The Tempest by Mad Heaters & Phatpiggie

RedZep

Well-Known Member
To your last message, i usually have to vape outside aswell but sometimes get the sneaky one in the bathroom at the window with the fan on😅, ive had all bowls in the bathroom so far, but i just had one outside and can tell the differance with it cooling down. I still had plenty of time to finish the bowl though
You should experiment with IH times when using outside in winter. As device will have a lower unheated temp.

I would suggest finding your IH time sweet spot indoors, then look where your visual indicator is at. Then you have that reference point when using outdoors.
 

Brenyo

Well-Known Member
Manufacturer
If im running the wand at 400c to the blinks stop, should i be hearing a click? @Brenyo
Yes about 8 seconds early, unless I forgot to put it in or has one which is too concave so it doesn’t work.

Try to shake it if you can hear the metal disc moving around
 
Brenyo,

Brenyo

Well-Known Member
Manufacturer
I feel like i can only hear the balls shake
It does sound like it so hard to say :D
You could try to tighten the ball screen a bit more. Try to keep the screen flat, don’t overtighten it until the sides are starting to take a concave shape.
If you can still hear it rattling then it’s the click disc

Either way, it’s fairly loud so you should def hear it if it was working.
 
Brenyo,

VapChap09

Well-Known Member
It does sound like it so hard to say :D
You could try to tighten the ball screen a bit more. Try to keep the screen flat, don’t overtighten it until the sides are starting to take a concave shape.
If you can still hear it rattling then it’s the click disc

Either way, it’s fairly loud so you should def hear it if it was working.
Should i maybe run a empty bowl at full degrees on the wand and just listen?
 
VapChap09,

Fox

Well-Known Member
An E-nail heating coil in the right diameter should also work or what do you think?
 
Fox,

Brenyo

Well-Known Member
Manufacturer
An E-nail heating coil in the right diameter should also work or what do you think?
Yeah it should, however I don’t think that there is such a small coil unless you DIY it.
 
Brenyo,

Fox

Well-Known Member
What is the diameter of the oven, was it 13mm?
A stainless steel sleeve that fits into a 20mm E-nail coil with an exact hole for the Tempest. I always have ideas, I don't know if something like that would be suitable for everyday use...
 
Fox,

Brenyo

Well-Known Member
Manufacturer
What is the diameter of the oven, was it 13mm?
12mm

A stainless steel sleeve that fits into a 20mm E-nail coil with an exact hole for the Tempest. I always have ideas, I don't know if something like that would be suitable for everyday use...
I think it’s just way easier and cheaper to get a wand instead. :D It would take a long time to heat up unless it’s always on.
 

Fox

Well-Known Member
12mm


I think it’s just way easier and cheaper to get a wand instead. :D It would take a long time to heat up unless it’s always on.
Yes, the wand is much more practical, of course! Can you say something about whether the Tempest will be available at Verdampftnochmal in Germany?I assume that it will, the guys are always up to date with what they have to offer.
 

Seinen

Active Member
He said on page 12 that both verdampftnochmal and lacentralevapeur will have the Tempest in stock ;)
 

stuwyatt

New Member
Are there going to be any glassware adaptors available at the time of launch? I'm ideally wanting to use the tip with my small mini globe bong+cage+whip when out in the wheelchair. I have the space to carry it all and enjoy the spectacle of using it in public. I often use a dynavap setup in the same way.
 
Last edited:

RedeyeDezign

Well-Known Member
Accessory Maker
Are there going to be any glassware adaptors available at the time of launch? I'm ideally wanting to use the tip with my small mini globe bong+cage+whip when out in the wheelchair. I have the space to carry it all and enjoy the spectacle of using it in public. I often use a dynavap setup in the same way.
The Tempest head is the same diameter connection as dynavaps so if you already have a dyna adapter, the Tempest head should work with it. I've used it with the bonger for instance.
Edit: I believe there is a 14mm to 10mm unground glass attachment on madheaters website so it doesn't scratch the mouthpiece.
 
Last edited:
RedeyeDezign,
  • Like
Reactions: mcscruffy

VapingYogi

Pranayama; of a sort.
Yeah it should, however I don’t think that there is such a small coil unless you DIY it.
There is it’s the 16mm Screwball EZ nail heater that’s about 10 wraps deep, it’s probably over kill and might still be too big. It’s only an early adopters kit anyway but it’s the closest I saw recently to a small coiled heater. Just for interest sake.

The Tempest head is the same diameter connection as dynavaps so if you already have a dyna adapter, the Tempest head should work with it. I've used it with the bonger for instance.
So people with stem collections *looks around innocently* will have things to play with and compare. That's always fun, but, I think that there is going to be few stems that can compare natively, but having all those WPA's already you can use it fun.
 
Last edited:
VapingYogi,
  • Like
Reactions: Fox
Top Bottom