Discontinued The Grasshopper
- Thread starter midgetsanchez
- Start date
btka
Well-Known Member
I also have problems with the immedeatly blue lights when turning on and no heat. as someone mentioned to tap it on the table... I did thatmane then the lights act normal 5 secbred light then blue but thenvapor was very thin then it seemed like the temp dial,did not work.. it did not make a differnce when changing temp I always got very very thin vapor production... since yesterday it is again turning immideately blue with no heat.. mybe I should tell them before sending it in for warranty... does your heat change when you move the dial... it would be very frustrating ifnI would get 7t back them statingmlightsmaremworking correctmbut the vapor is very thin..
maybe we could have a thread about gh warranty ...
as far as I can tell blue light withoutmheating is nowadays very common as seen here and on reddit... (pure speculation)
so @moondog they send the gh with the immediately blue light no heat back to you saying it is working.. does it produce thin clouds did you try if you turn the temp dial are the clouds the same on every temp setting.. laybenthey only checked the lights and not if it is heating correctly as I said before some rattle and taping didmsolve also ly light issue but heat was weak akd therefore small clouds... so Imwillmdeffintlymtellmthemmthat hey alsomchecknthe heat...
Last edited:
Man, you are on a roll....just please don't start up the automotive industry analogies.Well said, thank you.
Mr. Me2
Well-Known Member
Ok...you changed your avatar. I guess your gh honeymoon really IS over! I wish it wasn't so...
Well said, thank you.
I can't rep a product that I can't suggest is a great vape for others. LOVE the device, but it needs to not be such a flakey piece of shit. When that changes, i'll change my stance. I also have an extremely difficult time reading some posts in this thread. Frustrates me more than HL or the flakey GH. I feel this thread loses credibility. I LOVE to hear about all GH experiences both amazing and shitty, but I hate the blinders that some people seem to have on. At least it's pretty easy to see right through it.
JoeMama
Well-Known Member
crowd funded startup company (not to be confused with companies the budgets the size of small countries and staff greater than the population of small cities, so for example comparing GHL to LLBean is a recipe for disappointment, if you call GHL, that means a person has stopped what they were doing, which is either building a grasshopper, designing a refined part, repairing a grasshopper or fulfilling and order, to talk to you unlike LLBEAN, the person who answers the phone (who may or may not actually work for LLBean, in fact is more likely to be in a prison somewhere, at best a minimum wage call center, that's their only job, and they didn't have to stop making new shoes in a factory that is probably also not owned by LLbean, see the "subtle" difference?).
Sorry, but I gotta call BS on this...
When Pax first started, and to this day, they had stellar customer service VIA TELEPHONE. They would actually call you back to find out how the most recent tech call went. Then it moved to email call-backs.
If I spend $350 (read, "Three hundred fucking fifty dollars"), I want to be able to talk to someone if necessary.
And, from what I've read here, and I know it isn't vetted fact (alternative fact?), but if GHL is refurbing Hoppers by burnishing the metal (which conveniently obscures blemishes) and selling them for $100 (read, "One fucking-hundred dollars") more, well... shit.
Last edited:
guyonthecouch
Well-Known Member
How come we're not doing our due diligence as a community and figuring out how to fix these issues on our own? That's the best part about this site, the DIY factor.
Every other vape thread has users with warranty issues that get positively assisted through our members. But the Hopper gets no love?
I went and did some experimenting with my buddy who has an early backer unit. I noticed many differences and think the hot back end issue is caused by a front end thread "issue". The reason for this is, my Ti with it's matching front end works fine, no heat issues. With his early backer Ti front end on, the back end would randomly heat up. So maybe something to do with front end threading connectivity could be displacing heat throughout the unit incorrectly. The screens on the early backer units have larger air holes. This could be a factor in the "hot" airpath issues for users. I have never experienced an uncomfortable heat draw from my unit with the smaller screen holes.
Do yourselves a favour and stay off of reddit.
