Discontinued The Persei Vaporizer for herbs and concentrates.

K

kernal6500

Well-Known Member
Point issued for discussing moderator decision
Just expressing my opinion and stating facts, Staff member


momofthegoons said:
@kernal6500 since you have decided that the W9 Tech stuff isn't for you, I suggest you move on to another thread. Any further comments from you regarding your dissatisfaction or arguing with W9 will be considered company bashing and earn you a point.
Click to expand...
! ON
 
kernal6500,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
@kernal6500

I dont know but this sure looks like a ceramic disc

So yes the design is ours.

Original post on

http://fuckcombustion.com/threads/t...erbs-and-concentrates.5772/page-4#post-217814

Originally talked about in 2011

http://fuckcombustion.com/threads/omicron-vaporizer-for-oils.4301/#post-177536

Also I like the fact that you want our ceramic wicks to be used on the same atomizer thats based on our designs.



posted about 3-4 years ago here on FC.



i would also like to point this out.

Posted on September 2014





and a comment on that video.




So all in all. We inspire everyone.
 
Last edited:
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
jason5117 said:
Kernal6500 did not bash the company at all. He is just pointing out his opinion plus he is true on spending a lot of dollars on w9tech. Giving him a point in ridiculous.
Click to expand...

He was told that further posts would be seen as company-bashing, which it would be under our rules. Our rules also say:
  • Public discussions of staff decisions are not permitted on the site. If you have any concerns or queries relating to a staff decision please take it up in private with a staff member.
He broke that rule and got a warning point for it. Now you've done the same thing. Both of you should review the rules.
 
SamuraiSam

SamuraiSam

Extraction Technician
Happy to help @jsnstanley ! Thanks for your patience.

We have received the replacement wicks and have mailed them out or issued store credits to everyone I'm aware of who was missing a 1701 wick with their Alpha Centauri kits. I updated each support ticket regarding missing donut wicks with shipping information a few days ago; if you were missing a wick and haven't heard from me, please add a comment to your ticket so I can get your kit made whole.

Hopefully I didn't miss anyone :)

DrRishi said:
Is there a minimum version of the Persie that I should have in order to be able to run the AC at 7.4 Volts? I am using the Dual coil which has a resistance arround 1 ohm.
I hope I didn't get a Persei that is too old (2340 stamped on it).
Click to expand...
The KISS Alpha Centauri has been tested to work on every generation of Persei, as long as good quality batteries are used. (I personally have two Version 1 units that both power it fine). If your Persei has experienced a failure, regardless of its generation, our repair department would be happy to take a look at it. Have you opened a support ticket regarding this issue?

masaki said:
Is it normal for 1701 to leak through the bottom..?
Click to expand...
Nope... Only if it's over loaded, or you leave it hot (try some cool down draws to prevent leakage with any coils of the Alpha Centauri). Warm oil is always going to flow easily, and if there's an air hole at the bottom of your heating element, use common sense to maintain cleanliness.
 
masaki

masaki

Well-Known Member
SamuraiSam said:
Happy to help @jsnstanley ! Thanks for your patience.

We have received the replacement wicks and have mailed them out or issued store credits to everyone I'm aware of who was missing a 1701 wick with their Alpha Centauri kits. I updated each support ticket regarding missing donut wicks with shipping information a few days ago; if you were missing a wick and haven't heard from me, please add a comment to your ticket so I can get your kit made whole.

Hopefully I didn't miss anyone :)

The KISS Alpha Centauri has been tested to work on every generation of Persei, as long as good quality batteries are used. (I personally have two Version 1 units that both power it fine). If your Persei has experienced a failure, regardless of its generation, our repair department would be happy to take a look at it. Have you opened a support ticket regarding this issue?

Nope... Only if it's over loaded, or you leave it hot (try some cool down draws to prevent leakage with any coils of the Alpha Centauri). Warm oil is always going to flow easily, and if there's an air hole at the bottom of your heating element, use common sense to maintain cleanliness.
Click to expand...
pretty sure I use my common sense as often as any common situation. Kiss AC 1701 is not common to me so I'm asking.
Now can I dump the whole bottom adapter to my AC into ISO or should that be avoided and just wipe what's dirty with ISO?
 
masaki,
Fredster951

Fredster951

Well-Known Member
So I been using the Kiss AC almost daily with dual coil 7.4 set up. Ready to try the 1701 now. I can use this ceramic donut at 7.4 or 3.7?
 
Fredster951,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Fredster951 said:
So I been using the Kiss AC almost daily with dual coil 7.4 set up. Ready to try the 1701 now. I can use this ceramic donut at 7.4 or 3.7?
Click to expand...

you can use it what ever way you want.
lonelyhero said:
man id love to try the new herc options but cant find anything in nj even if i could convince g to let me test lol
Click to expand...

on a side note since i like torturing people, if i have one youll get one. just send me a pm and bother me every other day until i say i dont have one.
 
ArchVape

ArchVape

Princess of the Biscotti Republic
masaki said:
Captain didn't make the crunch. And the cow didn't make the milk. If I was on a cereal forum I'd prolly get a point :(



Is it normal for 1701 to leak through the bottom..?
Click to expand...

I was getting alot of leaking out of the neg lead hole on the kiss cart 1701 and the AC kiss 1701. I tried cool down draws, tighting the neg lead lock ring. Harder to notice it on the AC kiss becasue of the housing but on the Kiss Cart can see it forming after each use. @masaki Did yours look like this?

WP_20141012_11_08_44_Pro_1.jpg
 
ArchVape,
  • Like
Reactions: masaki
You must log in or register to reply here.
Top Bottom