cybrguy

Putin is a War Criminal
There is only one cure for VAS. Poverty. And it works as long as you don't allow easy credit to bring you down...

FYI, I think I would prefer VAS as long as it didn't lead to poverty.

(Hobby, yeah, funny, I've been using that one. See above...)
 

London Vaper

Well-Known Member
I am so on the edge of getting a vapexhale, literally rrady to pull the trigger any moment now... Resisted temptation for few months now but more i read about it the weaker i get...

Does anyone here have 1? Bowl for bowl with exact same amount will i get bigger clouds with the evo? Consistent avb and get wrecked?

If i get 1 it will be with Calyx to use dry? Any opinions on this?
 
London Vaper,

Ramahs

Fucking Combustion (mostly) Since February 2017
I'm pretty much a failure at avoiding the syndrome.

I'd say that you're a success at acquiring the syndrome. The syndrome nourishes us all.

I probably have too many vapes

I'm not sure that I understand the concept, "too many vapes".
Is this even realistically possible? I guess maybe, if you had too small of a home to fit them all in, and could not afford to move to someplace larger. But then again, storage facility rentals are within most people's budget...if one were to run out of room at home.
 

Frenchy

Well-Known Member
I know that a while back Dynavap was selling some sandblasted models for a short period. Do you think they would custom make an Omni with either a steel or titanium body? Do they still do custom models at all? Sorry if this is a dumb question, I am just trying to look at all my options before I finally give in to the VAS.
 

Dynalowrider

Well-Known Member
I want to brag on DDave's Water Wand. I found a Pyrex No. 9825 test tube, that a Water Wand fits into. Has a screw cap. After using a WW it collects a lot of reclaim. I put in the WW and cover it with Everclear, let it soak off the reclaim. A beautiful golden brown ethanol and reclaim mix.
I said all that to say this. I'm having an operation on my bad eye to repair my lower eyelid. because of shrinkage of the eyeball the eyelid wants to turn inside out. I have to make sure my lungs are clear so I'm on a T-break. I have a habit of vaping just before bed. Which puts me to sleep. So I have taken a shot of Jack Daniel's with a few drops of reclaim works better. I'm here to tell you, this stuff puts me out all night. Doc

I've been a JD fan since it was "Old No. 6".
 

almost there

Well-Known Member
I know that a while back Dynavap was selling some sandblasted models for a short period. Do you think they would custom make an Omni with either a steel or titanium body? Do they still do custom models at all? Sorry if this is a dumb question, I am just trying to look at all my options before I finally give in to the VAS.

I think you are better off contacting @stardustsailor or @mrb if you are looking for a sandblasted custom of any kind. Dynavap may possibly do it but more like likely if they do any customs it'll be planned for a limited run which will take preparation and time.
 

pxl_jockey

Just a dude
I know that a while back Dynavap was selling some sandblasted models for a short period. Do you think they would custom make an Omni with either a steel or titanium body? Do they still do custom models at all? Sorry if this is a dumb question, I am just trying to look at all my options before I finally give in to the VAS.
Why not contact DV direct and ask them? They may very well have a few lying around that aren’t listed. Most companies I wouldn’t bother with this question if it wasn’t in their shop but DV is different. I’d ask. If they don’t, then I would most definitely holler at @mrb because sandblasting is his jam. SDS does metal lathe work but I don’t recall him doing any sandblasted stems. Btw, welcome here and FC in general!
 

Joeguito

Active Member
Hi all, since our beloved device makes it so damn easy to get inspired I'd like to share a new VapCap design I made with the help of an Omni Woody XLS and some conductive substances. It features an anodized piston that can be used with the mouthpiece to dial in one of five color indicated air flow levels. There are three models, PCA (piston controlled air flow, depicted), PCA XL and PCA XLS. The whole design is completely V.A.S. compliant.

DV_VC_PCA.jpg


Let me know what you think. :peace:

Long live Dynavap
 

Frenchy

Well-Known Member
That's amazing. I honestly prefer that to the current, angular Omni design. Having colors would also make it easier to adjust back to a level of airflow that you liked in the past.
 