@biohacker - Just curious have you contacted HL at all throughout your troubles? They have excellent CS despite what the internet claims. I highly recommend it if not. The more descriptive from the get go the better. Cheers
Every other vape thread has users with warranty issues that get positively assisted through our members. But the Hopper gets no love?
I went and did some experimenting with my buddy who has an early backer unit. I noticed many differences and think the hot back end issue is caused by a front end thread "issue". The reason for this is, my Ti with it's matching front end works fine, no heat issues. With his early backer Ti front end on, the back end would randomly heat up. So maybe something to do with front end threading connectivity could be displacing heat throughout the unit incorrectly. The screens on the early backer units have larger air holes. This could be a factor in the "hot" airpath issues for users. I have never experienced an uncomfortable heat draw from my unit with the smaller screen holes.
Do yourselves a favour and stay off of reddit.
@biohacker - Just curious have you contacted HL at all throughout your troubles? They have excellent CS despite what the internet claims. I highly recommend it if not. The more descriptive from the get go the better. Cheers
XxFourDubxX
Well-Known Member
I got a great deal on the ss model online and shipped same day. I'm probably going to save for a ti model also so when my ss goes down I'll have a back up when I do a warranty request.
Gramin
Well-Known Member
Not too sure about that considering the unit works fine without a mouth piece screwed on. Also if this was true would we not be seeing oxidation buildup on the threads and be basically inhaling it? I have not seen any buildup besides plant matter.
splitz
Well-Known Member
PSA:
Hopper and bath time don't mix!
It sounded like a nice idea relaxing in the tub enjoying the Hopper, but I should have known better. I received quite the jolt after fumbling it live in hand, eventually hitting the water.
Disassembled my sopping hopper immediately, and placed in a ziplock bag filled with rice. Left bag in my furnace room overnight and voila - she works perfect the next day. Can't believe how lucky I am - this hopper remains unregistered.
Vapman exclusively for tub time moving forward.
Basmati ftw!
Hopper and bath time don't mix!
It sounded like a nice idea relaxing in the tub enjoying the Hopper, but I should have known better. I received quite the jolt after fumbling it live in hand, eventually hitting the water.
Disassembled my sopping hopper immediately, and placed in a ziplock bag filled with rice. Left bag in my furnace room overnight and voila - she works perfect the next day. Can't believe how lucky I am - this hopper remains unregistered.
Vapman exclusively for tub time moving forward.
Basmati ftw!
Baron23
Well-Known Member
Wow, man. Also, don't take a radio or hair dryer into the bath with yourself (and don't run with sissors either!)
Just having a bit of fun with you. Glad your GH recovered well from its dunk.
Mr Mellish
Well-Known Member
So the recommended situations for the Vapman grows:
- Zombie apocalypse -- Check
- EMP blast -- Check
- Bath-time -- Check
JoeMama
Well-Known Member
Thanks, Ratchett.. I myself have no real need for this stand, but it's good to know we can ask you for customizations when it is possible!
If by "front end" you mean the Mouthpiece, there is no way that the MP has anything to do with how well or poorly the Hopper heats up. If it appears to be so, then you may have poltergeists.
This forum has a Resource Thread
Grasshopper Fixes
It began a while ago, and there are things on there that are still up for debate, but also some very helpful tips.
slcbdco
Brewer, Lobbyist, Vaporist
PAX must of had support from APPLE!
Not apple, just a major Japanese Tobacco companies and venture capitalist to the tune of several tens of millions of dollars
http://www.inc.com/will-yakowicz/pax-labs-vaporizer-company-raises-47-million.html
A little different a capital position to be in than reason WHOA 3.6 hundred thousands dollars
https://www.indiegogo.com/projects/grasshopper-vaporizer#/
You see everybody, even my lying eyes have been wrong, Grasshoppers are totally pieces of garbage, you can't even swim with them! but seriously glad both you and your hopper are okay, its exactly this reason that bath time is still spliff time in my house ... although I did manage to use my pax2 floating in the pool last summer ... that must be how they spent that extra 46.5 million dollars ... that and people to answer the phone apparently
Oh and guess whats going back for an RMA today my Davicni IQ ... I'm not gonna go say ergo Davinci is a terrible company, things happen with a new product launch, even for "established" companies in what is a new space and new technology space, portable vaporizers, do I wish the bowl hadn't cracked within a week of getting it? Sure, do I wish they had responded to my email that second? Sure but how old is that company 5 years maybe, I still remain convinced that most people who buy vaporizers are generally happy and a very vocal minority have what are in fact probably only slightly below average experiences which prompts wild speculation in a vacuum which is too bad because it detracts from those coming to look for good information.
