Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

V

vaporist4LIFE

Well-Known Member
I know what you mean ;)
Rarely have I felt that way by a vaporizer, and certainly not like the FP!
purple kush shatter at 620 on the sic dish for bedtime .
Very euphoric and stress relieving :)
Ready for the vong I ordered to get here so I can finally test a different vape.
Haven't touched SUPREME or dabuddha, nada !
This PK dab is for you all :peace:
 
disGRUNTled

disGRUNTled

Well-Known Member
Black Jack,Oatmeal Raisin Cookie brown ale from CCB ,and the NBA Finals.
K0MG5xw.jpg

0BWCzrd.jpg

GNrjZUN.jpg

IIZJOKT.jpg
 
disGRUNTled

disGRUNTled

Well-Known Member
Welp, I put the original set up back on the nail. I think looking at the pics on website they have redesigned the lolli cap because mine will not fit flush over the "washer" on the head so I can carb it.
 
V

vaporist4LIFE

Well-Known Member
disGRUNTled said:
Welp, I put the original set up back on the nail. I think looking at the pics on website they have redesigned the lolli cap because mine will not fit flush over the "washer" on the head so I can carb it.
Click to expand...
Did you move it around a tad ? I found sometimes it takes a second to find the "perfect fit" that seals it all good and proper :)

----any cleaning tips for sic dish and quartz besides usual iso soak and q tip scrub ?
Noticed the quartz dish doesn't sit flat and has a slight tilt..hmm
---going to try a dab at 600 :D
Quartz is all clean and ready to go , only wish it was a tad wider so I didn't have to pull some cotton off the q tip to make it fit inside ..all minor criticism s on a spectacular device :)
 
anasrzi

anasrzi

Well-Known Member
I'd like ideas on SiC dish cleaning too @vaporist4LIFE as I'm lead to believe you shouldn't ISO SiC at all because it absorbs it! Quartz doesn't have that issue as its "sealed" where as SiC is more pourous.

Think qtip tech and a high burn off is enough for SiC but there must be something you can soak it in if needed?
 
V

vaporist4LIFE

Well-Known Member
anasrzi said:
I'd like ideas on SiC dish cleaning too @vaporist4LIFE as I'm lead to believe you shouldn't ISO SiC at all because it absorbs it! Quartz doesn't have that issue as its "sealed" where as SiC is more pourous.

Think qtip tech and a high burn off is enough for SiC but there must be something you can soak it in if needed?
Click to expand...
Good to know haha thanks for posting ! I already soaked it for a few minutes so oh well.only $10 ! Haven't used it yet so I'm glad I saw your message :)
I will torch it next time for sure
 
anasrzi

anasrzi

Well-Known Member
I wouldn't overly worry @vaporist4LIFE bare in mind it's only what I've read elsewhere concerning dnails version. Think torching it or ramping up to a high temp should burn off any residue, the rest should flake off and your good to go.

Read not to scrape it either using Ti scrapers/dabbers too :tup:.
 
Cannabis-Hardware-Ed

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
@Zow237 the vortex head could be accomplished by drilling compound angled holes with our 5 axis CNC mill. The head would be expensive and could only be done with titanium.

I slightly rotate the enail as I draw causing a similar effect.

We served up over 2k free flowerpot hits to the NorCal cannabis cup last weekend. Many choosing the extra dab on top. Everyone went away from our booth with a twax smile.
 
Last edited:
Zow237

Zow237

Well-Known Member
@NewVape710 wasn't me talking about the vortex ;) I asked about the eq screens fitting in the handled bowls patiently waiting for my mail lady to come :) went out and got myself a g of keif and an 8th of shake for this fp and I have 3 gs of sap just chilling waiting to be eaten by the fp :). Haven't vaped all day I want to get the full effect :). Pics ands vids to come :)
 
Last edited:
Cannabis-Hardware-Ed

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
MileHighHuman

MileHighHuman

Well-Known Member
NewVape710 said:
@Zow237 the vortex head could be accomplished by drilling compound angled holes with our 5 axis CNC mill. The head would be expensive and could only be done with titanium.

I slightly rotate the enail as I draw causing a similar effect.

We served up over 2k free flowerpot hits to the NorCal cannabis cup last weekend. Many choosing the extra dab on top. Everyone went away from our booth with a twax smile.
Click to expand...

Would the vortex head be too expensive to manufacture?

Or do you think rotating it works just as well?
 
Zow237

Zow237

Well-Known Member
My mailman is here and I'm just waiting for him to get through all the other apartments before mine haha. Just curb watching now haha
@NewVape710 btw grats on that 2k free hits :) I'm sure there will be plenty of people wanting to buy it now :)


Update: wow! This fucking thing is amazing! That's all I'm saying till my videos come up :) took a dab on the sic dish and it was tasty as fuck :) got a quartz dish to Compare to. Stupid me though went to blow in the bottom from a distance but high guy me accidentally touched the bottoms with my lip :bang: I'm an idiot haha
 
Last edited:
Likes2vape

Likes2vape

Well-Known Member
@NewVape710 is a great company to deal with!!! I found I didn't really need the enail handle and asked if I could exchange it for a 18mm base with handle. They had no problem with the exchange and didn't even charge a shipping fee, restock fee, etc. The base arrived today and it is awesome. The bowl is a little shallower and seems to vape the weed a better at a lower temp. Super tasty hits. It is much easier to dump your abv!!


BY8MPWn.jpg


Zow237 said:
I knew I'd burn myself but I didn't know I'd be kissing it hahah
@disGRUNTled that shit looks tasty as fuck
Click to expand...
sorry for laughing I found that extremely funny earlier I hope you are ok though.
 
Zow237

Zow237

Well-Known Member
Likes2vape said:
@NewVape710 is a great company to deal with!!! I found I didn't really need the enail handle and asked if I could exchange it for a 18mm base with handle. They had no problem with the exchange and didn't even charge a shipping fee, restock fee, etc. The base arrived today and it is awesome. The bowl is a little shallower and seems to vape the weed a better at a lower temp. Super tasty hits. It is much easier to dump your abv!!


BY8MPWn.jpg


sorry for laughing I found that extremely funny earlier I hope you are ok though.
Click to expand...

HahH :rofl:it was funny As hell. No worries brotha it was worth a laugh for sure. I was laughing as I was texting my wife and she laughed at me said "jeez Louise you're something else" hahh


What's the size of these screens for the handles bowl?
 
Last edited:
You must log in or register to reply here.
Top Bottom