Dynalowrider

Well-Known Member
Why not just look in the mouth-piece to tell how open or closed the condenser is in the Omni. As the mp is screwed in or out, the condenser shows in the mp opening. As the mp is screwed off the condenser, (if the mp is kept in the body or stem), it pushes the condenser into the tip. You don't need no colors or pistons. Don't want to reinvent the wheel. Just saying. Don't mean harm to peoples ideas. Trying to keep the cost down. Doc

Guess I shouldn't have said anything, it's just I don't think it was noticed that it showed in the mp how open or closed the Omni was.
 
Last edited:

abcd5432

Well-Known Member
There is only one cure for VAS. Poverty. And it works as long as you don't allow easy credit to bring you down...

FYI, I think I would prefer VAS as long as it didn't lead to poverty.

(Hobby, yeah, funny, I've been using that one. See above...)

It's my hobby. I used to buy pc parts. I still do for my server, but my gaming spending is more towards vapes now. It's actually cheaper and more satisfying. It's my favorite hobby learning about the tech and seeing where it advances etc.

I'd say many of us consider this a hobby on here hence why we enjoy talking to each other. I generally don't have much of anything in common with most users. They don't care. They will burn their joint or blunt and not remotely care to learn or discuss anything about Marijuana. Here, we really get into everything. Vapes, grinders, heating methods, glassware, knockoff glass etc.

I'd say yes some people are smokers/vapers. But here a lot more people take it as a hobby and really enjoy it.

I'd parallel it to my music experience. Lots of people like to listen to music. Very few people e joy getting into the nitty gritty of getting great performing speakers, learning how the industry is extremely overpriced/underperformance, and getting into the diy rabbit hole of building amazing speaker designs that outpace anything you can buy retail for even 5x the price.
If I talk to anyone outside of avsforum about music in that manner it's not enjoyable for them.

If you're on here, I'd say this is more to you than just something you do, it's something you're truly probably passionate about and care far more intimately about than 95% of the population.

/end long post
 

Ramahs

Fucking Combustion (mostly) Since February 2017
It's my hobby. I used to buy pc parts. I still do for my server, but my gaming spending is more towards vapes now. It's actually cheaper and more satisfying. It's my favorite hobby learning about the tech and seeing where it advances etc.

I'd say many of us consider this a hobby on here hence why we enjoy talking to each other. I generally don't have much of anything in common with most users. They don't care. They will burn their joint or blunt and not remotely care to learn or discuss anything about Marijuana. Here, we really get into everything. Vapes, grinders, heating methods, glassware, knockoff glass etc.

I'd say yes some people are smokers/vapers. But here a lot more people take it as a hobby and really enjoy it.

I'd parallel it to my music experience. Lots of people like to listen to music. Very few people e joy getting into the nitty gritty of getting great performing speakers, learning how the industry is extremely overpriced/underperformance, and getting into the diy rabbit hole of building amazing speaker designs that outpace anything you can buy retail for even 5x the price.
If I talk to anyone outside of avsforum about music in that manner it's not enjoyable for them.

If you're on here, I'd say this is more to you than just something you do, it's something you're truly probably passionate about and care far more intimately about than 95% of the population.

/end long post

I couldn't agree more! :clap:
 

paehtod

Well-Known Member
:brow:Gethigh with marijuana is the only goal in my life at this moment, I mean I really LOVE it.:love::peace:
Found this forum and discuss with other people having the same forbidden hobby is awesome, because I can not even talk about it with others in normal life of my location. And Dynavap enhanced this experience like 100x times.:rockon: Made my life healthier and rediscovering how to get high is really fun!:brow:

