Dynavap VapCap

[StormyPinkness]

I don't know if your a fan of vaping vape reclaim but I use a skillet tools flexy first to scrape the vapor condensation oUt of the condenser first then just shake the last residual out with iso after I claim as much condensation (reclaim) as possible...

The OG has been the easiest cleaning reclaiming job I've had with a vape. I have a blunt end condenser.

The only tool I need to use on it.
http://m.ebay.com/itm/281806547575?_trksid=p2141725.m3641.l6368

This looks really interesting, it sounds like you really like it? The flexibility of it isn't bs? I always have trouble getting reclaim out of smaller stuff like the vapcap and globe glass. I started using wax paper I folded a bunch of times to make it stiffer. I have a silicone tipped tool I want to try, but if that doesn't work well I think I'll order this. I'm not a fan of reclaiming via iso soak, I just do that to clean.

 

[farscaper]

This looks really interesting, it sounds like you really like it? The flexibility of it isn't bs? I always have trouble getting reclaim out of smaller stuff like the vapcap and globe glass. I started using wax paper I folded a bunch of times to make it stiffer. I have a silicone tipped tool I want to try, but if that doesn't work well I think I'll order this. I'm not a fan of reclaiming via iso soak, I just do that to clean.

Actually it's the only skillet tools I use for everything. I have a master kit... but I can say the flexy is all around the best tool... and its the only one I actually use. Just push it down the condenser tube from mouthpiece to bowl end and turn and repeat until clean. Then just scrape it on some flowers and vape it like concentrate. The tip is like a tiny blade that's just perfect for my need. I don't like to reclaim with alcohol unless I'm throwing it out. So I just scrape it and vape it.

It's the perfect dabber to.

 

[Squiby]

There was a treat in the mail for me today. From Great Britian to Canada in 9 days.
Custom stems for my Vapcap!!!! WHOO WHOO!!!

Many thanks @phattpiggie!!!

They are beautiful and my camera just does not pick up the luster and fine finish on the wood, let alone the beauty of the wood itself!! They feel like butter in my hand. Beautifully buffed and polished!!!

I haven't tried them yet but will shortly. For comparison, I took a pic of my new stems alongside a few Vapcaps since there has been a lot of interest in the various sizes of Vapcap dimensions.

So, here they are from top to bottom:

- Ti VonG. 45mm x 14mm Burl VonG body and mp. 3.5" long.

- Ti Woody XLS. 62mm Black and White Ebony stem and Blackwood mp. 4.25" long.

- Ti tipped Vapcap with @Phattpiggies Olive stem. 5" long.

- Ti tipped Vapcap with @Phattpiggies Thuya Burl stem. 5.5" long.

I think I just might as well have to get stoned tonight...

 

[poutine]

First post on FC! Just got my Omnivap and TI Woody XLS this week. Both have been absolutely fantastic and have kept me microdosed just like I enjoy. Already looking at a Dynstash ER...but I don't see the section for the wood bodies on the website (unless I'm missing it or just need to ask Randy/Matt) To use the woody, I think I'd have to get a standard condenser and shorty wood body right? Really enjoying this and the GH thread!

 

[nickdanger]

I'm anxiously awaiting my Vapcap OG order that I was notified is "complete", but not sure how long it takes to get it after that notice. I also have an Omni, blackwood body and Dynastash ER on an order that I placed early August. Super excited to be getting mine soon!

 

[smokeydabear]

I got a carbon fiber body for my omni and I gotta say its pretty damn sexy. Whereas the wood bodies kind of remind me of something classy like an old school Caddy, the carbon is a turbo charged sportscar. Just in style only I mean. I like it because it doesnt get hot or even warm at all. I feel like the airflow of the carbon might be a little more restricted than the wood or titanium body but thats just my opinion. Good stuff though. P.S George might be the G.O.A.T of vape creators.

