-
SCAM WARNING! See how this scam works in Classifieds.
-
The Frolic by Limelight Giveaway has started!
The Tempest by Mad Heaters & Phatpiggie
- Thread starter oddjobold
- Start date
Pangolin 6
Well-Known Member
Nebelmann
Well-Known Member
Ordered from our French friends?
.Hi dear tempest appreciators,
I've read most of thread since the V2 announcement but could not find the information. (.. but I haven't read everything ..) If I buy the upgrade kit, the induction sleeve will be thicker - does that mean the outer wall of the sleeve will be sticking out a bit or will it be flush with the rest of the cap?
I have the V1 for almost a year and I think it's perfect. (Edit: we'll, almost perfect. The cool down click is a bit annoying ..)
But keeping the heat a little longer could be nice I guess .. I'll be going for the upgrade kit regardless. But if you know the answer it would be nice if you could share
Have a good one!
I've read most of thread since the V2 announcement but could not find the information. (.. but I haven't read everything ..) If I buy the upgrade kit, the induction sleeve will be thicker - does that mean the outer wall of the sleeve will be sticking out a bit or will it be flush with the rest of the cap?
I have the V1 for almost a year and I think it's perfect. (Edit: we'll, almost perfect. The cool down click is a bit annoying ..)
But keeping the heat a little longer could be nice I guess .. I'll be going for the upgrade kit regardless. But if you know the answer it would be nice if you could share
Have a good one!
jefferson9
Well-Known Member
Will the aluminum version (expected soon) come with the new wand adapter/leather case?
General Disaster
Schrödinger's rat!
As I recall @Brenyo said the new Wand adapter was a bonus for the early adopters so unless he changes his mind I guess not.
As for the case, I doubt it very much.
cybrguy
Putin is a War Criminal
According to the website currently:
What’s included?
What’s included?
- Tempest 2
- 3mm zirconia balls within the Head
- Long cooling unit
- 2pcs Spare O-rings (6x1) and 1pc Bowl Screen
- Pre-order bonus: Wand Stand v2 (Includes the adapter, improved performance compared to the previous glass adapter)
Last edited:
Gonchin
Well-Known Member
If you have the V2 adapter try 525 until timeout with the default zirc balls. The V1 adapter is a higher temp, but I don't have one, so I'm not sure how much. Try 40ish. more.
kokolokokolokon
Well-Known Member
I don't know if the new thicker layer will protrude from the bottom but... If it does, it will be very little, and it is something that can be solved by sanding the bottom edge a bit (that is if Brenyo hasn't already thought of it). On the upper side it will fit perfectly because of the new calibration housing. Plus you will have the new clicks and VI
Well, kids, when I was young I had to go out, walk 700 miles uphill (both ways!) through the snow, to get a green OG Tempest to get the green VI. You youngins have it so good!
van Blitzen
Member
I also tried the Boro 2.5mm balls in my T2 yesterday and i absolutely love them. The flavour is better than rubies or zirc but in my V1 i like the rubies most. I ordered some quartz and SiC (3mm) balls and im very exited to try them soonGlass beads in the T2 is The Way...more flavor than 2mm/2.5mm rubbies.... good science
TheUniBowler
New Member
Does anyone have good stem recommendations for the v2 head?
I’ve currently got it on a vaphitx and revolve gen 2 MP but am looking to upgrade if possible.
Ideally a titanium v1 stem or v2
I’ve currently got it on a vaphitx and revolve gen 2 MP but am looking to upgrade if possible.
Ideally a titanium v1 stem or v2
I like the v2 head on the v1 stem. However if you use the helix tube. It gets very hot like it does for the v1 head. The vapor is smoother and cooler but you sacrifice with a very hot stem. Through the direct tube the vapor feels hotter than the v2 stem but the stem doesn’t get as hot but the mouth piece will get pretty toasty.
The VI housing is also included in the upgrade kit. So the new sleeve should be flush with the new VI housing. If it protrudes out it’s likely gonna be on the other end of the tempest head.Hi dear tempest appreciators,
I've read most of thread since the V2 announcement but could not find the information. (.. but I haven't read everything ..) If I buy the upgrade kit, the induction sleeve will be thicker - does that mean the outer wall of the sleeve will be sticking out a bit or will it be flush with the rest of the cap?
I have the V1 for almost a year and I think it's perfect. (Edit: we'll, almost perfect. The cool down click is a bit annoying ..)
But keeping the heat a little longer could be nice I guess .. I'll be going for the upgrade kit regardless. But if you know the answer it would be nice if you could share
Have a good one!
Cacahuates
Well-Known Member
What is this c tool and how does it work? I dont understand how it adjusts the bowl. I've found adjusting the bowl with this thing it's only negative.
I'd like to as well community LoL. Kinda surprised the MH website isn't updated yet on the 2... also, what size bowl does it ship at/stock? .10??
Cacahuates
Well-Known Member
I think it's the middle one. Once you change it's not impossible to adjust. I just wonder if there was an easier way.
.d
Wubba Lubba dub-dub
Maybe use the search function on this thread before asking people to repeat themselves again and again - it was explained at least 10 times, with pictures and with steps, in this very same thread.
It is really not hard to search for keywords, you had google all these years before GPTs, I'm sure you can enter some letters, tick a checkbox and press search, then scroll some pages to find what you need.
Dirigible_Molecule
Retired rebel.
When this happens repeatedly it's time an FAQ is created. Natural progression as new people buy or enquire, as some folks can't be bothered to go back 4 pages.
Simple FAQ consists of titled links to existing posts & the manual.
@Brenyo is it possible on FC? I've never created a thread so no idea.
There's a knack to it well documented in this thread, at least 4 times! Follow those and soon it willl be easy.
Simple FAQ consists of titled links to existing posts & the manual.
@Brenyo is it possible on FC? I've never created a thread so no idea.
The V2 bowl screen is adjustable to all the positions forever, unless you mangle it ofc. Buy spares 8)
There's a knack to it well documented in this thread, at least 4 times! Follow those and soon it willl be easy.
Gonchin
Well-Known Member
Unscrew the mouthpiece from the the stem, remove the heat shield and inner-cooler. Slide the C-Shape tool onto one of the 2 sets of grooves located on the mouthpiece end of the stem. Use that to set to depth of the screen, depending on what groove you use.
Cacahuates
Well-Known Member
Thanks so much for your reply. Very much appreciated
iranintoavan
Member
Do you know if the boro balls be cleaned with a torch like the stock zirc ones?I also tried the Boro 2.5mm balls in my T2 yesterday and i absolutely love them. The flavour is better than rubies or zirc but in my V1 i like the rubies most. I ordered some quartz and SiC (3mm) balls and im very exited to try them soon
