Discontinued Vapor Blunt

THCMuscle

Well-Known Member
That was the ABV from about 5 min on standard and 5 min on boost, till there was no vapor left.

Last night from a full charge I got about 3 20min cycles. I kept pushing the button to keep it on. TheRealVaporBlunt stated that it takes much more energy to heat up the unit than keep it at working temp. Makes sense. They claim 120min continuous use on one charge. I have noticed that my unit charges really fast. About an hour and a half from the low bat red flashing button.
 
THCMuscle,

steiner666

Serial vapist
Do you (or anyone for that matter) know if the unit can be used AC-mode with the included charger, or will it be like the solo and require a separate cable for AC powered use? Or maybe it won't have AC use at all... that would really suck imo.
 
steiner666,

TherealVaporblunt

Well-Known Member
Manufacturer
I am obviously biased, but that video is pretty incredible. That's what I ment by "bounce back". He hit that thing about 6 times in a row without a break. Honest opinions guys, which other vapes produce clouds like that?
 
TherealVaporblunt,

paytonpenn

Level 30 Nature/Healer
Looks really promising, I can't wait to see what you have in store for the future. Any ideas toward implementing this in with water in the future?

If not I'm sure someone will make a mod one day.
 
paytonpenn,

vape4health

Well-Known Member
Clouds, watch that video of a solo white walling a bong with a huge hit. The video from THC makes me wounder if the vaporblunt can give a long full hit, maybe it is wasting vapor but I like a huge full lung hit now and then.
 
vape4health,

OhTheAgony

here for the chicks
Dildovape, I laughed so hard my I made my cat jump up :lol:

Make that anal lube and your definitely safe :D

Sorry for the offtopic, I just had to.

A little more serious, have you considered a waterpipe adapter style mouthpiece yet VaporBluntguy?
 
OhTheAgony,
take off the mouth piece and drop that sucker in a bong. Lets see heat retention! Sweet video regardless this thing looks cool, but a little mis-directed due to its size and the fact it says BLUNT on the side.


On a side note I question the durability of the silicone on the inside over a very long period of use. I love the stiry thing though; very innovative.
 
biojuggernaut,
Hey, good to see dog will hunt, looks like some very respectable little vapor clouds.

Jesus Christ guys, sometimes a cigar is just a cigar. It doesn't look much like anything embarrassing or humorous when Muscle is hitting it in the videos.

I'd also love to see it through a waterpipe.
 
charliedontsurf,

vape4life

Banned for life
Huge props to making an appearance and supporting your product. You're wise, you can also quell rumours real quick.

Question regarding cleaning the silicon tube that runs through...

Can it be replaced? I always used iso to clean my whip tubing, and it still always stained yellow at the end. Also the taste would be affected so eventually would have to be replaced. I'm just curious how "clean" this blunt will be with time?

thanks again, looks really great!

Thanks THCmuscle for the most awesome review!!
 
vape4life,

TherealVaporblunt

Well-Known Member
Manufacturer
We haven't came to an agreement on all the details, but we are going to offer amazing customer service. Opening your vaporblunt voids your warranty, but we are going to offer a maintenance plan of some sort where u can send it in and have the silicone replaced or whatever needs to be done by our engineers. I also am trying to figure out what to do with refurbished units, The best idea I've come up with is to offer refurbished units to existing vaporblunt customers at a discounted rate (maybe 35 percent off?) but I'd like some feedback from you guys? In our warranty if you return the vape for a warranty covered reason we send you a brand new unit, so it is the returned units (they will be fixed and like brand new) that I am trying to figure out what to do with. Hopefully we just never get a return!!!
 
TherealVaporblunt,

Gonzo

Slightly Stoopid
What will be the best way to remove gunk from the silicone to make it safe for shipping back to you guys? Really like the look of this unit and thinking of purchasing one as an early Xmas present.
 
Gonzo,

TherealVaporblunt

Well-Known Member
Manufacturer
I used a bristled pipecleaner with a little rubbing alcohol to clean the silicone on the first prototype I ever had, I'd say I vapid about 100 bowls in it, and then I took the unit apart. The silicone had a yellow tint, but no vapor goo was present. Down side was it tasted like alcohol for a use or two. Overall I thought it was pretty clean for being used that much, bit I have no other unit to compare it to
 
TherealVaporblunt,

dorkus_molorkus

Well-Known Member
great looking product, really cool you are here to back it up as well.

For me to pull the trigger on the vaporblunt it would have to be a better vape than this......


I own a HA2.1 & a DBV, and IMO neither of these can hit like the solo & conserve your weed too.

Cant wait for some reviews & some more vids of a vaporblunt getting a workout on a waterpipe.
 
dorkus_molorkus,

THCMuscle

Well-Known Member
I am not very impressed by the vaporblunts efficiency. I get far larger, tastier and high-achieving hits from my MFLB than the vaporblunt. I have used a frightening amount of herb trying to get the high and hits I want. The vaporblunt is great for repeated hitting like a cigarette, and with a decent .2-.4g bowl you can get a few people very ripped, though to properly kill the chamber I'd run it for 2 cycles. For 1 person on-the-go efficiency and speed is not the vaporblunts strong point.
 
THCMuscle,

TherealVaporblunt

Well-Known Member
Manufacturer
Hi Thcmuscles,

Can you clarify that a little for me please? If 1 bowl can get 2-3 people ripped why wouldn't it be good for 1 person? Because your going through too much herbs?
 