Here is my 1yo cocobolo XLS VonG
5kowna.jpg
 

cybrguy

Putin is a War Criminal
I'd say many of us consider this a hobby on here hence why we enjoy talking to each other. I generally don't have much of anything in common with most users. They don't care. They will burn their joint or blunt and not remotely care to learn or discuss anything about Marijuana. Here, we really get into everything. Vapes, grinders, heating methods, glassware, knockoff glass etc.
I'd say yes some people are smokers/vapers. But here a lot more people take it as a hobby and really enjoy it.
And I am certainly one of them. I laughed because while calling this a hobby helps me rationalize the money I have spent on it, vaping and it's associated accoutrements are much more a hobby than combusting ever was. I am sure in the 4+ years I have been vaping I have purchased more kit than I did the previous 40+ years and I am good with that because I find it fun and entertaining. For the most part, other than some silly contraptions in school and with friends, combusting cannabis was pretty much all about getting high. Now it is definitely more like a process and a challenge and (dare I say) a movement. Vaping is harder than just twisting up a fattie and applying a match. The process is fun in itself.
So, no disagreement at all. Comity instead. :)
That Nonavong with the screamer on it has always been my favorite. Natures artwork...
 

Marlon Rando

Well-Known Member
The process is fun in itself.
I concur so long as it doesn't interfere with my $$ budgeting. It's no coincidence cash is called "liquid" easy come easy go.

@stark1 Oxy Clean baby! hahaha love those dudes. actually a great product to clean bongs with.

If you're on here, I'd say this is more to you than just something you do, it's something you're truly probably passionate about and care far more intimately about than 95% of the population.

Well Said:tup:
 

SaturnIII

Well-Known Member
Hi guys, new vapcap M owner, my second vape and my first Dynavap. Got a little issue...

I was already baked from my Solo2 and I decided what a great time to try this vapcap out! Well everything was going grand. It worked like a champ and I though, yeah I’m sufficiently high but that was so fun I gotta light it again! Oh hell no, I like a dumbass did the thing they warn you about, thought it had cool down clicked but obviously it had not because shortly after torching smoke started rolling out and I was like FUUUUUUCCCCKKKK!!!!!!! Talk about the stench of 100 roaches!!!

Well I watched the dynavap videos and I got it all cleaned up but here’s the issue.... I heard him say don’t soak the cap, just swab it out. Well I swabbed the hell out of the cap inside and out with 91% iso alcohol and q-tips. It’s clean looking but it still stinks like a roach. Any thoughts?
 

beyond6strings

Just another traveller in the Cannaverse
Hi guys, new vapcap M owner, my second vape and my first Dynavap. Got a little issue...

I was already baked from my Solo2 and I decided what a great time to try this vapcap out! Well everything was going grand. It worked like a champ and I though, yeah I’m sufficiently high but that was so fun I gotta light it again! Oh hell no, I like a dumbass did the thing they warn you about, thought it had cool down clicked but obviously it had not because shortly after torching smoke started rolling out and I was like FUUUUUUCCCCKKKK!!!!!!! Talk about the stench of 100 roaches!!!

Well I watched the dynavap videos and I got it all cleaned up but here’s the issue.... I heard him say don’t soak the cap, just swab it out. Well I swabbed the hell out of the cap inside and out with 91% iso alcohol and q-tips. It’s clean looking but it still stinks like a roach. Any thoughts?

Give toothpaste a shot.
 

CVC4455

Well-Known Member
Hi guys, new vapcap M owner, my second vape and my first Dynavap. Got a little issue...

I was already baked from my Solo2 and I decided what a great time to try this vapcap out! Well everything was going grand. It worked like a champ and I though, yeah I’m sufficiently high but that was so fun I gotta light it again! Oh hell no, I like a dumbass did the thing they warn you about, thought it had cool down clicked but obviously it had not because shortly after torching smoke started rolling out and I was like FUUUUUUCCCCKKKK!!!!!!! Talk about the stench of 100 roaches!!!

Well I watched the dynavap videos and I got it all cleaned up but here’s the issue.... I heard him say don’t soak the cap, just swab it out. Well I swabbed the hell out of the cap inside and out with 91% iso alcohol and q-tips. It’s clean looking but it still stinks like a roach. Any thoughts?


I just soaked my cap in 190 proof Everclear 2 days ago when I cleaned my M. Didn't know you aren't supposed to do this but luckily my cap still seems to be working perfectly! The cap was in there for at least 10 minutes maybe longer?
 
CVC4455,
  • Like
Reactions: stark1
Top Bottom