Discontinued ThermoVape Revolution for concentrates

[Friar]

^Nice looking budder bruno and very cool mod. If I wanted to build a mod like yours exactly what pieces would I need to order from madvapes? I can't seem to find that battery box.

*Update* After a good soak in iso, followed by boiling and drying @200f in the oven the DART is back to functioning like new. Only problem now is the switch location on the ego batts makes using the rev almost impossible after a couple minutes. I need to come up with a makeshift sleave until I can whip up a diy mod or get an Alpha lite or both. FWIW I'm loading 50mg-100mg dabs at a time and getting 3-5 nice size clouds, any bigger than 100mg and the dart seems to flood and can't produce vapor as effectively IME.

Current technique is as follows:
(from cold or warm start)

1.) Prime for 20-40 seconds (similar to torching a Ti nail)
2.) Drop dab into chamber
3.) Prime/heat another 5-10 seconds
4.) Test sip for vapor production, if thin/whispy wait another few seconds
5.) Slowly sip in small repetitive cycles
6.) Exhale
7.) Repeat Steps 3-6 until hits are thin/whispy then reload DART

For a PAYG device, the performance of the REV DART LV is unsurpassed.

 

[Pipes]

Only problem now is the switch location on the ego batts makes using the rev almost impossible after a couple minutes. I need to come up with a makeshift sleave until I can whip up a diy mod or get an Alpha lite or both.

A cheap temporary solution is to get a 510 extension. MadVapes has a black one.

 

[OF]

*Update* After a good soak in iso, followed by boiling and drying @200f in the oven the DART is back to functioning like new. Only problem now is the switch location on the ego batts makes using the rev almost impossible after a couple minutes. I need to come up with a makeshift sleave until I can whip up a diy mod or get an Alpha lite or both. FWIW I'm loading 50mg-100mg dabs at a time and getting 3-5 nice size clouds, any bigger than 100mg and the dart seems to flood and can't produce vapor as effectively IME.

Current technique is as follows:
(from cold or warm start)

1.) Prime for 20-40 seconds (similar to torching a Ti nail)
2.) Drop dab into chamber
3.) Prime/heat another 5-10 seconds
4.) Test sip for vapor production, if thin/whispy wait another few seconds
5.) Slowly sip in small repetitive cycles
6.) Exhale
7.) Repeat Steps 3-6 until hits are thin/whispy then reload DART

For a PAYG device, the performance of the REV DART LV is unsurpassed.

First off, cool, thanks for the report. Sounds like you got hit with what SFG and I before, the difference being he remembered it..... Anyway, like I said, I took to using the ISO bath every time after that so now I no longer worry about it. Next time I go back to messing with bubble, I think I'll try serious cleanings more often?

Sounds like you load and use yours pretty much like I do mine. You might be taking a little bigger hits, but not by much. I agree for a few hits it's top of the heap today. Put too much in and it degrades it. I wonder what's next? For sure it'll be even better, hard as that might be to understand at this time. DART will still be very cool, of course.

OF

 

[bruno13]

Bruno, I have to ask about the blue O rings...??? decoration or functional? Nice photo BTW

Actually a little of both. I think they look nice and also make it easier to grab and hold. They are the same o-ring I used on my omi carts. I think that is what the groves are for?

 

[Friar]

A cheap temporary solution is to get a 510 extension. MadVapes has a black one.

Cool, this makes me want to discard my Ego-t batts a bit less. Thanks for the tip dood.

First off, cool, thanks for the report. Sounds like you got hit with what SFG and I before, the difference being he remembered it..... Anyway, like I said, I took to using the ISO bath every time after that so now I no longer worry about it. Next time I go back to messing with bubble, I think I'll try serious cleanings more often?

Sounds like you load and use yours pretty much like I do mine. You might be taking a little bigger hits, but not by much. I agree for a few hits it's top of the heap today. Put too much in and it degrades it. I wonder what's next? For sure it'll be even better, hard as that might be to understand at this time. DART will still be very cool, of course.

OF

Yuuup, ISO bath FTW. It's definetely an awesome and exciting time to be a vape enthusiast. The dart has a ton of potential, some first hand trial and error seems to me the best way to unlock that potential.

Now I just gotta get a pure flow filter...

 

[QuantumTimeSpace]

Actually a little of both. I think they look nice and also make it easier to grab and hold. They are the same o-ring I used on my omi carts. I think that is what the groves are for?

Do you know what size o-rings they are? Just yesterday I was thinking about heading down to the hardware store and trying to find a good fit.

Also, I got back from a family gathering @the in-laws a while ago, and my preloaded DART kept me nice n high with stealthy hits throughout the event.

 

[bruno13]

Do you know what size o-rings they are? Just yesterday I was thinking about heading down to the hardware store and trying to find a good fit.

Also, I got back from a family gathering @the in-laws a while ago, and my preloaded DART kept me nice n high with stealthy hits throughout the event.

I do not know the size. I think any 510 o-rings should work. I have a pack of colored flav-o-rings I used on my omni and bought at http://shop.VAPORHEADS.NET/Flav-O-Rings-FR.htm?categoryId=-1​

 

[B.]

 

[sessnet]

Funny! What is that thing, from the cloud?

