The Mighty/Mighty+ by Storz & Bickel

whatitdew

whatitdew

Vapes R Great
Even with using the fine screen in the CU, I still gotta have an extra.

Don't like having to wait for the pieces to dry before I can use her again haha.

Also since I have ratchets wpa adapter I am buying a third cu to mate exclusively with the wpa

Before I owned this vape I thought it would be a pain to clean and maintain but it is dead easy


Also the stand is a must for me, S&B need to get with it and include their own. When I'm opening jyarz, taping out bowls, twisting CUs and tamping tools it's nice to be able to sit the Mighty down.

@Reggie Watts we are the opposite haha.

My must have Mighty accessories are:

1) extra cu
2) Ratchett stand and cu wpa
3)mighty wear and tear kit
4) Vatra soft case
5) a soft place to land after blast off:ko:

I Gotta try the capsules soon!
 
tdriver

tdriver

Well-Known Member
just send my mighty for rma (err004) ... and put out my old solo.........:doh:

after a year and a half it reminded me how hard the drawing resistance is with the solo,
which was actually the thing to make me buy the mighty in the first place....

did I mention the harshness?? :ugh: (even though I use water cured bud)

.....anyways..... the solo gets me where I wanna be, but that's about it. :mental:

would I buy the mighty again if I had to???
definitely yes :rockon::love::love::rockon::leaf:
 
V

Vifzor

Well-Known Member
Reggie Watts said:
Not to contradict you or anything, but if you use a fine screen in the CU, you can totally just have one. I have a backup, but I usually don't use it because I keep the first one clean. I also think a stand is unnecessary. I just hold the vape during a session, and if I have to set it down, gently place it on its side. I do like the dosing capsules, but they are optional as well.
Click to expand...

Can you show a picture of the screen in the CU if you don't mind?
Thx for all of your advices guy's !
Once I get my mighty should I use first without anything to avoid to inhale the manufacturing particle left?
 
Vifzor,
K

klynn

New Member
I have the stand too but i also but velcro on the bottom of the stand and my mighty so it stays put and i must say when attaching a whip to my glass pieces the stand is a dream, i mean its almost like a phone dock.
 
Last edited:
ktmstick

ktmstick

Well-Known Member
LukeMLH said:
Considering getting the Mighty from Amazon but concerned it may not be a legit unit or there may be problems.

It seems pretty legit but just wanted to see if anyone here had heard of the seller or had any experiences with buying the Mighty from Amazon.

https://www.amazon.co.uk/Mighty-Portable-Vaporizer-Storz-Bickel/dp/B00P2K1UQ6
Click to expand...

Bought mine through eBay and also bought a plenty from Amazon (same seller as you plan to buy mighty from) all was as expected. Amazon are always very easy to deal with if you have a problem. To ease your mind you can contact s&b after purchase and give them your s/n to confirm it's the real deal. I love my mighty, used everyday along with my plenty, 6 weeks smoke free and will NEVER go back.
 
vapviking

vapviking

Old & In the Way
Winegums said:
That is not a stable stand at all, it's very easily to bump and tip over.
Click to expand...
I agree that using the stir tool as a little foot is cute, but risky. The only crack on my Mighty came essentially from falling over from a standing position, and the little foot is only marginally stable.
For my water setup which attaches Mighty via a whip a stand is an important piece (thanks @Ratchett yours works great and glows in the dark! -- I also have one I made from a length of copper wire, but that's another story). The stand doesn't travel with me when I go out though.
I used the stand even more when using the filling accessory but now I've been using dosing caps all the time and a stand is much less important.
 
silentvaper

silentvaper

Member
LukeMLH said:
Considering getting the Mighty from Amazon but concerned it may not be a legit unit or there may be problems.

It seems pretty legit but just wanted to see if anyone here had heard of the seller or had any experiences with buying the Mighty from Amazon.

https://www.amazon.co.uk/Mighty-Portable-Vaporizer-Storz-Bickel/dp/B00P2K1UQ6
Click to expand...
Hey Luke if you go back 3/4 pages you will read about my experience with the exact same seller. Long story short they sent me a "medic" in an unsealed box and with no instructions, after contacting S&B they confirmed that it's LEGIT and sent me the instructions. Had it for about a month now could not be happier.
 
G

Goatpig74

Member
Hello guys, I was going to get a firefly2 but since they manage to send their stuff to europe yet I'm leaning towards the Mighy, since it seems to be more realiable than the crafty.
Just have a couple questions:
1- Does anyone has info on internation warranty shiping costs policy? I live in Brazil and i'd like to know if i'd have to pay for shiping in case of defect!
2- I found some uk sellers (namastevapes & greenvapes) selling it for 235 pounds, way cheaper than form S&B. How is it possible? Fake units? Old units? Im atracted by the price but it seems really od! Would love some recomendations for trustworthy uk/europe sellers!

Thank You!
 
cloudsosmoke

cloudsosmoke

Well-Known Member
FYI

i think the same amazon link is giving different sellers at different times
- i spose they must rotate first place

if you look about half way down description at top of page
the words '19 new' is link for all the different sellers
there are 19 different sellers atm

..in other words you might not be talking about same seller
 
blackstone

blackstone

Well-Known Member
Thanks for the recent recommendations on mag/caps, i had fun in initial tests and look forward to more trials!
Amazed they don't come with instructions, and they put Vapormed address on one side and mention the Crafty on the other.
Does anybody know if the capsule magazine is heat/melt proof? Or what temp it's rated for?
It doesn't look to be but I wonder could we drop a hot one in there?
I've used the filling tool while hot/warm before.

