Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
beyond6strings
Just another traveller in the Cannaverse
This link to Dynavap's compatibility chart might help. https://www.dynavap.com/faq
Regarding lighter and carburetor technique. I've stopped using the single flame torch and have been using the 3 flame Vertigos I got from DV and Amazon. They give the most consistent roasting and I've not combusted or even come close since I moved away from the single flame torch. I also seem to get 4 decent sized draws instead of 3-with only one producing great results when I used the single flame.
I've also turned my Omni MP full clockwise giving me the most air flow and allows me to really play the carb. I always start a draw with the carb covered for a few seconds and then feather it til I'm done. Huge tasty clouds. I love that doing it this way allows mouth pulls-the hardest thing for me with vaporizing flower is the long slow lung pulls of hot dry air-that wears me out and it's why my Milaana is now only for use with a bong at night.
I am just over the moon with the DV.
NizzyJones
Well-Known Member
Yeah, they're on everything except the omnis.
Dynavaper
Karma Farmer
I just bought this beautiful Phatt Piggie stem at the https://thehedonistclub.co.uk/collections/dynavap-parts/products/phatt-piggie-100mm-vapcap-stem flash sale. I am so happy! 
Dynalowrider
Well-Known Member
Having trouble placing the rings where you want them? Find a soda straw that goes in the stem or body and over the condenser. Push rings where you want them landed. Build from tip to mouthpiece to get it together. Lube rings with spit or sebum. Doc
All of the condenser used at your devices have two different x-rings.
The M's condenser has one #8 (8 mm Outer Diameter ) and one #7 (7 mm OD ) .
The woody XLS has 1x #8 & 2x #7.
Put some saliva at your finger tip and cover the circumferance of the X-rings ,that go inside the stem
With a twisting motion insert the condenser slowly at the stem .
When the #8 x ring of the Ms reach the lip of the stem ,push them
gently inside the stem with your thumb.For the XL woody just push gently the mp.
Cheers.
Made myself a Ti-'M' stem today... sandblasted obviously
I like it. It's very light..
Don't worry @stardustsailor im not your new competition
I like it. It's very light..Don't worry @stardustsailor im not your new competition
Last edited by a moderator:
Made myself a Ti-'M' stem today... sandblasted obviously
Don't worry @stardustsailor im not your new competition
Very good job !
P.S : Competition is a good thing .
It's the main fuel of evolution .
Actually ,I need a skilled-in-the-art competitor.
Maybe you should think it over again.
I do not do sand-blasting,for example .
The mp you 've made is very good !
And if you take over all the stems with a carb hole ,
that would be great -...for both of us !
Last edited:
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
DynaVap Live first edition! Originally broadcasted live on Facebook December 13, 2017
StringTheorista
Well-Known Member
Spent part of my day making a slip case for my vertigo dual flame torch.
(First attempt at posting a pic, not sure I've got it)
Edited to try adding pic. Imgur is annoying af!
Modnote: Edited to display image
Last edited by a moderator:
wileycoyote1103
Well-Known Member
stark1
Lonesome Planet
Howdy, fellow VapCapers!
While mucking around with my VapCap toys I may have stumbled across something interesting.
In the picture below, on the right is what we have seen as a fourth gen VapCap tip, seven-fin right oriented spiral, with wide grooves.
What does the tip on the left look like to you?
A version with narrow, shallow grooves, similar to the third
generation, with the spiral now right oriented, as in the 4th Gen.
So, it seems there may be two versions of the 4th generation, or two versions of the 3rd.
A TRANSITIONAL TIP. THE T-TIP!
—Because of the right spiral, to me it is an early 4th Gen.
4A, early version; 4B the revised 4A, with wider, and possibly deeper grooves.
Please tell me I am hallucinating (so much acid). Haha
Generation 4 tips come in two versions!?
While mucking around with my VapCap toys I may have stumbled across something interesting.
In the picture below, on the right is what we have seen as a fourth gen VapCap tip, seven-fin right oriented spiral, with wide grooves.
What does the tip on the left look like to you?
A version with narrow, shallow grooves, similar to the third
generation, with the spiral now right oriented, as in the 4th Gen.
So, it seems there may be two versions of the 4th generation, or two versions of the 3rd.
A TRANSITIONAL TIP. THE T-TIP!
—Because of the right spiral, to me it is an early 4th Gen.
4A, early version; 4B the revised 4A, with wider, and possibly deeper grooves.
Please tell me I am hallucinating (so much acid). Haha
Generation 4 tips come in two versions!?
SloJimFizz
Unknown Member
cybrguy
Putin is a War Criminal
Pretty sure I am gonna get one. Looks like the cheapest combined stash and XL holder. Tho, the leather one is still interesting from Delta.CG, 10% of something small is something small(er).
Go on, you are going to like the newness of it. Hope that tips you to the 1/2 full side, Bud!
Cheapside, no external mag, nicer ones (with magnet), stark contrast tho, on his site.
ambertrichome
Well-Known Member
My Initial thoughts on the M are that it’s harsher than I expected and that the heat up click on my M is VERY faint compared to the cool down click. I,m thinking that part of my harshness issue is due to my lack of dynvap carb skills and the fact that I was lighting the cap a little low as I did semi combust twice early on.
On to the positive stuff once I refined my heating technique a little, I chuckled to myself no wonder there is so many pages on FC forum for the Dynavap.
This little beast of a vape is fantastic with its dense cloud production,simple technique,light golden ABV, the fact that is simple to clean and maintain and it’s practically unbreakable
I’ve found that the inverted lid of my Mendo mulcher works great as a vapstash between caps/bowls with the cap fitting perfectly in the gap between the magnet and cutting teeth. I also tinkered with a small piece of silicon whip tubing turning the M into a sweet little MacGyver vong.
On to the positive stuff once I refined my heating technique a little, I chuckled to myself no wonder there is so many pages on FC forum for the Dynavap.
This little beast of a vape is fantastic with its dense cloud production,simple technique,light golden ABV, the fact that is simple to clean and maintain and it’s practically unbreakableI’ve found that the inverted lid of my Mendo mulcher works great as a vapstash between caps/bowls with the cap fitting perfectly in the gap between the magnet and cutting teeth. I also tinkered with a small piece of silicon whip tubing turning the M into a sweet little MacGyver vong.@ambertrichome the cooling clicks on my M are only slightly louder? But I get 1 quiet click, then one louder click about a second later. Though sometimes i only seem to get 1 click when cooling..
I've already dropped the M a few times. glad it's not an OG.
I've already dropped the M a few times. glad it's not an OG.
Last edited:
ambertrichome
Well-Known Member
I get one faint click on heat up and two solid clunks/clicks on cool down.
ataxian
PALE BLUE DOT
My opinion has no importance.
I like the VAP CAP "M" however it fit's in my rotation.
Tomorrow I will make a water adaptor.
Like a LOTUS for sure.
I did notice the consumption was lower than usual which is a plus for some user's.
First Impression:
FLAVOR = outstanding for my needs
EFFECT = LIKE a JOINT
I need my portables and PLUG-IN'S, however the "M" is now in my rotation.
It doesn't matter what I think anyway!
I feel like a MILLENNIUM STYLE person.
VERY NICE JOB 4 SURE!
WATER WORLD TOMORROW (need to make a H2O adapter. (DIY)
Bob DYLAN said in one of his song's: EVERYBODY must get STONED!
EVERY PICTURE TELLS A STORY! DON'T IT? (ROD STEWART)!
Last edited:
ataxian
PALE BLUE DOT
The "M" is a BLING FREE VAPORIZER - FUNCTION FIRST
BLING 4 young guns!