Big things happening on the IG this weekend!
Discontinued The Splinter by RBT
- Thread starter RastaBuddhaTao
- Start date
- Status
almost there
Well-Known Member
New V2 is humming on the Paranormal. Running cooler than I'm used to in TC but wattage is great. The Paranormal is heavy and chunky to start with so the extra size and overhang of the V2 doesn't bother me.
What a great deal. Too bad it looks like PIU is no longer carrying RBT vapes. I've had great customer service from vgoodiez too though.
I also noticed my new V2 runs much cooler than any of my previous splinters. The @HerbieVonVapster splinter profile that has worked flawlessly for 3 other splinters doesn't even make the heater warm. Luckily I remembered you also had this issue and I dialed up my resistance from .24 to .253 to get things rolling but scorching is a risk with this unit. May have to use this one as a log vape on wattage mode if things don't improve. As far as I know the V2 is the only splinter I have that has the ceramic plate instead of mica, wonder if the lack of heat is because of this
Last edited:
bossman
Gentleman Of Leisure
I allowed myself a backup V2 during the PIU clearance and both of mine perform well at .26 on my dna mods. I have one really dialed in a rxg3d too and while it browns less evenly it's still not a scorch risk. Full disclosure, I use my Splinters at home and don't mind giving it a pinky twist stir between hits while I check how it's doing. And unlike the DNA mods, which have the aforementioned normal/real temp range, I get fast clouds from the wismec at 345° and max out at 385°.
sickmanfraud
Well-Known Member
You might want to consider adding your IG link to your signature. So it would be easier to locate.
Jayvape
Well-Known Member
I recently got a splinter v1 and a splinter z v2. I installed myevic firmware on my rx gen 3 dual mod and set up tcr mode using sneaky pete's video. Tcr works great with the splinter but when using the splinter z the temperature reads either between 10 and 50 degrees or 900+ degrees. I found I can use the splinter z in tc mode and it works better, but when using tc mode I often get the message atomizer low. Has anyone else had this issue or know a solution? Those that have a Z and use the myevic firmware on the rex gen 3, how do you use your Z?
Hey all... just a quick note to announce the appointment of cole@rastabuddhatao.com as the new CPO who will now be taking care of all customer service needs. He is @RBTcole round these here parts so congratulate and welcome him... RBT is stupid excited to have such a nice guy taking care of RBT Nation.
Congrats to @Summer for winning last weeks contest on IG.... next up a Splinter Z V1 with cooling kit.
Congrats to @Summer for winning last weeks contest on IG.... next up a Splinter Z V1 with cooling kit.
Summer
Long Island, NY
seki
Well-Known Member
Splinter V1's are on sale for $39.00.
https://www.rastabuddhatao.com/product-p/spv1n.htm
Paired with an inexpensive mod box, you'd be hard pressed to find better value for your money.
https://www.rastabuddhatao.com/product-p/spv1n.htm
Paired with an inexpensive mod box, you'd be hard pressed to find better value for your money.
Megaton
Well-Known Member
Woah that's an AMAZING deal!
Not that good a deal... but still some great deals going on at rastabuddhatao.com 
CalyxSmokr
Well-Known Member
sorry I missed that v1.
Is there an advantage to the splinter vs. milaana? I dont even really want to mess with mod settings if not needed. Just looking for portable convection and dont mind stirring
Is there an advantage to the splinter vs. milaana? I dont even really want to mess with mod settings if not needed. Just looking for portable convection and dont mind stirring
bossman
Gentleman Of Leisure
The advantages are regulation, versatility, and affordability. You can put a Splinter on a janky mod and slum it with subpar performance (
@eideal852) or you can spend $35 on a Wismec Reuleaux RX GEN3 Dual and have assorted firmware options and different modes to use for different results. You can even try to find a dna mod for more precise TC and more even roasting.A V1 or V2 (I have two of each) on a rxg3d is a heck of an on demand convection setup for around $100 and you don't need to fuck with settings at all if it doesn't interest you, just set the mod from 28 to 40W and you're good.
I recommend adding the XL8R cooling stems for bigger, more comfortable clouds. Glad to hear the glass is thicker on the new grey ones.
CalyxSmokr
Well-Known Member
Ok I thought I needed to spend more on a mod than that. I have a pico 75 for my sai but I dont want to change my settings back and forth. Is there an under $50 mod that is even better? Do I need a dual battery setup?The advantages are regulation, versatility, and affordability. You can put a Splinter on a janky mod and slum it with subpar performance (
A V1 or V2 (I have two of each) on a rxg3d is a heck of an on demand convection setup for around $100 and you don't need to fuck with settings at all if it doesn't interest you, just set the mod from 28 to 40W and you're good.
I recommend adding the XL8R cooling stems for bigger, more comfortable clouds. Glad to hear the glass is thicker on the new grey ones.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
No, the sinuous p80 is also good choice for a single battery, and these mods do cost more depending where you buy, but shopping around yeah you can easily find them under $50. A DNA mod would cost over, but it is not really so necessary. The Pico could work for Splinter if you get a heat sink to fit, all take ArcticFox FW.
GoldenBud
Well-Known Member
DNA75 mod for under 60$ (take the 1$ coupon there)
https://www.aliexpress.com/item/1000006046301.html
tested and works impeccable with Splinter Z, It'll work with Splinter too
DNA is more accurate and powerful. it also tends to maintain the battery better.
jeebusiron
New Member
Sale is over unfortunately
Splinter Blow Out Close Out... get em while they last
...and check out the Articles in the education section written by the Universal Authority
...and check out the Articles in the education section written by the Universal Authority
Last edited:
sickmanfraud
Well-Known Member
All splinters or all foreign Splinters?
I never heard if you are going to make any domestic XL8r stems?
GoldenBud
Well-Known Member
Arctic foxSo cool, I haven't tested yet but I like it alot! Can someone tell me the best custom software to put on this mod, any experts here to set up mod?
Tcr 120
40W
Temp starting from 190C
But first of all prepare a pc for installing NFE tools, get a proper micro usb cable
Ok I have some experience with installing arctic fox, I installed it on a p80 with a stempod but i did not give it a chance to really learn it. Gonna be more patient this time around. is artic fox better than evic ?
GoldenBud
Well-Known Member
Never tried the myevic but I think they both work well
Ok tonights the night I use my splinter! I have my wismec reuleaux rx Gen3 mod and I just loaded up arctic fox. I see this screen here in the pic, can I configure everything from here? Pushing all those buttons on the mod is a pain. Can anyone give recommended settings for the splinter, I wanna use a mode where the mod does all the work. I just want a great first experience, I'm afraid to combust in wattage. Thank you in advance.
bossman
Gentleman Of Leisure
Ok tonights the night I use my splinter! I have my wismec reuleaux rx Gen3 mod and I just loaded up arctic fox. I see this screen here in the pic, can I configure everything from here? Pushing all those buttons on the mod is a pain. Can anyone give recommended settings for the splinter, I wanna use a mode where the mod does all the work. I just want a great first experience, I'm afraid to combust in wattage. Thank you in advance.
- Status