There isn't a listing on the site right now. On discord, iDB mentioned they are fulfilling the preorders this week and any extras will be on the site after that.
Zeal, Ω, and Epitome
- Thread starter iDRINKBLEACH
- Start date
Edit: grass beat me lol
Kits appear to be down right now. He’s filling preorders currently and someone mentioned he said the extras would be listed shortly. I’d keep an eye on the zeal and omega section and join the discord to keep up with announcements if you haven’t. I can dm a link if needed. Don’t want to post it publicly because we keep getting spammed
whateverman
Well-Known Member
I pulled the trigger and bought an omega coiled kit.
Now I have to figure out how to clean it before using it. Is it recommended to wash the balls or steel in iso? Or is the heat enough?
You can rinse in iso if you would like but a 20 minute burn off at 700 should do fine. The parts seem to come very clean.
whateverman
Well-Known Member
Roger.
Now for glass..... im gonna buy this piece unless you guys have a better option
If you’re going the DH gate route I would go with that or the fc-199 piece from the same seller. If you can’t find it in their store search fc-199 on google.
If you aren’t confined to a lower price point I’d check out all the pretty protégé’s and mini influxes on CC’s website right now. Both pieces are fantastic.
coolbreeze
Well-Known Member
The 3-hole one looks best for flavor, fwiw. It should be plenty of cooling, especially with the ashcatcher.
Yeah, sort of like the TAG showerhead rig but with a fab section. Looks pretty cool.
No doubt excellent choices.
I would add the Vertex, it is one of the finest utility pieces I've come across. It's a suitable daily driver, great with everything I've tried. Can't recommend it enough.
Vertex
Vertex stands at 12.5 inches tall with mouthpiece. This glass piece is unlike any other on the market with a Swiss perc downstem, 4 hole diffuser, faberge body, and a spiked mouthpiece. This is an 18mm glass piece. This piece will be well balanced between Prophet and Protégé, whereas one is pure...
cloud-connoisseur.company.site
whateverman
Well-Known Member
The cc glass looks amazing but its pricey.The 3-hole one looks best for flavor, fwiw. It should be plenty of cooling, especially with the ashcatcher.
Yeah, sort of like the TAG showerhead rig but with a fab section. Looks pretty cool.
No doubt excellent choices.
I would add the Vertex, it is one of the finest utility pieces I've come across. It's a suitable daily driver, great with everything I've tried. Can't recommend it enough.
Vertex
Vertex stands at 12.5 inches tall with mouthpiece. This glass piece is unlike any other on the market with a Swiss perc downstem, 4 hole diffuser, faberge body, and a spiked mouthpiece. This is an 18mm glass piece. This piece will be well balanced between Prophet and Protégé, whereas one is pure...
In the meanwhile theres this piece from tag at like 79 bucks..
*CLEARANCE* - TAG - 12" Super Slit Bellow UFO Dab Rig Bong 65x5MM (18M
Yet i have been told not to buy it for vaporizers because of blowback, so the former straight formfactor may be more suitable.
Yep, I have that. It has serious blowback. So that would be my advice. Buy the puck version, or better yet the donut with the modular MP.In the meanwhile theres this piece from tag at like 79 bucks..
*CLEARANCE* - TAG - 12" Super Slit Bellow UFO Dab Rig Bong 65x5MM (18M
www.thickassglass.com
Yet i have been told not to buy it for vaporizers because of blowback, so the former straight formfactor may be more suitable.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I highly recommend this one, with the main diffusion downstem, no ash catch unless you want a second chamber to filter and fill... Three holes more flavor but much more chug, the nine holes with open bottom still lets plenty of flavor through with a smooth pull and a nice balance of diffusion (the other one I think they call shower head is a circ perc that offers the most diffusion least flavor) Great way to begin, otherwise the side slit inline honeycomb from them is a really effective coverall rig too
bizwaxzion
Enigmatic Cannabist
I just got the Omega Lite kit and while I like the performance, getting the head out of the coil is a nerve racking experience. The stand that comes with the vape is seriously flimsy and doesn't hold the coil well at all and allows it to spin on it's horizontal axis and go up and down on the vertical axis which makes getting the 500F head out a two handed challenge. Seems like the coil holding device is the heart of a wireless setup and I now understand the designs of some of the others on the market. Guess I'll have to DIY something a bit more substantial...
I haven't tried the clamp that comes with the wireless lite kit, but I can also understand wanting to DIY something that you like.
I have seen some folks have installed the clamp on the wrong place on their coil. You might want to try adjusting it to the wider part to prevent the coil from moving. I'd play around with it cold until it seems stable.
One person had the axial coil damaged in shipping and it made it harder to remove the vape from the coil. I hope that didn't happen to you, but I thought I'd mention it. These are just things I had observed on discord.
I think a lot of people love the "two piece Amazon" stand for theirs:
bizwaxzion
Enigmatic Cannabist
I tried both sections of the coil - neither section provides positive clamping. I will inspect the coil for proper fitment, but it seems to slide in and out easily when the coil is not allowed to move around (cold and in my hand). Thanks for the links - will take a look at those also.
If you have an Omega you have everything you need. If you want to run the bowl cold, you can grab it by the joint. It doesn't get too warm for that. However you can buy a wireless ring and handle. I have one and I like it.
If you want to heat your Vulcan, you would just use the coil as the handle.
TedJones
Well-Known Member
Have you tried this? And recommendation for a coil that I could use with one of my non-XLR PIDs?
Yes I highly recommend it if you are not too lazy, like I am most daysHave you tried this? And recommendation for a coil that I could use with one of my non-XLR PIDs?
Your controller is not XLR? Is it the old NV one? Or the mini-xlr from mininail?
TedJones
Well-Known Member
Nah I’d be using the DC mini or CH controller for the bowl coil.Yes I highly recommend it if you are not too lazy, like I am most days
Your controller is not XLR? Is it the old NV one? Or the mini-xlr from mininail?
Oh those should be fine lol.
TedJones
Well-Known Member
Actually, I do have XLR types in the crossing tech (not CH) & DC micro. Looks like I’d just need a 20mm coil if I went with the bowl and wanted it heated. Read in another place a cold bowl may be too cold without it?Cold bowl isn’t too cold without but will stick to the omega if you use it with the 14mm injector. With the diffuser you will have zero issues not heating the Vulcan. Any 20mm coil will work fine with the Vulcan but the cc coil with the extra wrap doesn’t require stretching of the coil to cover the body.
Just a heads-up. If you are interested in something new and cool, you should probably read the announcements channel on the CC Discord.
According to iDB, everything will be on the site soon but discord folks are getting early access. If you really don't want to join the discord, send me a DM and I'll send you the hidden links. Gotta look out for the good people of FC too
According to iDB, everything will be on the site soon but discord folks are getting early access. If you really don't want to join the discord, send me a DM and I'll send you the hidden links. Gotta look out for the good people of FC too
I personally don't like ball vapes with concentrates. But the Vulcan adds a lot of conduction (when using an enail to heat it), so that would definitely be superior.
I have heard of some ideas that iDB has kicking around for expanding the Omega platform to better support concentrates.
Although right now, for me, nothing beats a good banger.