Discontinued The Persei Vaporizer for herbs and concentrates.

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Can I use Sony VTC5's in my persei? If so, is there a benefit?

Are they protected?

@Severmore also do this take the black rod on the hercules, dump herb inside, loose pack, press for about 10 seconds shake and press again for another 10 seconds, small shake, and start slowly inhaling.

If you have the hammer top, just turn it on and shake a few times while its heating. Should work.


Also if you want to try a vape experience no other vape can offer, like Fractional vaping then do this.

Sr71, white rod, coil with oil, screen on top of that herbs on top of screen.

once the oil starts to run out, the herbs start to kick in.

The herbs acts as a filter for the oil, and all you get is bliss bliss bliss
 
Last edited:

OB

Well-Known Member
Ouch, Yea thats a deal breaker. Read of it having a ceramic heater with a ss screen above, but probably speculation from a tread on this site lol. Stoked to see what w9 has for us over the next few months
 

Severmore

Well-Known Member
Are they protected?

@Severmore also do this take the black rod on the hercules, dump herb inside, loose pack, press for about 10 seconds shake and press again for another 10 seconds, small shake, and start slowly inhaling.

If you have the hammer top, just turn it on and shake a few times while its heating. Should work.


Also if you want to try a vape experience no other vape can offer, like Fractional vaping then do this.

Sr71, white rid, coil with oil, screen on top of that herbs on top of screen.

once the oil starts to run out, the herbs start to kick in.

The herbs acts as a filter for the oil, and all you get is bliss bliss bliss

I've been pretty lazy lately and very spoiled with the two loaded Hercs I have in rotation...however, it's about time to get my fingers sticky. I will attempt these strategies next time I clean an upper chamber out. Thanks!
 
Severmore,

530rasta

Well-Known Member
Anyone use co2 oil with their hercules?

How long are you getting grams to last in this thing? I guess i should ask how many hits....
 
530rasta,

Patrick Hughes

Stoneman
Can I use Sony VTC5's in my persei? If so, is there a benefit?

Sony VTC5 batteries are not protected but they are IMR so most people feel good about them. They are a "safer" chemistry than li ion. They are very high drain (40 amp). I have used vtc4s in my Persei and they worked fine.
 
Patrick Hughes,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Anyone use co2 oil with their hercules?

How long are you getting grams to last in this thing? I guess i should ask how many hits....

there is no answer to this. Its basically "how many licks does it take to get to the center of a tootsie roll pop"

One puff from a guy i know might be 10 from you, i know guys that can take a 40 second rip and kill the gram in 2 - 3 pulls.

Its all up to you.
 

530rasta

Well-Known Member
For sure. I guess im curious how long folks here on fc get a gram to last out of their herc? Just average couple second puffs.

I broke it down and put it back together, it was a lot easier then I thought. Im curious if its tough to pull out the ceramic rod once youve used the herc a few times. It was pretty snug in there already, im trying to imaging it after grams of oil.

Pretty cool setup how this is built. Reminds me of the old Hakko irons we would take apart and use the ceramic rod as a lighter lol

edit- also can i throw some high grade bubble in there? or just co2 and bho ect..
 

DieHard

Accessory supplier
Accessory Maker
For sure. I guess im curious how long folks here on fc get a gram to last out of their herc? Just average couple second puffs.

I broke it down and put it back together, it was a lot easier then I thought. Im curious if its tough to pull out the ceramic rod once youve used the herc a few times. It was pretty snug in there already, im trying to imaging it after grams of oil.

Pretty cool setup how this is built. Reminds me of the old Hakko irons we would take apart and use the ceramic rod as a lighter lol
Push the dirty rod inside the tank to remove rather than trying to pull it out. If there is build-up on the rod it may not want to pull out from the bottom.
 

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
For sure. I guess im curious how long folks here on fc get a gram to last out of their herc? Just average couple second puffs.

I broke it down and put it back together, it was a lot easier then I thought. Im curious if its tough to pull out the ceramic rod once youve used the herc a few times. It was pretty snug in there already, im trying to imaging it after grams of oil.

