. How often, if every, have people had to replace any/all of their o-rings?
Thanks!
I ordered an Omni XL. It hasn't shipped yet and I've found myself wondering: should I add spare screens and/or o-rings to my order?
I've tried searching online to find how often people have had to replace screens but was able to find only a single forum post on FC which stated that the person replaced one in two years and only because they lost the original. Barring my also losing one, if these things otherwise last indefinitely are spares worth the $11?
As for the o-rings, I know the ones used in Omnis don't need to be removed for Iso cleanings and they look like they'd be a massive pain to get on and off. Furthermore, between the tip and condenser there seem to be seven o-rings in an Omni but the High-Temp O-Ring kit they sell on the site only includes five. It seems real shitty to sell them in sets too small for even a single full replacement. How often, if every, have people had to replace any/all of their o-rings?
Thanks!
Last edited:
Really? From the compatibility chart on their site it looks like there are three of them on there, to the left of the mouthpiece.
MinnBobber
Well-Known Member
...............................................................
X2
I visited his shop last year and got a baggie of Ti shavings (the full baggie weighs almost zero).
I've used the Ti shavings BUT also succumbed to the magic of the conc coil and ordered a Ti tip/coil kit and
two conc coils.
In a few weeks, I'll be experimenting with squishing legal CBD buds into rosin and hope that process
will get some nice CBD rosin ???
dampo
Well-Known Member
I have been viewing a few of these "live ' video's for my research, i experienced the same problem sometimes.( although not minutes but seconds out of sync)
So your pc is fine.
Mr Turnip
Well-Known Member
Really? From the compatibility chart on their site it looks like there are three of them on there, to the left of the mouthpiece.
Ah so it does I always thought only hight temp on tips and normal on condensers even omni's I don't have an omni to check tho. Sorry mate my mistake someone a lot more knowledgeable will pop on soon lol.
Squiby
Well-Known Member
I like to have spare spares screens and o-rings around just in case. I broke an o-ring once and didn't replace it for a good long while. You can be short an o-ring now and again and your Omni will perform just fine.
I've had my Vapcaps for over three years now and I've replaced 2 o-rings and about three screens. Both the o-rings were user error. I broke one and the other I lost. The screens were lost when I tried to pop them out of The tip. The VapCap is a lifetime device. There is very little that can go wrong.
To remove the screen without it flying into outter space, either place your finger over the top open end of the tip before applying pressure through the neck or just place your tip upside down on a towel and push the screen down and out. Lift up the tip and there the screen will sit.
Its highly unlikely that you would evert need to replace all the o-rings at once.
But it is nice to have a VapCap repair kit on hand. Have a look at the links below in my signature. There you will see my recommendations to build a full arsenal of bits to keep your VapCap going into the next century. Also, there is a link at the bottom for buying o-rings in greater quantities.
Last edited:
Perfect, thanks for the detailed answer! Good to hear the parts are all fairly durable, if easily lost. You've convinced me; I added them to my order.
seki
Well-Known Member
@Squiby, would you happen to know of any places that have other coloured o and x rings? I took a look at your links a while back and could only find red (and I think brown) o-rings and black x-rings. I wasn't after any colour in particular other than maybe a black o-ring for my shadow m, I was just hoping to snag a variety.
I've been doing some searching, but haven't had any luck.
Just waiting on my shipping email 
cybrguy
Putin is a War Criminal
Funny. I have put a Coil Kit in my cart, deleted it, put it back, deleted it, etc several times now, but I just can't pull the trigger. I know I will get one of these some time, but I really need access to concentrates first, ya know? Hate to waste the deal, but I'm gonna have to let logic prevail on this one.
Sorry to the folks managing the website for my silly cart behavior with no consummation. You can blame George's hold on me for my inability to just watch from afar...
Sorry to the folks managing the website for my silly cart behavior with no consummation. You can blame George's hold on me for my inability to just watch from afar...
KidFated.
Unknown Member
A few testers have posted about their experiences with the coils. Our good friend @antispleen even provided an awesome video!
Also the o rings went from black to grey because the grey ones hold up to iso much better than the black ones.
What concentrates would be best for this coil? I’m a noob to them besides hash and keif
ataxian
PALE BLUE DOT
Rosin: use what is best for you?
CAPS function with a magnet ?
I like GDP for sleep!
PINEAPPLE EXPRESS for reading!
Get what you like!
GSC is My personally favorite, however some find it weak?
Last edited:
horst
horsed
Arg, now I remember why I avoided this thread for so long...
Was doing like this:
1. intention is to buy coil and tip.
2. put the kit in the cart
3. nice, a discount, maybe I should browse a bit!
3. hmm, second coil as a spare is always useful, added
4. always wanted a spinning titanium tip, cmon, make that shipping costs worthwile, added
5. Vong stem... hmm, got a vong body already but these new shaped vongs look gorgeous, added
6. ouch, that has summed up, lets rearrange.
7. if I build that ti tip vong xl s I'll save a buck and get a spare cap for free
8. Build that and kicked everything out, adding two coils
idea was to spend 50$ for tip and coil, ended up with the amount trippled...
conclusion: that damn cheap marketing got me again, AS ALWAYS WITH NEW DYNATOYS.
Now iI officially reached the turning point, spend about 500$ total in the dynaverse to date, more then I ever invested in a single vape manufacturer. For the most simple, most affordable vape on the market. actually. if you can tame that VAS. I can't...
I need to stay out of here or I will be broke real soon.
Was doing like this:
1. intention is to buy coil and tip.
2. put the kit in the cart
3. nice, a discount, maybe I should browse a bit!
3. hmm, second coil as a spare is always useful, added
4. always wanted a spinning titanium tip, cmon, make that shipping costs worthwile, added
5. Vong stem... hmm, got a vong body already but these new shaped vongs look gorgeous, added
6. ouch, that has summed up, lets rearrange.
7. if I build that ti tip vong xl s I'll save a buck and get a spare cap for free
8. Build that and kicked everything out, adding two coils
idea was to spend 50$ for tip and coil, ended up with the amount trippled...
conclusion: that damn cheap marketing got me again, AS ALWAYS WITH NEW DYNATOYS.
Now iI officially reached the turning point, spend about 500$ total in the dynaverse to date, more then I ever invested in a single vape manufacturer. For the most simple, most affordable vape on the market. actually. if you can tame that VAS. I can't...
I need to stay out of here or I will be broke real soon.
janusportal
Well-Known Member
So now that the coil's out of the way, when's the induction heater making its debut?
ataxian
PALE BLUE DOT
Nice question?So now that the coil's out of the way, when's the induction heater making its debut?