WakeAndVape said:
I also like to put small buds in the cooling unit and let THOSE collect the goo.
Click to expand...

Ooh! I like the sound of that, thanks!

Kermitt said:
When the batteries would be changeable, I would buy the Mighty.
Click to expand...

Unlike with some products, they are, by the factory for a fee. Although you probably mean user changeable.
I'm just sort of thankful that this service is available, as I own other nice items which I don't know if the same applies.
I am also slightly hopeful that if battery tech. improved radically in the next few years, S&B could offer a battery upgrade to last more sessions than standard, or maybe that could charge faster too?
I doubt it could affect heat up times much but I'm not fully sure of that, maybe combined with new firmware or programming.

MonkeyTime said:
I bought 2 dispensers and an additional 40 capsules so I have 56 in total. I find them to be extremely convenient, but I loose so much flavor!

Any thoughts or suggestions?
Click to expand...

Try sticking to 4-8 capsules and reusing those over and again?
When I got my 8 capsules and new liquid pads I thought I got some metallic tastes (even after heating the items alone first) that seemed to go away with use.
I just thought if you kept pulling out a fresh new cap, maybe that's what your tasting

Goatpig74 said:
Hello guys, I was going to get a firefly2 but since they manage to send their stuff to europe yet I'm leaning towards the Mighy, since it seems to be more realiable than the crafty.
Just have a couple questions:
1- Does anyone has info on internation warranty shiping costs policy? I live in Brazil and i'd like to know if i'd have to pay for shiping in case of defect!
2- I found some uk sellers (namastevapes & greenvapes) selling it for 235 pounds, way cheaper than form S&B. How is it possible? Fake units? Old units? Im atracted by the price but it seems really od! Would love some recomendations for trustworthy uk/europe sellers!

Thank You!
Click to expand...

Crikey that looks good alright.
(My countries')Namaste are great to deal with and I got a seemingly recent and up to date model 4 months ago from them. The prices on that UK site are 50 UK pounds cheaper than Namaste where I am, and cheaper by about 30 UK pounds than the recently reduced prices from German sites.
It might be explained by volume sales or high competition among vendors over there. Also there might be a tax break there on things that are good for your health, as I know this is the case with motorcycle helmets and safety gear there. Although Vapefiend in UK is also 41 pounds dearer, it's not a huge difference.
I would have no problem snapping that up if I were you! And hope that the shipping to Brazil is reasonable
 
whatitdew

whatitdew

Vapes R Great
@Vifzor take one of the extra fine screens that comes with the mighty ( it's normally for the bottom of the oven) and swap it out with the coarser screen that comes in the cooling unit.

That is the only screen I have changed since buying mine last November. I just soak the cooling unit pieces in 99 ISO leaving the screen in place. Same screen for almost a year now.
 
whatitdew,
newVaper420

newVaper420

Vapor Enthusiast
Ok - so after a bit with the Mighty, I like the capsules but never really use them. I prefer the full pack without the capsule, just my two cents. Secondly, I have not cleaned my cooling unit in a LONG long time. Today, I felt definite resistance. Going to open that bad boy up tonight and see what kind of goo I can script from it and put it in my VapeXNail. LOL.

Still rocking the 380 temp to 390 temps. Nothing higher, nothing lower. Love this thing.
 
MonkeyTime

MonkeyTime

Well-Known Member
newVaper420 said:
Ok - so after a bit with the Mighty, I like the capsules but never really use them. I prefer the full pack without the capsule, just my two cents. Secondly, I have not cleaned my cooling unit in a LONG long time. Today, I felt definite resistance. Going to open that bad boy up tonight and see what kind of goo I can script from it and put it in my VapeXNail. LOL.

Still rocking the 380 temp to 390 temps. Nothing higher, nothing lower. Love this thing.
Click to expand...

Not sure how long you've been using them, but I wasn't sold on them at first other than for convenience. Kept using them for that reason and now I'm really liking them. Love being able to load up a weeks worth on Sunday night. Two dispensers loaded and the rest go into a CVault awaiting their turn.

A request out to S&B, color code some caps! I'd love to be able to load some up full while keeping my regulars at about .07 and be able to tell them apart with out separate storage! That and an @Ratchett loading tool! I know you're working on one!

MT-out!
 
TheMadDabber

TheMadDabber

I ° The Magician
I just wanted to share this with my fuckcombustion family, because I have learned alot here. I was looking for a spacer, instead of using that nasty tasting steel wool and I found the perfect one that has a perfect fit in the mighty. The best part is that tjey have alittle weight to them and they dont get clogged as easily as the metal screens. Its a vaporbrothers ceramic screen and it looks like this.
sez9RB9.jpg
 
MonkeyTime

MonkeyTime

Well-Known Member
TheMadDabber said:
I just wanted to share this with my fuckcombustion family, because I have learned alot here. I was looking for a spacer, instead of using that nasty tasting steel wool and I found the perfect one that has a perfect fit in the mighty. The best part is that tjey have alittle weight to them and they dont get clogged as easily as the metal screens. Its a vaporbrothers ceramic screen and it looks like this.
sez9RB9.jpg
Click to expand...
Ok, gotta ask how you're using it. Do you pack it down and it holds like a standard screen folded over? Does it just sit inside as a spacer like you called it? Love the idea....
 
You must log in or register to reply here.
Top Bottom