Vapman

[vapman]

Well @vapman it may not be new but it would be something nice to see and i am sure i am not the only one that would enjoy it.

Ok, thanks for you interest. This is actually the vapman thread, I hope the staff won`t mind showing something else than vapman. As you know I am the manufacturer and have to follow different rules than members.

Hi vapman have you ever considered glass parts for the vapman,
I've been using glass pipit(eye dropper) tubes for a mouth piece
Inverted in a small bubbler you can see the small cloud shoot through
It's very satisfying to get a visual without having to xhail the goodness.
..?perhaps a glass mid section is possible .As the name was previously questioned how bout VAPOPE as this seems to be a religious experience.
thanks man keep it simple.

Thanks for the applause! Keeping it simple is my goal at all times. Simple desn`t mean easy, often a complicated path has to be taken to find the simple way in the end. Glass is not ideal on vapman,
it conducts heat and vapman is small, meaning that one would burn himself badly when touching the middle section made of glass. At the very most we could make mouthpieces of glass but it would be far more expensive than plastic or wood because of the cone which has to be grinded with a diamond wheel.
This might be a stupid question but I never heard of VAPOPE, what is this?

vapman

 

[J-Kill9109]

At the very most we could make mouthpieces of glass but it would be far more expensive than plastic or wood because of the cone which has to be grinded with a diamond wheel.

Have you considered doing something acrylic like MFLB ships stock? A little tougher than glass, I don't know how that would factor into manufacturing but I enjoyed my acrylic for the MFLB.

 

[M0J0]

These tricks are very cool. I wish we could get vapor as thick as the E-Cig guys get.

@vapman - The shot glass trick you were talking about... Is it what the guy does in this video with the bigger glass?

Try to look past the cleavage

 

[hoyo77]

These tricks are very cool. I wish we could get vapor as thick as the E-Cig guys get.

@vapman - The shot glass trick you were talking about... Is it what the guy does in this video with the bigger glass?

Try to look past the cleavage

But I like the cleavage!!!

 

[RUDE BOY]

But I like the cleavage!!!

I agree. It's what Made the video really worth watching.

 

[VAPEHUNTER]

I'm so impatient ugh, I got word that Ashley and cinnamon are on there way home to me. Well Ashley Is gonna vist my brother @VAPEHUNTER she's on her way to you as we speak.

And for once US postal service is ahead of schedule. Instead of delivery tomorrow as originally expected, Ashley is already out for delivery. @$unnyblaq I'll get Ashley scorched and back to you to enjoy A.S.A.P.
Happy Vaping!

 

[M0J0]

I agree. It's what Made the video really worth watching.

But I like the cleavage!!!

It is a nice cleavage, but if you focus on it too much, you miss the tricks.

 

[hoyo77]

It is a nice cleavage, but if you focus on it too much, you miss the tricks.

Oh there were tricks in the video???? Damn now i got to watch it again!!!!

 

[Barbertov]

Great cleavage

 

[kahlilhc]

But I like the cleavage!!!

I agree. It's what Made the video really worth watching.

It is a nice cleavage, but if you focus on it too much, you miss the tricks.

Oh there were tricks in the video???? Damn now i got to watch it again!!!!

Great cleavage

Not trying to moderate
But this is the Vapman thread guys!......Just playing, I've always wanted to 'Re-Rail' an OT thread, so all nice cleavage aside.......



......
..Vapman walnut basic on a recent trip to Ibiza......
.....aaaannnd...Thread restored!

 

[J-Kill9109]

These tricks are very cool. I wish we could get vapor as thick as the E-Cig guys get.

@vapman - The shot glass trick you were talking about... Is it what the guy does in this video with the bigger glass?

Try to look past the cleavage

The shot glass thing he is talking about, if I had to take an educated guess is his desktop version in action. The herb chamber kind of resembles a shot glass with a down stem, and when vapor becomes active you can see it swirl around above the herb, it is something that not many vaporizers can show you. I would not know what he was talking about if I did not have the Aromed which is essentially a more technologically advanced version of the Vapman desktop (I have not seen a formal name for it). I could be wrong but I would be nearly willing to bet on it.

 

[Stu]

Not trying to moderate
But this is the Vapman thread guys!......Just playing, I've always wanted to 'Re-Rail' an OT thread, so all nice cleavageaside.......

I saw the derail and am guilty of letting it continue. But my excuse is that cleavage is my kryptonite and am unable to moderate cleavage related posts. I have to recuse myself and let @momofthegoons do that type of dirty work!

 

[hoyo77]

Apologies for derailing this post again...but i kinda want that desktop model!!!!

to avoid double posting...i am also enjoying pushing my vapman to the limit with the torch. getting my ABV to a dark coffee brown, also noticing that certain strains seem to last a little longer in the vapman as well..anyone else notice this??

 

[OF]

As long as we're talking off topic guys......we are blessed to have women amongst us.......

