MGG
Well-Known Member
So if I get uneven extraction and burnt material my glass path is surely broken
What temp are you on? Definitely shouldn't be burning lol.
Discontinued VapeXhale Cloud
- Thread starter stonemonkey55
- Start date
-
- Tags
- water filtered
What temp are you on? Definitely shouldn't be burning lol.
justcametomind
Well-Known Member
Just 1 o'clock!
MGG
Well-Known Member
Yeah shouldn't be burning lol, so your abv comes out black and you taste smoke?
sounds broke to me =[! I doubt it's under warranty anymore so if i was you i'd suggest just using a lower temp for the time being, maybe your cloud just runs a little too hot?
Just some guy13
Active Member
Much to my dismay, tragedy has befallen me. Last night while cleaning up my coffee table, I accidently knocked my turbine ht over and broke the arm off it. I'm absolutely devastated right now. I don't have the funds right now to buy a new ht but my birthday is in a little over a month. My question to you fellow members is what to do now? Do I check with a glass blower and see if it can be repaired? Its only the arm that is broken where it attaches to the cylindrical part of the ht. I was still able to use my ht by simply putting my mouth over the newly exposed hole in the ht (where the arm used to connect) and it work just like before it was broken. Do i just buy a simple bong as the best low cost replacement for a hydratube? I believe 18 mm bong pair with the EVO, correct? Any advice would be greatly appreciated in such dire times.
Seek
Apprentice Daydreamer
Condolences, glasss breakage is always sad.
I think you could get it repaired for under 100$. If you tell what continent you live on, then probably someone could give you a contact for such glassblower in pm.
I broke a joint on a Vertigo hydratree recently, got a contact in pm and repaired like I described. Don't lose hope.
I think you could get it repaired for under 100$. If you tell what continent you live on, then probably someone could give you a contact for such glassblower in pm.
I broke a joint on a Vertigo hydratree recently, got a contact in pm and repaired like I described. Don't lose hope.
MGG
Well-Known Member
try https://www.facebook.com/aglassworkorange?fref=ts
they've always done good prices for me on fixes, I don't think it'd be that expensive to fix and i think you'd be better off getting it fixed than buying a new piece.
also check cheap high quality glass thread, steven is developing a cheap hydratube
they've always done good prices for me on fixes, I don't think it'd be that expensive to fix and i think you'd be better off getting it fixed than buying a new piece.
also check cheap high quality glass thread, steven is developing a cheap hydratube
bigtvapes
Well-Known Member
I picked up a straight glass turbine with 18mm female end at a head shop for like under $100. And I could have even gone cheaper had I chosen. I just liked this particular peice because it was big and fancy looking, I thought it was a piece fit for a unit like the EVO. And I honestly use it more than my Hydrahoneycomb.
But hopefully you still have your dry piece that came with it. This unit works fine dry. It's a lil harsh but just turn down the temp and play with your draw until you find your sweet spot. Ive used it without water to vape through and the vapor is STILL incredible. I mean I'd rather use a water pipe but if I didnt have one I could easily dry vape every day with this unit if I had to.
MGG
Well-Known Member
justcametomind
Well-Known Member
Just in case, I'm located in Europe, who to call if I need a Hydratube to be repaired?
z9
Well-Known Member
You should really look for someone locally who would be willing to try and fix it
Some members here have had luck using Hextal to repair glass. I don't know if it would work in your situation but its worth looking into. Here's a thread on it: http://fuckcombustion.com/threads/h...-your-cracked-glass-pieces.13039/#post-556218
justcametomind
Well-Known Member
I think my Cloud is really set on the hot side.
Am I supposed to do huge fast pulls in order to make the hydratube whistle?
In order to let the airflow cool? Because I got burnt taste again at 1:00
Am I supposed to do huge fast pulls in order to make the hydratube whistle?
In order to let the airflow cool? Because I got burnt taste again at 1:00
The whistle comes from the bamboo, not the hydratube. Each of the Evos that I've tried had slightly different knob calibrations. If it feels like it's too hot, just turn it down. Your 11:00 could be equal to my 12:00, so you need to kinda figure out the temp profile for your own unit. You'll find your sweet spot.I think my Cloud is really set on the hot side.
Am I supposed to do huge fast pulls in order to make the hydratube whistle?
In order to let the airflow cool? Because I got burnt taste again at 1:00
Frank Reynolds
Well-Known Member
If I go anywhere over 12:00 on my unit it will start to taste kind of burnt. Try starting at 9-10.I think my Cloud is really set on the hot side.
Am I supposed to do huge fast pulls in order to make the hydratube whistle?
In order to let the airflow cool? Because I got burnt taste again at 1:00
justcametomind
Well-Known Member
PPN
Volute of Vapor
I use mine at 13.00.....and still love it for massive clouds!
I got a bad taste with mine for the first sessions until I put a piece of cotton as a filter to avoid too much dust will go in the bamboo, taste is better but airflow is a bit restricted now....
I use it the most with a big can bubbler (inverted or connected with a whip, it depends), my bigger is the weedstar 12 trees for really big hits (and good lungs!) or the D020+ashcatcher (D020 alone is too small) or atomic perc+budget bubbler (my favorite!) and sometimes I like to use it dry too!
I don't use it a lot, maybe powered on 3 times per week for 2-4 elb's each time, although I can't imagine to sold it!
I got a bad taste with mine for the first sessions until I put a piece of cotton as a filter to avoid too much dust will go in the bamboo, taste is better but airflow is a bit restricted now....
I use it the most with a big can bubbler (inverted or connected with a whip, it depends), my bigger is the weedstar 12 trees for really big hits (and good lungs!) or the D020+ashcatcher (D020 alone is too small) or atomic perc+budget bubbler (my favorite!) and sometimes I like to use it dry too!
I don't use it a lot, maybe powered on 3 times per week for 2-4 elb's each time, although I can't imagine to sold it!
Frank Reynolds
Well-Known Member
Not sure if this has been mentioned but I didn't have any 18mm glass when I got my Cloud so I pulled my LSV heater cover off and used it as a dry piece. Works fine and has a built in carb so those of you that don't remove your ELBs can just let off the carb and sit it down.
Frank Reynolds
Well-Known Member
OG Kush rip. Can't really see any exhale but can see it filling up in the chamber.
Frank Reynolds
Well-Known Member
YaFreekin Right
Well-Known Member
Nope, the bamboo had a different design which would interfere with the vxnail.
mistergyro
Well-Known Member
hello all. i wanted to revist this thread to see if anybody could help fix my cloud...im pretty certain it's the heater losing its connection. can anyone point me in the right direction or offer up any advice? i hate having this thing around and not able to use it.
thanks
thanks