For myself I keep coming back because its highly entertaining, gives me something to do while I wait for my Firefly 2 to finish in the washing machine ...
Last edited:
JoeMama
Well-Known Member
Icon13
Serial Vapist
It's called a Coincidence, so don't look too much into it. I pretty much only use my Hopper with the condom on because it always use it through a water tool. My fourth body is arriving today. I've had the cop lights numerous times. Try not to draw any conclusions without a large sample pool, and I can almost guarantee your Hopper is going to crap out sometime in the next few weeks.
I sent my unit out on Friday and I will receive it today on Thursday making it a Six-Day process from California if anybody is interested.
sk8man121
Frozen_Vaporent
Hey guys, my hopper just returned from boulder from a warranty request, and it appears that the front end (i didn't send that part in) now struggles to fit onto the body. I have to sort of force it past those initial threads to get it to slide on, but before I sent the unit in it would slip on with no issues at all.
Has anyone experience this? I'd like to not strip the threads, what should I do (HL has been notified)?
Has anyone experience this? I'd like to not strip the threads, what should I do (HL has been notified)?
tubasco
Well-Known Member
The front end is bent ever so slightly. Gently pinch it as you put it on the body and you'll find which direction it is slightly out of round. Give it a good squeeze, and you'll be good to go.
(In my opinion this is exactly why the front end threads are way down by the tip.)
I was detailed in my description with the retailer that passed on the message (I believe they are the retail distributor for Canada) to HL, and was informed it's completely normal. I don't care about the flickering blue led, it's the super inconsistent anemic clouds that happen more times than not like some people are complaining about.
But hey, at least I got a screen in my front ends!
hell0kitty
New Member
Hi! Does anyone know (or care to venture a guess) how much the price increase will be on Feb 1? I'm torn between waiting for VF to restock or purchasing now from HL. I believe with the free shipping and the -20% VAT (Canadian here), it might be better to wait for VF. However after seeing the price hike for the HT hoppers I'm not sure anymore. Also, it's my understanding that I'd be less likely to pay the customs duty if I order from VF--although I may be wrong.
Thanks in advance!
Thanks in advance!
MoltenTiger
Well-Known Member
I am starting to think the only way HL are gonna fix this anemic cloudage issue is with mains power.
I feel like tonight I was getting some weaker vapour, so I had a heap trying to have that nice fresh GH bong feeling. I finally got there with a battery fresh from the charger, so I'm going to call it and say that GHB2s are of the same relative durability as GHB1s, time will tell and you heard it hear first but... yeah fuck batteries. The practical bastards. Invest in graphene capacitors.
I've been working in a tiny tech start up this last year, so I can relate somewhat to HLs position, but these guys should have just outsourced assembly and redirected funds from custom batteries to more efficient development and top-tier 14650's. Better quality, better profit.
They bit off more than they could chew, but they've held it together for three years. Four years ago the grasshopper was a computer render and a blurry idea. Four years later, just compare them to Evoke.
HL have certainly had an appalling amount of continual blunders, but their product is a good one and is actually available and finally exists in numbers.
I'd urge you @biohacker to keep hassling them until they acknowledge and fix your problem, you too @moondog. Just be descriptive and concise. I've had to get a lot of spare parts but I've made it my business to get what I paid for. There have been dodgy batches floating this whole time, don't fuck with them.
