Boundless Tera

[LesPlenty]

Just give it a good wash and leave in direct sunlight for a day to finish curing all the plastic/silicon/rubber to help with the smell.
I would also swap the bottom oven disc filter with a normal fine screen (Mighty/Crafty screen works well) as it falls out every time you dump out a load.
Lastly, I would remove the WPA filter and retainer and screw on a Top Hat (12/16mm) in its place for better airflow and fewer scooby snacks in your bong.

Edit; 15 should have said 16mm

 

[BigJr48]

Top Hat (12/15mm)

Where's it available???

 

[LesPlenty]

Where's it available???

https://www.ebay.com.au/itm/10pcs-T...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

I used the above, you just have to squeeze around the lip a bit more to make them fit really tight,
a Vapexhale ELB also works but is very tight (and expensive)

 

[Petunia Vanish]

Anyone have photos of their tera Setups (with or without glass)

The Tera isn’t bad..I don’t really ever do burn offs..imo it can do more harm than good but that’s another thread another day...I got mine yesterday and have ran 1 dry bowl and got good vapor at 365..and then did the wpa at 390 then bumped up to 400..nice clouds but not super thick..very big hits but not that thick milk..just reporting my findings..but the main point is it tasted decent and got me high..I really like the way the battery door has the magnets which I know others reported a rattle but I still like the magnets on this vape. Easy removal of mp and just overall easy to change mp and so forth. And the vape just feels good in the hand. I can’t wait to get my square back and try them head to head..

Ever get your square back?

 

[LesPlenty]

Anyone have photos of their tera Setups (with or without glass)

Not a photo...better;
https://420vapezone.com/mighty-vs-boundless-tera/

 

[Petunia Vanish]

I'm on three fence tera or cf...does the Tera have better air flow (draw resistance?)

 

[SpudBob]

Yes better air flow for sure!

 

[Petunia Vanish]

Yes better air flow for sure!

Best temp for quick extraction

 

[SpudBob]

I like 390ish. Best of both worlds! Good vapor and flavor! Maybe a bit higher through H20!

 

[Petunia Vanish]

I like 390ish. Best of both worlds! Good vapor and flavor! Maybe a bit higher through H20!

Awesome man thank you how many rips at 390

Does this unit have pass thru can I use it while it is charging

 

[BigJr48]

I start @ 375 gradually finishing @ 390

 

[SpudBob]

Awesome man thank you how many rips at 390

Does this unit have pass thru can I use it while it is charging

It depends on how much you load. I have one of Ed's MP, it was my design in the first place, and load just the stem most times. I get 5-6 nice draws off about .05grams. The main bowl will take up to .5g's I think.I never load it to the top when I use the main bowl either. Pass thru, I can't remember, but think it does. I have a mess of 18650's and use an external charger so its not really a problem for me anyway

 

[Petunia Vanish]

It depends on how much you load. I have one of Ed's MP, it was my design in the first place, and load just the stem most times. I get 5-6 nice draws off about .05grams. The main bowl will take up to .5g's I think.I never load it to the top when I use the main bowl either. Pass thru, I can't remember, but think it does. I have a mess of 18650's and use an external charger so its not really a problem for me anyway

The long version?

How do you load the Woden mp is there a screen in there?

 

[HughJundys]

I call this configuration

 

[Petunia Vanish]

I call this configuration

looks like my vapexhale mouthpiece... how many hits @ what temp r u using?

 

[BigJr48]

@HughJundys where did you find such a unique mouthpiece for the Tera???

 

[HughJundys]

@HughJundys where did you find such a unique mouthpiece for the Tera???

It is the black mouthpiece from my SB Maxx with Tera WPA. Combine the three and you get the Shaft.


https://www.sneakypetestore.com/col...rick-og-black-mouthpiece?variant=581820383238

 

[LesPlenty]

Or if you would rather play a skin flute instead of a Tuba;

https://www.dhgate.com/product/crea...-18mm/410840131.html#s1-4-1b;searl|0756164065

 

[Petunia Vanish]

I've read the solo stems work but i never liked those.

 

[HughJundys]

I've read the solo stems work but i never liked those.

I was using the bent solo stem at first. It does work. What I use the most is a J hook.

 

[Petunia Vanish]

I was using the bent solo stem at first. It does work. What I use the most is a J hook.

Got a photo?https://www.google.com/url?sa=t&sou...BMAB6BAgHEAM&usg=AOvVaw0cZFZLMpzeBTPxaGWmS-Qm
I plan on using

 

[SpudBob]

The long version?

How do you load the Woden mp is there a screen in there?

yes the mp has a screen and a recessed area to load

 

[Petunia Vanish]

yes the mp has a screen and a recessed area to load

How is extraction with that mp.

Do you run unit hotter since there is a gap of hot air in the heater

 

[SpudBob]

How is extraction with that mp.

Do you run unit hotter since there is a gap of hot air in the heater

No need to increase heat. This unit extracts very well !

 

[BigJr48]

I used the above

WOW!!! This thing rips!!!