OF

 

[$unnyblaq]

@VAPEHUNTER i can't wait I know it will be gorgeous

 

[axakal]

i don't remember who mentioned the vapor signature phenomenon on this thread, but from my limited observation so far, the high seems to be different, although i don't know, how to describe it properly. it may be subjective, but an mflb high gets me more into a "thinking mode", whereas the vapman triggers the good mood and silly jokes stronger. again, there are maybe just nuances, that are difficult to put in words, but there is a difference to notice.
my tolerance is pretty low, but i seem to need 4-5 loads to get really high. and then still i'm less high, than usually. but i was too lazy for a sixth. i also try to keep count of the number of loads i can get out of a gramm. just for statistical purposes. so far i still can't consistently pull something even remotely resembling the whispy clouds from the mflb, although the abv is a lot darker. i heat up for 5 sec, 2 sec break, 5 sec reheat, pull. i get 2-3 hits from a load. the flame length is about the length of the wooden part of mouth piece in total, with the brightly colored visible part being around 1cm. i'm using the vapman deluxe torch.
how many sessions does it actually take, until the vapman is "worked in" and stops smoking while heating? i've used it every night since last saturday and it still smokes, what probably still affects the taste somehow.

 

[J-Kill9109]

i don't remember who mentioned the vapor signature phenomenon on this thread, but from my limited observation so far, the high seems to be different, although i don't know, how to describe it properly. it may be subjective, but an mflb high gets me more into a "thinking mode", whereas the vapman triggers the good mood and silly jokes stronger. again, there are maybe just nuances, that are difficult to put in words, but there is a difference to notice.
my tolerance is pretty low, but i seem to need 4-5 loads to get really high. and then still i'm less high, than usually. but i was too lazy for a sixth. i also try to keep count of the number of loads i can get out of a gramm. just for statistical purposes. so far i still can't consistently pull something even remotely resembling the whispy clouds from the mflb, although the abv is a lot darker. i heat up for 5 sec, 2 sec break, 5 sec reheat, pull. i get 2-3 hits from a load. the flame length is about the length of the wooden part of mouth piece in total, with the brightly colored visible part being around 1cm. i'm using the vapman deluxe torch.
how many sessions does it actually take, until the vapman is "worked in" and stops smoking while heating? i've used it every night since last saturday and it still smokes, what probably still affects the taste somehow.

I believe the difference in effects you feel is the complete range vaporization your Vapman does on such small loads. I stated earlier that for this reason it replaced joints for me. I'd say if you go easy in the first hit and consider it a heat up hit then your taste will improve. Babying a bowl has always been better taste to me. I can't tell you about the worked in part I feel as my Vapman performs the same as it always has careful aiming solved the smoking thing for me but, I also own the classic. Perhaps that might be a persons getting more comfortable with the vape? I'd say after 20 sessions you will have already had quite a few thoughts about ways you can improve or experiment with it.

 

[M0J0]

i don't remember who mentioned the vapor signature phenomenon on this thread, but from my limited observation so far, the high seems to be different, although i don't know, how to describe it properly. it may be subjective, but an mflb high gets me more into a "thinking mode", whereas the vapman triggers the good mood and silly jokes stronger. again, there are maybe just nuances, that are difficult to put in words, but there is a difference to notice.
my tolerance is pretty low, but i seem to need 4-5 loads to get really high. and then still i'm less high, than usually. but i was too lazy for a sixth. i also try to keep count of the number of loads i can get out of a gramm. just for statistical purposes. so far i still can't consistently pull something even remotely resembling the whispy clouds from the mflb, although the abv is a lot darker. i heat up for 5 sec, 2 sec break, 5 sec reheat, pull. i get 2-3 hits from a load. the flame length is about the length of the wooden part of mouth piece in total, with the brightly colored visible part being around 1cm. i'm using the vapman deluxe torch.
how many sessions does it actually take, until the vapman is "worked in" and stops smoking while heating? i've used it every night since last saturday and it still smokes, what probably still affects the taste somehow.

I didn't get almost any visible vapor at first. Then I heeded OF's advice and stopped being shy with the heat - which changed everything for me.

At first I combust a few times because of this, but I realized just how shy I had been before.

Fast forward about a month from that time and I was consistently getting very big clouds.

It's been many moons since then and now it's all second nature to the point where if I'm sharing my bowl with my wife I can get a big cloud for me and a almost no vapor for her (so she doesn't cough).

I get big clouds and she gets none

I can do this sharing the Vapman one hit for me, one for her, one for me... and I am controlling the temp each time - hot for me, cooler for her, hot for me, cooler for her... etc...

The awesome thing about the Vapman is that with time, it all becomes second nature and you don't really think about it. Seren has mentioned this as well...

So my advice is to lengthen the flame a bit to make it hotter, and at first, count one Mississippi, two Mississippi, three Mississippi etc. This will keep your timing constant enough to repeat results.