 

[Jethro]

Got my OG in hand tonight and have vaked myself seriously silly for a school night. I'm gonna be junk at work tomorrow. Just had to enjoy this amazing device. Watching my Patriots beat the crap out of themselves while puffing on the Vapcap. Got some trainwreck to watch this train wreck it self, and it's great for this simple hitter.

I've been able to get massive clouds with amazing flavor right away on my 3rd attempt at heating, and the first one was a dry run! I have not had one problem with combustion and I've heated up to maybe 2 full seconds beyond the click. I find that with fresh green, it's still full of moisture and it can take a bit more heat. Can take 3 good draws with good, full, tasty vapor per click. Very evenly toasted ABV. I have even tried not grinding and let me tell you, I'm happy about not being shackled by a grinder. I'm heating with a Zico single flame torch and its not too bad, but I'm going to place an order for a Ti Burley and a Dynastasher and I'll have him send the triple flame unit. Sent in a request on the website so I hope Matt or George or whoever gets ahold of me, probably after the holiday weekend which is no problem. I gotta say, I was a little uneasy about spending $100+ on one of the fancy ones, I mean it's just a bat, right? But now I understand! Worth it at twice the price! This thing is great, so simple, beautiful, effective, efficient...

To anyone putting off an order, just do it, this thing is really incredible like everyone has been saying. Believe the hype.

I got this CVault from Randy at PIU today as well! A good home for my Trainwreck!

 

[Squiby]

First post on FC! Just got my Omnivap and TI Woody XLS this week. Both have been absolutely fantastic and have kept me microdosed just like I enjoy.

Welcome to the forum!!! We all love our Woodys here, are enchanted by our Omnis and charmed by our OGs.

Already looking at a Dynstash ER...but I don't see the section for the wood bodies on the website (unless I'm missing it or just need to ask Randy/Matt)

On the DynastashER page, scroll down and near the bottom there is a selection dropdown box labelled "Wood Variety". You can choose from Leopardwood, Wenge, Bocote and Paduak. If you want something different, custom, you will need to Contact them.

Here is a visual of the wood varieties

o use the woody, I think I'd have to get a standard condenser and shorty wood body right?

If you are asking if you need to switch your Woody XLS stem for a short body and regular condenser to fit into the regular DynastashER, YES.

Or, you could get just a regular condenser to replace the XL condenser and mp. Then you would have a regular blunt ended Ti Woody with no mp. This would fit into the regular DynastashER.

Or, you could get a DynastashER XL. It will store your Ti Woody XLS as is.

I'm anxiously awaiting my Vapcap OG order that I was notified is "complete", but not sure how long it takes to get it after that notice.

After your account moves from processing to complete, shipping is imminent. You will then receive an email, or at least I did, with your tracking number. From there, depending where you are, it could take a few days or a couple of weeks. I am in Canada and received my package within a week of receiving my tracking info.

 

[little maggie]

There was a treat in the mail for me today. From Great Britian to Canada in 9 days.
Custom stems for my Vapcap!!!! WHOO WHOO!!!

Many thanks @phattpiggie!!!

They are beautiful and my camera just does not pick up the luster and fine finish on the wood, let alone the beauty of the wood itself!! They feel like butter in my hand. Beautifully buffed and polished!!!

I haven't tried them yet but will shortly. For comparison, I took a pic of my new stems alongside a few Vapcaps since there has been a lot of interest in the various sizes of Vapcap dimensions.

So, here they are from top to bottom:

- Ti VonG. 45mm x 14mm Burl VonG body and mp. 3.5" long.

- Ti Woody XLS. 62mm Black and White Ebony stem and Blackwood mp. 4.25" long.

- Ti tipped Vapcap with @Phattpiggies Olive stem. 5" long.

- Ti tipped Vapcap with @Phattpiggies Thuya Burl stem. 5.5" long.

I think I just might as well have to get stoned tonight...