Pretty cool setup how this is built. Reminds me of the old Hakko irons we would take apart and use the ceramic rod as a lighter lol

edit- also can i throw some high grade bubble in there? or just co2 and bho ect..

I guess a general ball park can be said, but there are still more factors to take into account.

As for the Hercules the rod might be snug dont worry about that, with time if it gets gunked up on the top you can still run it empty and clean it or when warm take off the rod.

As for the set up, thanks for the compliment the Hercules is a pretty nice little device, giving the user total control over its future.

As for it vaporizing high grade bubble.

Think of it this way. If it can fit inside, most likely its going to get vaporized.

Using the coil is up to you, i wouldnt use it for the dirtier stuff ( when your in a bind and nothing is available, we all have been there )

In other words keep the coils for the cleaner water extracts and pure oils, and no coils for the dirty water extracts that leave behind gunk and crap.


Also as @DieHard said about the rod, you can pull it out, or push it in. Depends on you. I suggest you pull from the bottom if no build up, and push inside if build up has started.

Prior to this you can also run it empty to clean up some of the build up just in case.


Edit.


As a new program, if anyone wants to do reviews 400 words with pictures involved on any vaporizer on w9tech.com we will make you a preferred customer and get an additional up to 10% off purchases. Must be connected with your fuckcombustion user id.

Images must include your own pictures, with a card that has your name on it and link back to your FC public profile as it will be used to verify each review.


pm me for details.
 
Last edited:

Hedonismbot

Well-Known Member
@Hedonismbot I'm going to take care of it Monday. I had to spend the day working at the office to find some extra to coils to send out with the hercs.


As for the SS top caps that was a mistake.

I just received the oil coil and ss top cap for my surplus SR71. Many thanks to you and @nao12000 for taking care of this so quickly!
 

Caligula

Maximus

Right, I know but I need the glass part too. I guess I was just asking if I had to do it piece mail versus buying an all in onw "Ti KISS Globe" like this:

http://www.w9tech.com/vape-pen-kiss-globe/

No big deal, I just need to add the glass to the order of cores. I just like the fact that the globe/core combo comes with spares and was hoping there would be a similar package with the Ti version.
 
Caligula,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Right, I know but I need the glass part too. I guess I was just asking if I had to do it piece mail versus buying an all in onw "Ti KISS Globe" like this:

http://www.w9tech.com/vape-pen-kiss-globe/

No big deal, I just need to add the glass to the order of cores. I just like the fact that the globe/core combo comes with spares and was hoping there would be a similar package with the Ti version.

Oh you want the whole globe with ti coil? We don't have them yet but will soon. So the to coils are separate ATM.
 

hoptimum

Well-Known Member
if i had to guess id say your probably using some of the very old EO carts that needed to be oxidised before use and had reports of bad taste due to the maufacturing process if yhou didnt oxidise them ive bought a bunch of 2.4 ohm carts meant to be used on 3.7v ran several grams through em on an ophos before upgrading to the persei and have run them on my persei at 7.4v and never had the burnt metal taste your describing also when id load a gram id get a couple weeks out of an eo cart nightly use to help me sleep and weekends heavy use with a few friends

agreed, my EO tastes nothing like metal, just CO2 goodness
 
hoptimum,

vapor 4 life

Well-Known Member
What does it mean if my Persiei flashes when I press the botton? It flashes with and without the Herc attached. is it broken? I don't know how long I can last without it. I knew I should have bought a backup.
 
vapor 4 life,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Any tips on preventing leaks on the hercules?

Cool down periods. You have to cool it down after use. The Oil dropping into the bottom chamber is a feature that was designed to save your oil, so it does not cook your oil. Because of the heater used and the way it heats the oil, residual heat will kill all oils. That is why the Hercules SR series preserves the taste better then any other vaporizer, because people cool down their oils really fast instead of letting them cool down on their own. This feature essentially makes the end user save their oil.


Hope that helped.

Always cool down your herc after every use.


@Vape 4 Life could be dead batteries, bad charger, bad top.
 
Top Bottom