As Master Of always says: Don't be shy with the flame. - I just saved Of some keystrokes there.

Hope this helps.

 

[u bwade wunner]

I'm quite interested in different members methods of heating the Vapman..amount of heat ,length of flame etc.

I always used to heat mine for 4 seconds wait one then heat for 4 again..hit then heat for 4 and hit and repeat until it's time for cache.recently I think @KidFated. was heating his for 6 seconds initially..made me think..hmmmm. So I'm experimenting and keen to hear different methods/ results.

You can definitely toast your tonsils if you heat the Vapman too much or draw too quickly sometimes..I'm a fan of hot vapor though.the PN water tool is awesome with the Vapman for a change.

 

[OF]

I'm quite interested in different members methods of heating the Vapman..amount of heat ,length of flame etc.

I think flame size is a very critical factor, often overlooked. Even a small change in size can be a second or more change (out of say 4 or 5). I use the mouth of the VM as a gauge (since it's always handy) and check to see if the tip of the outer (lighter) cone reaches the far side from time to time.

Then it's a 'fast 5 count' with a pause and usually another 4 (which I adjust hit to hit). After a bit you can 'do it by feel' I think.

I try to keep the tip on the bottom of the pan, but more it in small circles for even heating.

I'm sure there's a bunch of other ways, but that's mine and you asked.......

OF

 

[u bwade wunner]

Thanks OF..I've been using a flame where the inner blue of the flame is somewhere between 3/8 and I/2 inch.

If the flame becomes larger after say,a gas refill and I don't want to adjust the flame, I pull the flame away from the Vapman slightly to counteract too much heat hitting the pan.

A little lazy I know(what are weekends for!)

I like the honest lotus torch or similar with the easy adjust for your flame.other wise I use the end of my LED tweezers to adjust the old slot type valves.

If you don't already own a pair.try them out.very practical for looking perfectly into recessed vape bowls.


Thanks I will try You're method out later today

anyone else?

 

[M0J0]

I think flame size is a very critical factor, often overlooked. Even a small change in size can be a second or more change (out of say 4 or 5).

OF

That's a great point, OF. I have noticed that before and didn't remember until you mentioned it.

One time, I increased the size of my flame just a tad and combust twice in a row.

The flame increase shaved off at least a full second off my heating time and that took me by surprise.

I also move the flame in small circles around the tip of the Bowl.

 

[VAPEHUNTER]

the PN water tool is awesome with the Vapman for a change.

I agree. And I was really sad after I broke my PN water tool but than I replaced it with the "Simba Glass" matrix water tool and never looked back.

@VAPEHUNTER i can't wait I know it will be gorgeous

Yes it will! I was hoping to get her done today at work but I got really busy and only got as far as disassembly and sanded. Here are some pics of my progress.

Here Ashley is chilling with her distant cousin.

The screen comes right off with the screws but the pegs need to be removed with a vise.

When I take something apart I like to put it back together the way I originally got it. So I always make a "dummy" to hold my pins, screws, etc. I made these "dummies" with cardboard and masking tape.

Middle section "dummy"

Body "dummy"

Ashley ready for her date with the torch

 

[$unnyblaq]

@VAPEHUNTER Ash looks like she's in good hands . I can really see this as my stealth unit the one I take about town. I'm am eager to see how dark she becomes . Great pics by the way I love to see the before and after.

 

[J-Kill9109]

Thanks OF..I've been using a flame where the inner blue of the flame is somewhere between 3/8 and I/2 inch.

If the flame becomes larger after say,a gas refill and I don't want to adjust the flame, I pull the flame away from the Vapman slightly to counteract too much heat hitting the pan.

A little lazy I know(what are weekends for!)

I like the honest lotus torch or similar with the easy adjust for your flame.other wise I use the end of my LED tweezers to adjust the old slot type valves.

If you don't already own a pair.try them out.very practical for looking perfectly into recessed vape bowls.


Thanks I will try You're method out later today

anyone else?

I can give you a kind of sort of for me because I change my technique depending on desired effects. Essentially I like to take a slow and steady approach with my Vapman so I don't find myself flashing the bowl. I heat the cone at its tip for 5 seconds, wait 5 for heat dissipation, heat 5, look for visible vapor forming in stem (if yes, hit slowly for 7-8 seconds, if no do short bursts of 1-2 seconds till you see visible vapor) I heat this way so I get even vaporization and have a better chance of only getting vapor. I must emphasize that the most important part of this method is pausing 5 seconds for heat dissipation it gets the top of the herb as well as the bottom. Many have said the Vapman is purely a conduction vape, the small holes in the bottom being heated as well as the air passing through to the hot brass bowl cause convection and that's why our nifty friend requires no stirring. Every once in a while I find a quick poke to break up your herb after a couple hits is beneficial for really milking your herb for its last drop of vapor goodness. Sorry so long, hope it helps! If like to hear other people's methods as well as I feel like it took me quite a while to really "get it" with this vape.