These are beautiful. I finally gave in and ordered an ebony woody. How do I get something like an olive vong?

Just an aside- I've been alternating all my dynavaps and the classic just seems to combust no matter what I do. No problem with the others. I think my classic is going into my Vitolo package.

 

[Squiby]

These are beautiful. I finally gave in and ordered an ebony woody. How do I get something like an olive vong?

Just an aside- I've been alternating all my dynavaps and the classic just seems to combust no matter what I do. No problem with the others. I think my classic is going into my Vitolo package.

@phattpiggie made the Olive stem and the Thuya Burl stem. PM him and check out his thread; Phattpiggies Wood Shed.

http://fuckcombustion.com/threads/phattpiggies-wood-shed.22215/page-2#post-1018197

Really nice!

 

[Cowputer]

The method that by far has not only kept my glass OG clean but I have been using to reclaim the left over goodies on the glass.

Using everclear with a 1oz Amber glass bottle w/dropper I found that the condenser tube can be put in the place of the glass dropper and kept in Amber bottle with everclear. Having an extra body and condenser tube is helpful as I do let mine sit in there for a day or two longer when I forget about it.

You do have some small left over particles in the everclear but needless to say the color will change and will only continue to as long as you continue to clean with the same everclear.

Condenser tube before along side the glass dropper and container. I do remove the o ring.

OG Body in the amber container with everclear and cotton piece at bottom to prevent glass on glass contact. Oh I also remove the screen/CCD prior to bath.



And then the yellow/golden left over goodness that I can enjoy at a later time. The longer I wait the more potent it can get.

I use 2 different containers one for the bodies and one for the condensers. The 1oz container keeps the body nice and snug once you close it and I do shake it once or twice. Very easy to do and worth the effort! IMHO.

I've yet to try the new tubes but am looking forward to it.

 

[vapen00b]

Happiness is:

realising your omni works amazing with the Orbiter, and that the silicone mouthpiece makes such a good friction fit that you can literally turn the omni body mid-draw, adjusting the flow until you actually SEE yourself hitting the sweet spot and start to thicken up the vapour.... This bloody thing never ceases to amaze me!!

And I swear, it's really making me want another omni to add to the Vong that I'm gunna order when the double helix tips are out, because the adjustable airflow is a bloody NECESSITY through water now that I've tried it!! I thought my VAS was over with the omni, and I could put my money towards... I dunno.... A house or something, but no, I need more vape ware....


Try it guys, please try it.... I'm truly wrecked haha

Peace

Very nice setup man. How do you manage that to heat the cap. Remove, heat and insert? Since you can't spin the OV mouthpiece ...



@Squiby Ooooh, I LOVE your collection. It's beautiful!! Really like @phattpiggie 's pieces... Gotta check one out one day. Tight on funds right now, but makes me drooling already

 

[Vapor_Eyes]

For those looking to shave some weight off their vapcap...carbon fiber, available Sept 5th!
https://instagram.com/p/BJ0c-wkgQFi/

Just when I'm about to have one of each, glass, wood, and metal, this happens. I think a carbon fiber body would be really cool for my omni.

@CarbonFiberGuy might have to join in the fun now!

 

[herbalist33]

Very nice setup man. How do you manage that to heat the cap. Remove, heat and insert? Since you can't spin the OV mouthpiece ...



@Squiby Ooooh, I LOVE your collection. It's beautiful!! Really like @phattpiggie 's pieces... Gotta check one out one day. Tight on funds right now, but makes me drooling already

Hey buddy, yeah you've got it: il heat up the Omni in my hand, and then drop it in the Orbiter. Whilst I'm drawing, if I twist the omni body while applying a little downwards pressure, the mouthpiece stays in place and the body spins, opening and closing the air intake. This would most likely work with all other 14mm joints, I just never tried it before. Il have to try it on the FC-UFO, because my OG was struggling to milk it, but I reckon I can dial in the omni to perfect milkage!