 

[Kief]

Just imagine... what if the same glass magician that is working with the VapeXhale team to make the HydraCirc is also working with the great minds at Thermovape to create some TV glass?

 

[Peloton]

The TV can easily be hooked up a variety of ways to glass pieces made by SGW, Vertigo, or any glass maker. Besides, I'd rather see their efforts focused on the upcoming power adapter. If it does end up being usb powered, it will be slick to use with those portable power unit blocks.

 

[felderosa]

Ok so I'm about to buy a TV revolution, but I kind of want the DART instead of the windowed revolution... can the TV team tell me if it's possible for you guys to send me the DART with my kit instead of the windowed piece?

 

[Sinclue]

Ok so I'm about to buy a TV revolution, but I kind of want the DART instead of the windowed revolution... can the TV team tell me if it's possible for you guys to send me the DART with my kit instead of the windowed piece?

You'll get a faster response if you contact them directly via their webpage.

 

[felderosa]

You'll get a faster response if you contact them directly via their webpage.

Thanks, I will

 

[B.]

ya, thats a hydratube built for the cloud by vertigo.

 

[QuantumTimeSpace]

I just got back from the hardware store, it looks like 7/16" OD x 1/4" ID o-rings are a perfect fit for the grooves in the ThermoVape DART, Pure-Flow, and mouthpieces. They really help get a grip, and are quite stylin', too .

 

[2clicker]

I just got back from the hardware store, it looks like 7/16" OD x 1/4" ID o-rings are a perfect fit for the grooves in the ThermoVape DART, Pure-Flow, and mouthpieces. They really help get a grip, and are quite stylin', too .

they are the same as any ol drip tip o-ring right?

11/32 OD
7/32 ID
1/16 thickness

check out http://www.mcmaster.com/#o-rings/=h1ede7 for orings of all flavors

 

[QuantumTimeSpace]

they are the same as any ol drip tip o-ring right?

11/32 OD
7/32 ID
1/16 thickness

check out http://www.mcmaster.com/#o-rings/=h1ede7 for orings of all flavors

No these are a thicker overall, with a slightly bigger ID.

 

[2clicker]

No these are a thicker overall, with a slightly bigger ID.

good to know. thanks. that is dash # 108 for anyone interested.

so i got my Dart in the mail today. i was very excited as i had 3 packages waiting for me after a crazy ass day of work. so in one package is the Dart, in the next was a 5ml VioLive jar for carrying errl and dabbing directly out of, and the last being my new 3V cells... or so i thought. the last turned out to be the contacts i ordered last week and forgot all about! the cells are still on the way so i have to wait until then to try my new Dart. so far it appears to be a winner.

anyway, a big thanks to TV and Co. for taking care of me. if your reading this the return package will be en route within hours.

im planning on hooking this up to my tube so video to come if i can find time to shoot it...

 

[bruno13]

... a 5ml VioLive jar for carrying errl and dabbing directly out of...

I have been looking for a good dabbing/storing container for oil. Is that from delta9? Once you use it for a while please post some picts and a review of how well it works. Thanks

 

[havealight101]

Bruno, I got a 5/10 ml standard(not wide mouth) bio jar from D9V. They are exactly the same as 420 jars w/o decals. Cheap too.

 

[2clicker]

I have been looking for a good dabbing/storing container for oil. Is that from delta9? Once you use it for a while please post some picts and a review of how well it works. Thanks

im not sure if its the exact same jar, but they look pretty similar. and at the same price.

amazon
http://www.amazon.com/gp/product/B003UAWB4K

delta
http://www.delta9vapes.com/products.php?product=Standard-Mouth-Essential-oil-Jar-5ml

i will be sure to post pics and a review after some use with it. now that i have it, and have some oil in it, i kind of wish i could find a 5-10ml opaque white jar. i say this because its hard to see the oil in the super dark purple jar. the oil would be much easier to see if the jar was white.

 

[bruno13]

Bruno, I got a 5/10 ml standard(not wide mouth) bio jar from D9V. They are exactly the same as 420 jars w/o decals. Cheap too.

im not sure if its the exact same jar, but they look pretty similar. and at the same price.

amazon
http://www.amazon.com/gp/product/B003UAWB4K

delta
http://www.delta9vapes.com/products.php?product=Standard-Mouth-Essential-oil-Jar-5ml

i will be sure to post pics and a review after some use with it. now that i have it, and have some oil in it, i kind of wish i could find a 5-10ml opaque white jar. i say this because its hard to see the oil in the super dark purple jar. the oil would be much easier to see if the jar was white.

Thanks, I pulled the trigger on some, will update after use.

 

[2clicker]

here are some white plastic jars... although im not sure about using plastic. id like to be able to use ISO to reclaim any residual oil left after dabbing.

http://www.sunburstbottle.com/plast...4oz-white-plastic-doubelwall-lip-balm-jar-lb3

then again ISO comes in a plastic bottle so... maybe these would be ok to use...? they are cheap as hell too!

 

[NewSchoolExplorer]

hey why do you guys keep your oil in jars? I usually keep mine on a piece of parchment paper and their all in a mason jar or plastic container. If its just a small amount of oil than I just leave it out in the open. Some of the BHO at the clubs are not properly purged and so as an extra precaution I leave it out. But if its a large amount than its on the paper in the jar.