Discontinued Supreme Vaporizer
- Thread starter nysuperscum
- Start date
-
- Tags
- flame powered
psyshaman
Vapor Viking
There isn't even store near me that sells decent glass. Head shops in Australia have a pretty limited range of things, often many I wouldn't even consider inhaling through ever again!
That said I am in regional area of Aus three hours from the nearest capital city.
All of my purchases are done onlline and generally picked up at my local post office
A more extensive review of the supreme will follow after I have some more time experiment!
That said I am in regional area of Aus three hours from the nearest capital city.
All of my purchases are done onlline and generally picked up at my local post office
A more extensive review of the supreme will follow after I have some more time experiment!
scientist22
Vapor bong addict
So mine is stuck in limbo along with a bunch of other packages that where due today/tomorrow because of the Canada post strike...What horrible timing...if Ed had only sent it out withing a couple of days of my order being placed I would have been good ![:\](/i/s/hmm.gif "Hmm :\")
scientist22
Vapor bong addict
I'll post up a video review using those two pieces whenever i end up receiving my sv...
Nycdeisel
Well-Known Member
Thanks.
I was a little to eager to use this after a fresh pickup, and I want to put emphasis on the fact that I did not prepare the herb for this the way I usually do. The material I used was very moist, and I only cut it up, didnt grind it. still good results, obviously more testing needs to be done
Everything that was included:
I thought the mini torch it came with was cute, but I probably wont use it.
next to my old iphone3G
and the grand finale, the first couple of hits that I took, plus showing the cap.
^click to watch ^
further reviewing will be conducted after extensive trials. enjoy and feel free to comment.
I also have more to upload but that will have to wait.
I was a little to eager to use this after a fresh pickup, and I want to put emphasis on the fact that I did not prepare the herb for this the way I usually do. The material I used was very moist, and I only cut it up, didnt grind it. still good results, obviously more testing needs to be done
Everything that was included:
I thought the mini torch it came with was cute, but I probably wont use it.
next to my old iphone3G
and the grand finale, the first couple of hits that I took, plus showing the cap.
^click to watch ^
further reviewing will be conducted after extensive trials. enjoy and feel free to comment.
I also have more to upload but that will have to wait.
scientist22
Vapor bong addict
Wow i didn't think they looked that nice, the wood used looks amazing i hope the one sent to me is as nice!
theasian
Official Asian
Thank you NYC! Device looks awesome! Thanks for the pics as well!!
Looking forward to your more through testing although the initial results are still very impressive (despite the herb situation).
Can you take a pic of the size comparison between your butane torch and the device? Just curious the size difference (or similarity).
Looking forward to your more through testing although the initial results are still very impressive (despite the herb situation).
Can you take a pic of the size comparison between your butane torch and the device? Just curious the size difference (or similarity).
notmyrealUSERname
Notmy Well-Known Member
Nycdeisel: thanks for the vid! great job - you showed the temps, and some nice glass, and good clouds! i could hear you "tasting" it, 
.
you can seriously reduce the heating time by simply using your big torch on one side, and the little torch thats included with the sv2, on the other side!
i got to try my friends sv2. i will say it works exactly like my old version, it can be devastating! i think the new design works better with 18mm pieces - don't need a glass reducer. smaller size isn't an issue, although i can hold the torch and the sv1 in one hand while its heating, whereas, the sv2 is too small for me to 'one hand' it.
i need to try it a few more times before i will pass judgement on the new screen setup.
.you can seriously reduce the heating time by simply using your big torch on one side, and the little torch thats included with the sv2, on the other side!
i got to try my friends sv2. i will say it works exactly like my old version, it can be devastating! i think the new design works better with 18mm pieces - don't need a glass reducer. smaller size isn't an issue, although i can hold the torch and the sv1 in one hand while its heating, whereas, the sv2 is too small for me to 'one hand' it.
i need to try it a few more times before i will pass judgement on the new screen setup.
SD_haze
Well-Known Member
notmyrealUSERname said:Nycdeisel: thanks for the vid! great job - you showed the temps, and some nice glass, and good clouds! i could hear you "tasting" it,
you can seriously reduce the heating time by simply using your big torch on one side, and the little torch thats included with the sv2, on the other side!
i got to try my friends sv2. i will say it works exactly like my old version, it can be devastating! i think the new design works better with 18mm pieces - don't need a glass reducer. smaller size isn't an issue, although i can hold the torch and the sv1 in one hand while its heating, whereas, the sv2 is too small for me to 'one hand' it.
i need to try it a few more times before i will pass judgement on the new screen setup.
The new design works better with 18mm but it still works fine with 14mm right?
psyshaman
Vapor Viking
I haven't tried mine in an 18mm joint yet, only 14mm. It works perfectly with the orange cone adapter or I have attached it with ease to my EHLE just using the mouthpiece tubing..
That torch looks great Nycdeisel I cheaped out and got a smaller one from ebay, after only 6 or so loads of the supreme I ordered the bernzomatic you have.
From your video it looks like it heats a lot faster than my current ebay torch
That torch looks great Nycdeisel I cheaped out and got a smaller one from ebay, after only 6 or so loads of the supreme I ordered the bernzomatic you have.
From your video it looks like it heats a lot faster than my current ebay torch
theasian
Official Asian
SD_haze said:notmyrealUSERname said:Nycdeisel: thanks for the vid! great job - you showed the temps, and some nice glass, and good clouds! i could hear you "tasting" it,
you can seriously reduce the heating time by simply using your big torch on one side, and the little torch thats included with the sv2, on the other side!
i got to try my friends sv2. i will say it works exactly like my old version, it can be devastating! i think the new design works better with 18mm pieces - don't need a glass reducer. smaller size isn't an issue, although i can hold the torch and the sv1 in one hand while its heating, whereas, the sv2 is too small for me to 'one hand' it.
i need to try it a few more times before i will pass judgement on the new screen setup.
The new design works better with 18mm but it still works fine with 14mm right?
The 18mm vs 14mm is a great question. Let us know NYC!
Nycdeisel
Well-Known Member
It seems to work easier with 14mm, but I just took the downstem out of my tube to make an 18mm opening and it fits nice and snug but not as easy to just lift it off of the glass since it goes down a bit far.
So, yes, the seal is also good for 18mm joints, its just a tighter fit.
Good afternoon everyone, I am going to see if I can get another video up for you all.
So, yes, the seal is also good for 18mm joints, its just a tighter fit.
Good afternoon everyone, I am going to see if I can get another video up for you all.
