Dynavap VapCap

[Derrrpp]

Haha, a splendid idea thanks. I've got a spare glasses case and I've just had a play with it. It'll either happily fit my vapcap [in doobtoob], jet lighter and a stash or my mflb, three batteries and a stash.

Thanks mate. This'll keep me going until I have the readies for some proper dynastash chic

Glad I could help!

 

[Dynalowrider]

If you are looking for a smell-proof case, take a look at the Black Rock Originals Safety Case 2.0. So many configurations. Tape sealed zipper, and carbon filter, 30 day Satisfaction Guarantee.
This case is so elegant looking. Plenty of room for VapCaps, my Vector 3/torch, and it comes with a silicone container. Look it up blackrockog. Doc

 

[alterego420]

If you are looking for a smell-proof case, take a look at the Black Rock Originals Safety Case 2.0. So many configurations. Tape sealed zipper, and carbon filter, 30 day Satisfaction Guarantee.
This case is so elegant looking. Plenty of room for VapCaps, my Vector 3/torch, and it comes with a silicone container. Look it up blackrockog. Doc

That is very cool mate. Unfortunately, my budget doesn't stretch that far at the moment.

 

[Katnip]

I am sold. In another thread I posted a novel on how I'm an inexperienced dummy and would likely fuck up a choice of my first on my own vape purchase. I love the affordability and dependability and foolproofness of this one. I'm waiting on an email to confirm what I've heard here about stealthy billing, and if I can confirm the stealthy billing I'm ordering it. Finally..... My head is hungry. One question before I go, @VapCap, the holes. The holes in the body, what do you do with them or do they just help the vapor along? Forgive the noobness..... are they supposed to be blocked until your vapor level is achieved? I don't understand. Sorry!

 

[Winegums]

I am sold. In another thread I posted a novel on how I'm an inexperienced dummy and would likely fuck up a choice of my first on my own vape purchase. I love the affordability and dependability and foolproofness of this one. I'm waiting on an email to confirm what I've heard here about stealthy billing, and if I can confirm the stealthy billing I'm ordering it. Finally..... My head is hungry. One question before I go, @VapCap, the holes. The holes in the body, what do you do with them or do they just help the vapor along? Forgive the noobness..... are they supposed to be blocked until your vapor level is achieved? I don't understand. Sorry!

The Air hole is to allow you to vary the amount of air that is mixed with your vapour. The Vapcap can produce some very thick vapour and diluting it can go a long way as far as reducing harshness. The Omni condenser takes it one step further and lets you adjust the amount of air, eliminating the need to feather the carb.

When I'm making pieces to sell I offer the choice of having a carb hole or not. The main reason for elimating the hole is use with a water piece, where locating the carbhole wastes time and complicates the process. In other cases customers simply do not want a carbhole and prefer undiluted vapour.

 

[mourningbell]

Trimmed one of the spare screens that came with my Incredibowl (yuck) and installed it under the CCD in my M. CCD still clicked in! Haven't tried it out yet but I imagine it'll do some good.

Wish I had some degummed hemp.

 

[kellya86]

Iv been thinking......

Any chance of a Teflon vapcap...???
Would this work....
Mainly the condenser and body....

Would it be more inert than the ss...???

 

[Hogni]

Why should it be more inert than ss?

As body you can take what you want so long it stands at least 60° C without any emissions.

 

[kellya86]

Why should it be more inert than ss?

Iv just been looking into what materials are more inert than others... and it seems Teflon is very inert...
I'm not saying there is anything wrong with the current design at all.. just exploring options...
Maybe I just want a unique vapcap...

I wonder how hot the end of the ss condenser get, when in use...???

 

[Dynalowrider]

Melting point of Teflon is around 630 f, but I think it does a lot of out-gassing at lower temps. I don't think Teflon coated lungs is a very good idea.
You want a fancy one? How about Gold plated?
Gold melts about 1350 f.
Platinum has a m.p. of 3215 f. Now that's a choice for your pocketbook. Doc

 

[kellya86]

I wonder if george @VapCap would produce a limited run of precious metal vapcaps....

I bet they would sell....

 

[Winegums]

Edit: I thought this was talking about the tip not the body my bad!

I wouldn't want to use a teflon Vapcap tbh. I'm okay with a bit of teflon tape around my o-rings but applying flame to teflon tip doesn't sound like a good idea. Teflon will melt.