Part of the reason it has taken so long to enter full production is because of their notorious failure rate (the reason it is unsustainable to have such a high failure rate is demand can't be met, they have lived a gamble) and they have relatively slow sales. They don't have massive cashflow, and what they've set up requires one. It's risky business, and I understand where they're not doing enough, but be fair and acknowledge what they have (three dudes are this company, which is now probably 12-36). This is a crowd sourced project and if the crowd is petty then it will simply flop. Either way, there's more products on the horizon, but the GH is still it for now. Though they give us all many reasons to be rationally petty.
I've sent plenty of emails to HL but it's been a good while since I've needed to, as long as they answer them I'll keep using their product and SOSing when needed, otherwise I'd just be smoking as nothing really compares for my use unless I somehow get a supreme 3 and rationalise that chunky beast as appropriate
I feel like tonight I was getting some weaker vapour, so I had a heap trying to have that nice fresh GH bong feeling. I finally got there with a battery fresh from the charger, so I'm going to call it and say that GHB2s are of the same relative durability as GHB1s, time will tell and you heard it hear first but... yeah fuck batteries. The practical bastards. Invest in graphene capacitors.
I've been working in a tiny tech start up this last year, so I can relate somewhat to HLs position, but these guys should have just outsourced assembly and redirected funds from custom batteries to more efficient development and top-tier 14650's. Better quality, better profit.
They bit off more than they could chew, but they've held it together for three years. Four years ago the grasshopper was a computer render and a blurry idea. Four years later, just compare them to Evoke.
HL have certainly had an appalling amount of continual blunders, but their product is a good one and is actually available and finally exists in numbers.
I'd urge you @biohacker to keep hassling them until they acknowledge and fix your problem, you too @moondog. Just be descriptive and concise. I've had to get a lot of spare parts but I've made it my business to get what I paid for. There have been dodgy batches floating this whole time, don't fuck with them.
Part of the reason it has taken so long to enter full production is because of their notorious failure rate (the reason it is unsustainable to have such a high failure rate is demand can't be met, they have lived a gamble) and they have relatively slow sales. They don't have massive cashflow, and what they've set up requires one. It's risky business, and I understand where they're not doing enough, but be fair and acknowledge what they have (three dudes are this company, which is now probably 12-36). This is a crowd sourced project and if the crowd is petty then it will simply flop. Either way, there's more products on the horizon, but the GH is still it for now. Though they give us all many reasons to be rationally petty.
I've sent plenty of emails to HL but it's been a good while since I've needed to, as long as they answer them I'll keep using their product and SOSing when needed, otherwise I'd just be smoking as nothing really compares for my use unless I somehow get a supreme 3 and rationalise that chunky beast as appropriate
Last edited:
My guess is $199 and $249 but why not buy from Toronto Hemp Company? Are you afraid you will have the same experience as my two? lol
I have to thank you @MoltenTiger , you've put things in perspective and perhaps I will start badgering and just try to obtain the product that I thought I purchased, instead of just selling at a loss. I love the GH when it works properly, but I have 3 out of 4 GH's down presently (well one is just because of stripped front end threads) so i'm kinda bummed. I get too frustrated using the flakey hoppers so they are tucked away for now.
hell0kitty
New Member
Thanks for your response! The Ti plain and SS comes out to be approximately $430 and $350, respectively, with tax and shipping. While I wouldn't have to wait for the hopper to pass through customs with THC, the SS is similar to the value of the Ti offered by VF--and from what I have read, both are superb but Ti is better in terms of heat up/cool down time, lighter, etc.
Honestly, the fact that it's also more scratch resistant makes the OCD in me a lot more interested in the Ti lol. If anyone has both, can you comment on the wear and tear of your grasshoppers over time?
I do hope that the price hike will be ~$25. When I asked around on reddit, the estimate was $50~$100.
Mr. Me2
Well-Known Member
Hi and welcome @hell0kitty !
Anything you've read about the amount of upcoming price increases are just guesses. Only ghl knows for sure, and they're not talking...