Yocan UNI Pro Box Mod Fits ALL Oil Cartridges
- Thread starter Yocantech
- Start date
-
- Tags
- box mod uni pro yocan uni pro
Well, I did order one of these and it should arrive tomorrow. Guess I will be visiting the new neighborhood dispensary soon after all...
Enjoy!! Funny this thread popped up as I just pulled mine out of the drawer. Got a gram of non-distilled, non-winterized Fruit Punch Co2 Sauce going right now!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Mine came today. I was a little afraid it was gonna be bigger than it actually turned out to be.
I ordered an extra magnetic adapter for it but I appear to have ordered the wrong one. It is a ring with no magnet.
Now I have to get a cart to try this baby out.
Oh yeah the ring works work the Yocan Witt and Groote, I guess you'll have to get one of those too!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah the one that comes with this was definitely taller than the flick, though similar style
cybrguy
Putin is a War Criminal
The gold one on the right is what I accidentally ordered along with the Uni Pro. I meant to get the other one that is magnetic. The folks at nextdayvapes.com insist that the ring adapter would work, but it wasn't what I was after. Much shorter as you can see, and only 2 cutouts rather than 4...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
The gold one on the right is what I accidentally ordered along with the Uni Pro. I meant to get the other one that is magnetic. The folks at nextdayvapes.com insist that the ring adapter would work, but it wasn't what I was after. Much shorter as you can see, and only 2 cutouts rather than 4...
Yes I said before the rings go for a different type of magnetic connection, I guess where the magnet is in the vape, like the Witt and Groote and Handy... that specific one in the picture actually might look more like the one that goes with the v-mod made by a different company...
cybrguy
Putin is a War Criminal
It was one of the 2 adapter options on the page where I bought the YUP. If it really isn't meant for that device it is a little disappointing that they offer it. They did credit me for the $3 when I ordered a 3 pak of the tall one.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Haha YUP! yeah sorry sounds like they don't know what they are talking about
I ordered one of Yocan UNI Thick Oil VV Mini Mod yesterday. I received notice of mailing today. I need this. My life is going to change for the better. I'm going to lose weight and get a face-lift. I'll get the body of an athlete, but be forced to give it back. Somehow money will flow into my coffers. I'll finally find "True Love" and live happily ever after. Wish me luck!
I'm happy with UNI I got: not digital and only 3 heat settings. Being a Gadget Guy, sure, I miss not seeing actual temp, but I tend to be on the weak side of settings, anyway. I can't imagine using the highest setting, but we'll (the Imperial "We") have to see.
Thats the nice thing about the IMO Pro is you can set it lower than most of the other ones.
cybrguy
Putin is a War Criminal
I really like it. Comfortable to hold, quick to respond and surprisingly reasonable. I don't use it that much and usually only a hit or 2 or 3 at a time but I take it with out of the house when I can't easily do flower. I have it set at 275° for the LLR I have loaded.
I'll probably use it more after the local prices start to come down.
I'll probably use it more after the local prices start to come down.
The magnet attachments for the Yocan Hive, Hive II, and Flick work in my UNI, albeit a slightly shorter magnet. Of course, this means the small, one-coil tube for concentrates will work, too. I like the interoperability.
From L to R: one-coil concentrate tube- no magnet; empty oil tube w/magnet: two carts w/short and long magnet
From L to R: one-coil concentrate tube- no magnet; empty oil tube w/magnet: two carts w/short and long magnet
Last edited:
iammyself
Well-Known Member
Hey guys. I've been a medical patient in Florida for 2 years now. When I first got my card, they only allowed cartridge vaping. So I went to the dispensary, got my free battery, and spent the last 2 years paying WAY too much. When the pandemic lockdown started, my dosing went up, and I realized I needed to find a cheaper option. I started researching, found FC, and have spend the last couple months browsing. I got a Healthy Rips Fury Edge for flower (it has since become allowed in FL), and also started filling my own CCELL carts with distillate to help keep costs down.