SiC would be far more interesting and a better choice for a tip.

 

[kellya86]

I wouldn't want to use a teflon Vapcap tbh. I'm okay with a bit of teflon tape around my o-rings but applying flame to teflon tip doesn't sound like a good idea. Teflon will melt.

SiC would be far more interesting and a better choice for a tip.

Doesnt the minivap have a teflon core????

 

[Doktor Dub]

minivap is available with teflon or glass core.

Teflon is said to be safe for vaporizing temperature, but if you use butane, there are much higher temps involved somewhere on your vape.... sic sounds interesting

 

[Hogni]

SiC would be far more interesting and a better choice for a tip.

But who wants a breakable - expansive - body?

 

[Winegums]

Doesnt the minivap have a teflon core????

Edit: I saw that you're talking about the body and not the tip. My mistake. Teflon would be fine as a body material, if anything O-rings would last much longer and it would be easier to clean.

Edit: It might be fun to order some teflon and turn a few bodies/stems.

The max operating temperature of teflon is 500F and the coolest flame that we use to heat our tips is over 3500F. An electronically controlled vape will be able to hold the temps below 500F where our lighters and other flame sources cannot do so accurately and safely. Combusting in a Teflon tip would be a one time deal.

 

[invertedisdead]

I'd recommend glass for an inert body.

Teflon has such a bad reputation it's pretty bold that a vaporizer company would even adopt its usage.

 

[uluckypeople]

OG units being discontinued. No longer available on the dynavap site.

https://www.reddit.com/r/Dynavap/comments/6hsoua/has_the_og_vapcap_been_discontinued/

 

[lookhigh]

That is a shame.. i still love my OG.

 

[Squiby]

OG units being discontinued. No longer available on the dynavap site.

https://www.reddit.com/r/Dynavap/comments/6hsoua/has_the_og_vapcap_been_discontinued/

That is a shame.. i still love my OG.

Looks like the OG is now officially a collector's item. In fairness, they did give us plenty of time to stock up on the OG when they announced the introduction of the M as the entry level replacement to the OG. It was clear that it would be soon discontinued.

Those that own an OG should cherish them as they are now part of the Dynavap history and a collectors item.

On the up side, the M is a much more durable entry level Vapcap. It was always so sad to hear of someone breaking their glass OG.

I say, LONG LIVE THE M!

 

[nickdanger]

OG units being discontinued. No longer available on the dynavap site.

https://www.reddit.com/r/Dynavap/comments/6hsoua/has_the_og_vapcap_been_discontinued/

I love my OG, and it still has a place in my rotation. Every time I use it, I remind myself how much I enjoy it. I'm glad I purchased a couple of extras some time ago before the M came on the scene, and will be extra careful with them.

 

[stark1]

OH, Gee. No more OGs!

But Ma, I kept breakin my OGs (my OGs kept breakin on me)!

 

[InterplanetaryTanner]

If anyone was curious about my arts and crafts project, I finished it up this morning. And its a failure.

These diametric really suck at being really magnetic on the flat surface… Instead, most of their magnetization power is on their sides… So while I can get the vapecap to stand up right on a few of them, it's an extremely weak pull…

I'll have to give it another try later, but with trying to get the magnet on the top. That's much more of a challenge due to shrinkage of the clay when it's fired. But I can probably pull it off.

 

[cybrguy]

You may also have a problem with the kiln temp reducing the magnetism of the magnet.

Or, you may not.

 

[ander]

Let us know how you like your M when you feel you have a handle on it.

I'm quite late so I thought that answering here was the better thing to do. Well I don't know what "M" means... but I think this thing is a Monster. A gift from the greatest company to all the vapers in the world.

Adding some random considerations..:

- the SS tip is the deal... opened the doors to customizations to me, since I've always my pockets empty. Why Dynavap didn't do it in 1 piece like the OG was but in steel..? Well I don't see a tecnical reason so I think they simply wanted to make people happy with a new, superior product.

- for a small price, a great upgrade. I've received my replacement OG body recently and I've used it rarely... I've found the M more efficient, maybe also tastier. In short, the M put my OG in a showcase. No tears.

- cleaning... ah, finally. I'm not a maniac but when I clean my vape I want to see it shining. Yesterday I've boiled the dismembered M with water and vinegar, and then brushed the inside of the tip with baking soda. Simply perfect...