The Screwball by Vapvana

purplenurple24

purplenurple24

Well-Known Member
TedJones said:
Yea, even slight differences in adapters (if using), like this, make a difference :brow:
Click to expand...
Do you have a preference? I’m currently running the Screwball through a Cloud Connoisseur Influx with a CC ash catcher. Just preordered the new Protege with a CC drop-down so I’m excited to see how they hit differently (including the ash catchers).

I’ve also used my Screwball with a bigger TAG piece (not my fave) and the Vgoodiez globe (also not my fave, but maybe better than the TAG).

The Influx is very lovely though (as I think you’re already aware)
 
TedJones

TedJones

Well-Known Member
I do like the small reclaimer since it’s a little less restricted for my dual matrix, FC199, since they have a little bit of a chug. Something about the vapor going from top to bottom without rising again is kinda cool.
The 1” drop probably gets used most though. Have the 3” and other cheap ones that are good to use as well.
Think I bypassed an adapter last time used with Influx .. that thing pulls! Also have that Protege on order :bowdown:
 
P

Pcloudy

Well-Known Member
purplenurple24 said:
Do you have a preference? I’m currently running the Screwball through a Cloud Connoisseur Influx with a CC ash catcher. Just preordered the new Protege with a CC drop-down so I’m excited to see how they hit differently (including the ash catchers).

I’ve also used my Screwball with a bigger TAG piece (not my fave) and the Vgoodiez globe (also not my fave, but maybe better than the TAG).

The Influx is very lovely though (as I think you’re already aware)
Click to expand...
Using mine through a dante with whip. I only had a 14mm whip and was using an adapter. My 18mm whip just came in and the diameter of the glass that the tubing fits over is slightly smaller making a noticeable difference in the pull. Its fantastic both ways, its just incredible how such a miniscule difference can change it so much.
 
purplenurple24

purplenurple24

Well-Known Member
TedJones said:
I do like the small reclaimer since it’s a little less restricted for my dual matrix, FC199, since they have a little bit of a chug. Something about the vapor going from top to bottom without rising again is kinda cool.
The 1” drop probably gets used most though. Have the 3” and other cheap ones that are good to use as well.
Think I bypassed an adapter last time used with Influx .. that thing pulls! Also have that Protege on order :bowdown:
Click to expand...
I’ll definitely be acquiring some different attachments and pass throughs to try out. Can’t wait for our Protégés to get made and shipped.
Pcloudy said:
Using mine through a dante with whip. I only had a 14mm whip and was using an adapter. My 18mm whip just came in and the diameter of the glass that the tubing fits over is slightly smaller making a noticeable difference in the pull. It’s fantastic both ways, it’s just incredible how such a miniscule difference can change it so much.
Click to expand...
I tried a whip on my Influx once when I first got it and wasn’t a huge fan, but I need to give it another shot. I’d really love to love it.
 
CreatureGlass

CreatureGlass

Member
2pumpchump said:
I like this thought as a option or ad on witch now I think about it I can't recall seeing any adapters to correct pinout in either direction ... I might have just overlooked them. But if what I understand is correct the coils are compatible other than the pin out right?
Click to expand...
Spot on, you just have to swap the pins in the coil or the pid.
 
coolbreeze

coolbreeze

Well-Known Member
dunwich said:
Just ordered a Screwball - my first ball vape. Im so excited I can't desribe it.

What kind of bong/rig should I get? (Im in the EU if that matters)

Any other accessories that is nice to have when it comes to the Screwball?
Click to expand...
These Ehle vapor rigs should be great:
verdampftnochmal.de

EHLE Premium Glass Waterpipes

The waterpipes from EHLE impress with the highest quality materials and workmanship and are manufactured exclusively for VDN. Absolutely premium!
verdampftnochmal.de verdampftnochmal.de
And there's this cheaper model which will need a downstem, too:
verdampftnochmal.de

Vaporizer Water Tool deBlub GTF

Water filter for vaporizers, we offfer the new deBluB universal water tool for many Vaporizer brands, check it out! NoW!
verdampftnochmal.de verdampftnochmal.de

The Screwball bowl is 19mm, so you will need a 14mm male to 19mm female dropdown for it to fit your 14mm bong.