I've been using the dispensary-provided battery, but realized after messing with the temperature settings on the Healthy Rips that I could be adjusting the experience with a more advanced battery as well. So I did some research looking for something basic, small, magnetic, with variable voltage, and settled on the Yocan Uni Pro. I got it from a local shop, and quickly realized when I started using it that I have no idea what voltage I should be using for my home-filled CCELL carts. I've experimented, and researched, and am confused by my results.
I first started at a low voltage of 2.4v with the CCELL reporting 1.6 ohms. The flavor was better than the battery I've been using, but after a few puffs it started tasting like I was getting dry hits. So I upped the voltage, assuming maybe 2.4v wasn't hot enough to warm the distillate to saturate the ceramic between puffs. I'm still trying different voltages out, but don't want to waste too much experimenting, and was hoping someone could help me answer a few questions.
1) What voltage range should I be trying out? The distillate is ~85% THC, so it's pretty viscous. The CCELLS ohm range seems to vary from 1.4-1.7. Which leads me to my next question;
2) Is it normal for my CCELL resistance to jump around like that? It'll change sometimes when I just pull it out and put it back in.
3) Anything else I should be aware of or know about if I'm new to filling my own carts?
Thanks in advance for the great advice I'm sure I'll receive after reading through the forums. I'll be back soon, I also have an EZ Sai coming in the mail tomorrow for other concentrates. Complete and total noob to that one. I've been researching how to use it, but I'm sure I'll have questions.
I've been using the dispensary-provided battery, but realized after messing with the temperature settings on the Healthy Rips that I could be adjusting the experience with a more advanced battery as well. So I did some research looking for something basic, small, magnetic, with variable voltage, and settled on the Yocan Uni Pro. I got it from a local shop, and quickly realized when I started using it that I have no idea what voltage I should be using for my home-filled CCELL carts. I've experimented, and researched, and am confused by my results.
I first started at a low voltage of 2.4v with the CCELL reporting 1.6 ohms. The flavor was better than the battery I've been using, but after a few puffs it started tasting like I was getting dry hits. So I upped the voltage, assuming maybe 2.4v wasn't hot enough to warm the distillate to saturate the ceramic between puffs. I'm still trying different voltages out, but don't want to waste too much experimenting, and was hoping someone could help me answer a few questions.
1) What voltage range should I be trying out? The distillate is ~85% THC, so it's pretty viscous. The CCELLS ohm range seems to vary from 1.4-1.7. Which leads me to my next question;
2) Is it normal for my CCELL resistance to jump around like that? It'll change sometimes when I just pull it out and put it back in.
3) Anything else I should be aware of or know about if I'm new to filling my own carts?
Thanks in advance for the great advice I'm sure I'll receive after reading through the forums. I'll be back soon, I also have an EZ Sai coming in the mail tomorrow for other concentrates. Complete and total noob to that one. I've been researching how to use it, but I'm sure I'll have questions.
PPN
Volute of Vapor
Hi, about your resistance jump... it's coming from a tiny film of dust/grease or anything else which didn't help for a clean contact, clean well (with a q-tip soaked in iso) the Uni Pro contact and, as well, the magnetic adapter top&bottom and the bottom of your cart, this will help for better readings but you can apply some pressure on your cart for a quick fix, this is might works.
I'm not myself using distillate since I live in a illegal country, here you can load only the concentrates you are making yourself, so I use mostly bho and, sometime, rosin. I usually need to add a few terpenes drops or Liquidizer to get it runny enough for a cart. I'm using it from 2.4v (for tastys hits) to 3.2v for thickers hits... and the pre heating feature for even tastier and smoother hits!
I'm not myself using distillate since I live in a illegal country, here you can load only the concentrates you are making yourself, so I use mostly bho and, sometime, rosin. I usually need to add a few terpenes drops or Liquidizer to get it runny enough for a cart. I'm using it from 2.4v (for tastys hits) to 3.2v for thickers hits... and the pre heating feature for even tastier and smoother hits!
As for ohm number issues, please make sure the adapter firmly connected , and also refer to @PPN 's suggestion too.
The low voltage set is recommend for newbies. If you want stronger hit, up the voltage.