Vapman

nicknobody

Well-Known Member
Looks good to me. That olive might have been in a kit originally but it kind of reminds me of the customs they were naming a while back.

I think it is olive. The never made apple mouthpieces that I know of. It almost looks like the pear mouthpiece in your photos, but I'm still going to say olive.
Thank you for the fast reply!

Check the last photo i edited in if u don’t mind. I believe the mid sections/mp were swapped?
 
nicknobody,
  • Like
Reactions: farf

Spy Car

Well-Known Member
Despite the heads up from a certain staff member, I added an olive wood stem to my recent 2.0 base order (with steel) because it is romantic and cute and woodsy.

Not pleasant to use.

I could have listened. I could have. I did not.

No one to blame but myself. LOL

I will share a "stoned" insight into Old Bill. The was a fleeting moment--really it was a flash--when I heard the new Clicks (or whatever the fuck they are called) were coming out as I'd just purchased my 2.0, and I felt a moment of regret. Like if I'd waited a couple weeks I could have

When, snap, I was so out of that mode---as I, a virtually brand new Vapmanist, junior to nearly all, am now a "pre-Clickist."

I can own that cred forever.

Priceless! LOL

Bill
 

Arawfish

How many vaps could a Vapman vap…
Before and after 7 hits at #4 on the Olive station (the first 3 with two or three extra seconds after the click):
IMG-0931.jpg
IMG-0945.jpg



The Italian V1 midsections fit the Click, so yes. The V1 mouthpieces fit the V2 midsection, but they don't 'work' because they aren't deep enough to close off the slot, with the exception of the glass WPA--that does work by closing off the slot.
IMG-0949.jpg


Edit: I just tried the adjustable POM V1 mouthpiece in the V2 midsection and it may work on yours. On some it feels like it bottoms out on the metal filter before it can get a good grip. Works better if it's gooey, though. ; )
IMG-0955.jpg
Mr. Breeze how do you keep your midsection so damn clean? Mine looks like it went through the fires of Mt. Doom. I know we’ve had the click for roughly the same amount of time and yet mine is bleeding through the wood over half way up the midsection 🙃


That’s not a complaint on my end though, I happen to love when something shows its use. I do find it interesting that even with the metal liner there’s still a decent amount of bleed-through, even more so than my og Swiss models that I’ve had for years. I suspect it’s because Cherry is less dense than the other woods I have.
 

coolbreeze

Well-Known Member
So more like this configuration.





Unless weights are posted somewhere I’m not sure how to tell if one is ti or inox..
I'm not sure but I think Stainless looks whiter, Ti looks grayer. But in this case it would be an AFC, so it will be longer, have slots, etc. They also made a set of Ti AFC MPs that were tinted different colors, including the gold one.
Mr. Breeze how do you keep your midsection so damn clean? Mine looks like it went through the fires of Mt. Doom. I know we’ve had the click for roughly the same amount of time and yet mine is bleeding through the wood over half way up the midsection 🙃
Lol. You must get better weed!

That’s not a complaint on my end though, I happen to love when something shows its use. I do find it interesting that even with the metal liner there’s still a decent amount of bleed-through, even more so than my og Swiss models that I’ve had for years. I suspect it’s because Cherry is less dense than the other woods I have.
 

Hagbard

How Soon Is Now?
So more like this configuration.
apple looks gorgeous and correct. i am not sure (and almost confident) that its not an olive midsection you got there. looks like a pear midsection on an olive vapman. but i could be wrong. nonetheless the much more beautiful piece is genuine to me :) congrats!

Mr. Breeze how do you keep your midsection so damn clean? Mine looks like it went through the fires of Mt. Doom. I know we’ve had the click for roughly the same amount of time and yet mine is bleeding through the wood over half way up the midsection 🙃
acetone bath works wonders. it will look pristine again.
 
Last edited:

Bolano

Well-Known Member
I know everyone is waiting for the click version to go on sale but there is a great deal on nowinhale at the moment. A lotus and vapman 2.0, €199 for both. It's for one day only but that's a serious offer.
Edit: I should add that price is with the 30% Black Friday discount. The bundle is priced at €280

😮
 
Last edited:

jbm

Well-Known Member
Any reason for US customers to not buy from @VGOODIEZ ? I assume that the 30% BF sale on the Inhale site won’t apply to the click.
 
jbm,

Radwin Bodnic

Well-Known Member
If you have a grinder with a magnetic center post, be aware that the vapman click discs are magnetic and the new pan has a flat bottom. So you can just stick your vapman on the center post and fill over it. No need for the funnel anymore !

Every bit that don't go in the pan will get back to the grinder. :tup:

foto-no-exif-6.jpg


Cheers

Edit : I'm realizing that's not something I'd do with a classic version. The pure seems more suited...
 
Last edited:

Electrofever

Well-Known Member
If you have a grinder with a magnetic center post, be aware that the vapman click discs are magnetic and the new pan has a flat bottom. So you can just stick your vapman on the center post and fill over it. No need for the funnel anymore !

Every bit that don't go in the pan will get back to the grinder. :tup:

foto-no-exif-6.jpg


Cheers

Edit : I'm realizing that's not something I'd do with a classic version. The pure seems more suited...
What is that grinder ? Seems quite large, knowing the size of the VM. And, btw, lovely flower 😎
 
Electrofever,
  • Like
Reactions: coolbreeze

farf

Smells like popcorn
Microdoser meets macrodoser.

Happy to report that the new click has solid function with the station (not pictured; this is a Swiss made hornbeam). Does not activate the indicator lights but it will receive heat from a properly functioning station and the clicks will be an auditory indicator even if the lights do not work.

It also requires a *little* more fidgeting to properly seat onto the post but I've found no issues so far. Some people with dexterity problems could find it more challenging, though.

 

Gourmet

Well-Known Member

Sneakypete live right now on the Click!
Man, this guy is an endless babbler, you could run windmills with! :D

But obviously his community really likes it. :tup:


The effect could be enhanced even more if he inhaled more deeply and kept the vapor longer.
But that's how many people feel, the clouds are more important than the efficiency.

This is another example of the logical decision to offer something for steam locomotive enthusiasts. :sherlock:
:lol:
 

Kozzmozz

Infinite realities, infinite possibilities
Received my first station after owning and collecting 5 vapmen for a period of more than 10 years. It’s my main vape.

I’m in love.

Very tastefull
sessions are stretched
Ease of use
Beautiful to look at
Build quality great
I feel it can even better microdose


A lot, or even everything has already been written here, but I guess it’s something you have to experience to fully appreciate.

I was always hesitant since I vape more often outside.

But I could not resist the current sale. Got a factory second and cannot find a flaw besides the somewhat rough or better said not super smooth dial. But its minor.

Keep it up Michael and David! Loving the mix of keeping great vapes in the market and simultaneously innovating.
 

RedZep

Well-Known Member
With the Vapman click, if it easy to gauge re heats by drawing on the device as you are heating?

I don't think I would enjoy waiting for cool down clicks.
 
RedZep,
Top Bottom