You could check with @iDRINKBLEACH to see when Vertexes will be available again, those do great with flavor and lots of cooling:
cloud-connoisseur.company.site

Vertex

Vertex stands at 12.5 inches tall with mouthpiece. This glass piece is unlike any other on the market with a Swiss perc downstem, 4 hole diffuser, faberge body, and a spiked mouthpiece. This is an 18mm glass piece. This piece will be well balanced between Prophet and Protégé, whereas one is pure...
cloud-connoisseur.company.site cloud-connoisseur.company.site
 
Vapvana

Vapvana

Well-Known Member
Manufacturer

Video Reviews + Updates​

Hey y'all! Been super busy and have a bunch of updates to share :love:

But first, here is a round up of some recent and older Screwball reviews :rockon:

Troy & Jerry Think Dank​


Lee from TableTopBong​


Review by Moo I Am A Tree​


Review by TerpPusher​



New Bowl Design​

Fresh off of Fusion 360 this morning, I finished up a new bowl mockup that would use glass joints w/ o-rings instead of a metal joint (the design is missing details like the bowl cutouts, etc).

Please let me know your thoughts :rockon:

sb-bowl-glass-joint-mockup.png


In Person Events​

A new cannabis consumption lounge opened up in Tempe AZ called Exhale Society

I ended up setting up a couple owners with a Screwball kit, and it led to me connecting with a cannabis brand out here called Summus.

Here is a few recap videos from 2 events we partnered up at in AZ:

Screwball Mascot​

I also met an Illustrator at the cannabis lounge, and we started working on some mockups for new stickers :D

sb-mascot-chill-mockup.png
vapvana-sb-mascot-stoned.png


Let me know which eyes you like best, or if you have any ideas :science:

Official Vapvana Office​

I'm excited to announce that I've officially signed a 12 month lease for an office in a co-working warehouse called Saltbox :party:

IMG_9625.jpg


This will give me access to amenities like secure storage, shipping supplies, loading dock, daily pickups, photo studio, etc.

I am all in for 2024, and am beyond excited to hit it running ASAP :rockon:

Presale Update​

The current Screwball Presale will run until January 28th at 11:59pm MST.

You can use code 'FC10' for an additional 10% off the presale pricing.

I'm not big of being 'salesy' - however I will say that since I am still in startup / kickstarter mode, any presale purchase will help get this company off the ground :bowdown:

Next Update​

I'm in the process of moving into the new office / shipping facility, updating the website, creating/updating content, finalizing new product designs, and whatever else I'm forgetting to share :freak:

If you need anything please send an email to hi@vapvana.com

Otherwise I look forward to updating y'all ASAP. :rockon:

Talk soon,
Cal
 
T

thetaform

Member
I’m new to the forum, so apologies if this has already been asked, but does anyone know if the PID is compatible with a smart plug?

The specific use case would be PID plugged into (HomeKit) smart plug, in my basement office. Ideally I could turn the plug on/off from upstairs from my phone. So I guess the PID would effectively be “on” at all times, but the smart plug would supply/cut power remotely.
 
.brew

.brew

Well-Known Member
thetaform said:
I’m new to the forum, so apologies if this has already been asked, but does anyone know if the PID is compatible with a smart plug?

The specific use case would be PID plugged into (HomeKit) smart plug, in my basement office. Ideally I could turn the plug on/off from upstairs from my phone. So I guess the PID would effectively be “on” at all times, but the smart plug would supply/cut power remotely.
Click to expand...
no reason it wouldn't be
 
.brew,
P

Pcloudy

Well-Known Member
thetaform said:
I’m new to the forum, so apologies if this has already been asked, but does anyone know if the PID is compatible with a smart plug?

The specific use case would be PID plugged into (HomeKit) smart plug, in my basement office. Ideally I could turn the plug on/off from upstairs from my phone. So I guess the PID would effectively be “on” at all times, but the smart plug would supply/cut power remotely.
Click to expand...
Yeah you would probably need a pid with a more traditional on/off switch that could always be in the on position.
 
TedJones

TedJones

Well-Known Member
Pcloudy said:
pid with a more traditional on/off switch that could always be in the on position.
Click to expand...
The DC maybe? I don’t have a smart plug to try or know much about the settings on controllers.
vgoodiez.com

Micro PID Controller in Black by Disorderly Conduction

New 3D printed Enclosure by Pelisaver! Budget Enail made by Disorderly Conduction UNIT only with power cord. It's a electronic nail used for vaporizing concentrates and gives the user full control over setting a consistent temperature for optimal vaporization, without the use of, or need for, a...
vgoodiez.com vgoodiez.com
 
TedJones,
  • Like
Reactions: Vapvana
You must log in or register to reply here.
Top Bottom