TherealVaporblunt,

paytonpenn

Level 30 Nature/Healer
If 2-3 people are able to get ripped then most likely they are average tokers and have a moderate-low tolerance (more leaning towards low). And as it sounds if you are using a lot of herb like it suggest you could, you would be wasting for more than you really need too. It may take me up to 4 bowls for me to get a high that doesn't feel like I'm still sober.

I don't know how the VaporBlunt would be with that because I have never used it, but with my VaporGenie I load small bowls because loading a bigger bowl doesn't help me save my weed and vapes through it quickly not getting me at a high that one would imagine me to be considered being at from such big bowls.. (If that makes sense)
 
paytonpenn,

THCMuscle

Well-Known Member
I find that it needs a large bowl to produce satisfying vapor. I also have found it takes a while to properly vape the herb to proper looking ABV, mostly in part because the slow draw required.


It's great for very small hits, like a joint or cig. I'm talking many in a minute, but the hits aren't huge. It takes a longer time to medicate than my no2 did, that would go through bowls rather fast.

I compared a typical MFLB trench amount, both in an MFLB and in the vaporblunt. I felt more effect and got better vapor off the MFLB using this small amount. Though yes the vaporblunt can produce better clouds than an MFLB when packed full.
 
THCMuscle,

TherealVaporblunt

Well-Known Member
Manufacturer
Understood. Have you tried a very small amount (about a third full) on turbo? I was experimenting with that last night and found it satisfying. It was after I went to saturday night dinner and had about 10 shots of vodka so I could have gotten baked by smoking ashes :lol:
 
TherealVaporblunt,

THCMuscle

Well-Known Member
I should really take a tbreak before I fully assess the efficiency of this thing. My tolerance is at the moon right now. I did notice it getting my quite high, the only area it's been lacking in sometimes has been vapor production. I'm working on techniques. My favorite so far is identical to what I do with my MFLB, I inhale slowly through my mouth and nose at the same time. It seems good at producing moderate vapor for a long time instead of excellent vapor for a short time.
 
THCMuscle,

THCMuscle

Well-Known Member
Last sesh with vaporblunt: satisfied :)

Hands down the best way to hit the vaporblunt is using the MFLB style technique described above. Seal mouth on the tip, keep your throat open, and inhale through your nose. This will lick vapor out of the vaporblunt into your mouth. I got quite a few lung-stinging hits off a lightly topped chamber, and decent visible vapor. Most importantly I got very vaked. It's all about technique with this vape.

I would say this vapes strongest points are durability and capacity. This vape has essential no parts, it is just one tube with a tip. You don't need to put on a tube (iolite,no2), insert a glass tube (solo) or carry external batteries (mflb). I'm sure this thing could be dropped repeatedly and continue to work fine, at least it seems like it. Capacity this thing can hold a ton. You could easily stretch a whole chamber to 2 large solo sessions, or you could get a group (3-5) of people high on 1. The hit method can be easily described, and aside from that it's very user friendly. Heat up time is quicker than the no2 on battery. Still no chime on if it can be used while powered by the charger?
 
THCMuscle,

vape4life

Banned for life
Why would existing customers want a refurb? i suppose as a backup...not a bad idea. I still am not a fan of the silicon in the vapor path, especially if it needs to be sent in to be replaced. That yellow tint does affect the taste for some purists. Are you considering an all glass path for your next vape?


TherealVaporblunt said:
We haven't came to an agreement on all the details, but we are going to offer amazing customer service. Opening your vaporblunt voids your warranty, but we are going to offer a maintenance plan of some sort where u can send it in and have the silicone replaced or whatever needs to be done by our engineers. I also am trying to figure out what to do with refurbished units, The best idea I've come up with is to offer refurbished units to existing vaporblunt customers at a discounted rate (maybe 35 percent off?) but I'd like some feedback from you guys? In our warranty if you return the vape for a warranty covered reason we send you a brand new unit, so it is the returned units (they will be fixed and like brand new) that I am trying to figure out what to do with. Hopefully we just never get a return!!!
 
vape4life,

THCMuscle

Well-Known Member
I am getting high every time I used the vaporblunt, but I am continually disapointed by its Vapor cloud production. To get a cloud I like I need to use about 3x the herb I want to actually consume or use. I am wondering if there is a possibility I have a cold or perhaps beta unit? The clouds that Vapornation described do not meet my experience, and I used about 5 grams trying.

I would like to compare it to the no2 because that was my last portable, and I loved it. The vaporblunts closest cousin in design and intended use is also the No2.


Vaporblunt's Pros & Cons VS Vapir No2



Pros:

Large bowl size (1/3 bigger than no2?)
Faster charge time (I am seeing about an hour and a half from dead)
Flavored tips (if you're into them)
1 piece
Faster heat time
Stirable bowl
Easier to load and dump



Cons:

Not as efficent
Significantly less vapor on all chamber sizes
2 temps vs unlimited (within normal vaping temperatures)
Not as easily removed battery
No car charger




Bottom line, I like the No2 better. It requires almost no learning curve, produces FAR bigger clouds and all vapor path parts can be seen and cleaned and replaced. And from a buyers standpoint its $100 cheaper.
 
THCMuscle,
Top Bottom