Venty by Storz & Bickel
- Thread starter Jill NYC
- Start date
My Venty just gave up last night displaying the Error 04 
One thing I noticed over the last week or so is that the Venty made some (very quiet) ratting sound when I was drawing. At first I thought it might be the screen bending when I pull but then I realized it only occurs when the heater seems to be "adjusting", not during initial heat up though...
anybody else noticed that?
One thing I noticed over the last week or so is that the Venty made some (very quiet) ratting sound when I was drawing. At first I thought it might be the screen bending when I pull but then I realized it only occurs when the heater seems to be "adjusting", not during initial heat up though...
anybody else noticed that?
4-Aces King-High
Well-Known Member
Mine yesterday after charge code E04,performed 10 second reset,working. Last Venty had E04 then E05 would Not reset.My Venty just gave up last night displaying the Error 04
One thing I noticed over the last week or so is that the Venty made some (very quiet) ratting sound when I was drawing. At first I thought it might be the screen bending when I pull but then I realized it only occurs when the heater seems to be "adjusting", not during initial heat up though...
anybody else noticed that?
Fingers crossed and Further testing/ Medicating to ensure reliability. Hold power button 10 plus seconds to Reset,Good Luck
Vyrus
B2, Venty, Dynavap, Volcano, XMAX V3, RBT Splinter
Touch wood, but I've not had any issues with my Venty, ordered early January.
Using a 10mm ID, 14mm OD, silicone whip that I'd normally use for the Volcano. Took a bit of work with the help of some pliers to make the whip a little more malleable but works perfectly now.
Since doing this I've not used my Venty in any other way, completely open paired with a small glass piece.
Using a 10mm ID, 14mm OD, silicone whip that I'd normally use for the Volcano. Took a bit of work with the help of some pliers to make the whip a little more malleable but works perfectly now.
Since doing this I've not used my Venty in any other way, completely open paired with a small glass piece.
Just an email from SnB ,i asked about this
iam an 1.05 and no updates but this has fixed the no vibration at end of superboost it now does ,
flow sensor. Is more sensitive so no more pressing buttons to keep it on ,a sips enough i had in on for more than half an hour only pressing the up and down to change temps ,makes everything seem less rushed ,big difference
SnB say that a 1.06 version is coming ,they didnt say exactly but no point trying updates until it does as at the moment you cant but when 1.06 comes you will be able too update from then on
G
Interesting! Haven't done it, but seems like it might restrict the airflow too much?
Mndeadhead
Well-Known Member
i actually bought a cooling stem from Sneaky Pete. Has beads in it already. I get tired of the screen in the cooling unit getting crammed out when my wife overfills it...this seems to help, and it cools quite well
Yeah-- I feel like there are plenty of additional cooling options for once the vapor leaves the Venty unit, so may not be worth messing with the air path internally before that point.
Also, I think a lot of people do this already-- but definitely change the top screen to the same fine mesh that the bottom one has. Less particles make it into the unit, and it's WAY easier to clean.
Mndeadhead
Well-Known Member
the real question for you is...are you Axilla Part 1 or Part 2???
4-Aces King-High
Well-Known Member
Thanks for the idea
i just put beads in my Venty cu,no difference if there is it is slight
I agree it seems to cool,further testing. I used 2 & 3mm,Ruby, & zirconia . Not sure how many but will count when cleaning the CU.I also left the rectangular screen in.
When I applied for an AOL screen name approx 50 years ago, axilla1 was taken-- and there was no way I was going to rep axilla2 hahahaha
SockPuppetTheatrics
Well-Known Member
La mixette — Foody Fuego
WHAT IS LA MIXETTE? La Mixette is the finest rolling accessory imported from the south of France. Perfect for your at home set up or on the go, the simple but elegant design of a soft leather cup with vegetable tanning makes it easy to mix all kinds of smoking plants in the palm of your hand. I
www.foodyfuego.com
jbm
Not a Vapman “beta tester”
Thanks! Ordered one of each size.La mixette — Foody Fuego
WHAT IS LA MIXETTE? La Mixette is the finest rolling accessory imported from the south of France. Perfect for your at home set up or on the go, the simple but elegant design of a soft leather cup with vegetable tanning makes it easy to mix all kinds of smoking plants in the palm of your hand. I
JoeMama
Well-Known Member
Ditto... even at 210 I have no real need to cool down the vapor. I've used this about 10 times a day since I bought it, and I have only good feedback on it. I hope that's not anomalous and that it's the experience of most users.
Last edited:
Pimpslapper
Well-Known Member
Got my Venty out for delivery tomorrow! Platinum capsules as well that were posted on this thread from a Berlin headship. I finally live in a country where weed will be legal. Go Germany!
RustyOldNail
SEARCH for the treasure...
You mean “titanium”?
BabyFacedFinster
Anything worth doing, is worth overdoing.
Great to see a review from Bud. A blast from the past!
RustyOldNail
SEARCH for the treasure...
I watched the video, and while I know he said he only used it a few days,…
The S&B “Filling Aid”, is listed in the S&B Venty accessory page, but out of stock.
I totally disagree with his opinion on the variable airflow. Loved that in my first session….
The S&B “Filling Aid”, is listed in the S&B Venty accessory page, but out of stock.
I totally disagree with his opinion on the variable airflow. Loved that in my first session….
vapviking
Old & In the Way
I will hold off, and wait for the unobtainium caps to come out
Pimpslapper
Well-Known Member
LOL yes! Them would be some expensive caps!. I thought that didn’t seem right when I wrote that. Well UPS showed up today but he couldnt find the package in the truck so hopefully will get it tomorrow lol…
SockPuppetTheatrics
Well-Known Member
Really enjoying the Venty a couple of weeks into owning one, but I wanted to ask: has anybody in the US managed to find a decent solution for reducing the capacity of dosing capsules? Shipping for these to the US is $50-something, and I think the glass chamber reducers from POTV don't fit inside the capsules (just inside the chamber). The closest I've found are these, but the largest diameter ones are still a little small for the S&B capsules.
Vyrus
B2, Venty, Dynavap, Volcano, XMAX V3, RBT Splinter
Have you got a basket screen lying around (thinking like the rimmed ones for the Arizer Solo/Air)? That could work as an alternative to the dosing capsule for microdosing