Peace

 

[Andreaerdna]

Hey buddy, yeah you've got it: il heat up the Omni in my hand, and then drop it in the Orbiter. Whilst I'm drawing, if I twist the omni body while applying a little downwards pressure, the mouthpiece stays in place and the body spins, opening and closing the air intake. This would most likely work with all other 14mm joints, I just never tried it before. Il have to try it on the FC-UFO, because my OG was struggling to milk it, but I reckon I can dial in the omni to perfect milkage!

Peace

I use my omnivap with orbiter natively, no adapter.
i think it may be depending on the glass welding of the downstem of the orbiter but I simply drop OV in the orbiter and I get a functional seal (some little air pass but not enough to bother IME)

They do pair quite well

 

[herbalist33]

I use my omnivap with orbiter natively, no adapter.
i think it may be depending on the glass welding of the downstem of the orbiter but I simply drop OV in the orbiter and I get a functional seal (some little air pass but not enough to bother IME)

They do pair quite well

Yes, I actually found this out before I went to bed- forgot to put the silicone mouthpiece on the omni when I put it through the orbiter, but still got a hit... I do prefer the seal the silicone gives though, but the ease of using just a native omni I awesome in a pinch.

Peace

 

[poutine]

Thank you Squiby! I wasn't quite clear-I have the Dynastash ER in my cart already, I'm just a bit confused how to get a wood body and mp on a standard condenser to fit in the regular stashes

And then the yellow/golden left over goodness that I can enjoy at a later time. The longer I wait the more potent it can get.

Awesome idea!

 

[Jethro]

I got a weed hangover. This Vapcap hammered me last night!

 

[alltoreup]

Some hair of the weed out of that same vapcap will fix that right up @Jethro

 

[herbalist33]

I got a weed hangover. This Vapcap hammered me last night!

I've had a weed hangover ever since I got my Vapcaps... We're talking around 6 months if not longer! It's been a blissful, lethargic few months haha.

Enjoy.

Peace

Edit: just checked, it's been a blissful 8 months since I got my OG, wow that time flew by!

 

[Squiby]

I wasn't quite clear-I have the Dynastash ER in my cart already, I'm just a bit confused how to get a wood body and mp on a standard condenser to fit in the regular stashes

OK. So, you are wondering how to go about purchasing an extra short body, mp and regular condenser to switch up your XLS so that it will fit a Dynastasher?

If I've got your question right, then....

You can buy the standard condenser and mp in the parts section of the Dynavap website. But, I don't think they have individual bodies posted on the website yet.

So, I suggest that you contact them and let them know that you want to convert your Woody XLS to an S. Matt will sort out what you need. You can pay by adding a contribution to your cart.

I hope that I have answered your question.....this time

 

[Jethro]

Some hair of the weed out of that same vapcap will fix that right up @Jethro

I just was informed my boss is closing up at noon, so I'll be vapcapped in no time!

Matt got back to me today, getting ready to pull the trigger on a sweet vapcap setup but this original is pretty awesome in the meantime.

 

[jim-bob]

So, I've got two Omnivaps - one from the Puffitup launch, one direct from Dynavap this past week. The one that just showed up this week came with a glass body as well as the Ti, so I've been using it with that.

Now, I'm finding a better experience with the glass-bodied Omni than with the Ti body. It seems to heat up smoother, taste better, and char less. Would this be a variable with the caps or is it all down to the body material? Or are there rolling changes to the Omni in the past month that would have been responsible for this?

Don't get me wrong, the Ti is still very good, but the glass is better.

If I wanted to get a glass body that fit my other Omni, what would that be on the site? Or is that an off-the-menu item?

 

[lookhigh]

Omnis in stock @ piu.

 

[Squiby]

If I wanted to get a glass body that fit my other Omni, what would that be on the site? Or is that an off-the-menu item?

They are not up on the website yet. Email Matt through the Contact page and he will fix you up.