The Mighty/Mighty+ by Storz & Bickel

[JJ Cool F]

.. and the bowl will get a little seasoned unless you use a wire basket.

Do you know specifically which baskets fit in the heating chamber?

Edit: Are using baskets in the Mighty?

 

[stickstones]

some users here reported using a MV basket or E cap to keep the bowl clean and increase convection. Correct me if I'm wrong here, guys...

 

[I.b.vaping]

Do you know specifically which baskets fit in the heating chamber?

Edit: Are using baskets in the Mighty?

I should think the small mv baskets will fit..luckily I kept all my accessories from the mv x3 boom, can't wait for tomorrow! Mighty has landed and I've got some train wreck and some girl scout cookies to get through

 

[JJ Cool F]

In keeping with the theme, I'm green with envy.

 

[p1ssbucket]

So you put an extra screen underneath the load? I don't want to make the bowl smaller.

Also how is the best way to clean the cooling unit, put a lot of sessions throug mine but it doesn't look dirty or restricted. It seems fine to me still but right after every load when I'm done I brush off the top screen off from the top part that screws off to keep it clean.

 

[Michel]

Just use ISO and a tooth brush. Rinse with hot water and let it dry. Be careful to not break off mouthpiece or the mighty hologram.

Edit: I tried milk cream for choko shake and there are some biological vaporizer cleaners out there, too, but better not, it's a mess...

 

[I.b.vaping]

Just use ISO and a tooth brush. Rinse with hot water and let it dry. Be careful to not break off mouthpiece or the mighty hologram.

Michel do you use or have you tried a mv basket in the Mighty?

 

[Michel]

There is a justification to use the MV baskets. Kief or smaller bowl size, more convection, but better tamp the material just in the bowl. Even pure kief cleans well if the bowl is still hot. But better not fall asleep...

 

[Stinky]

So you put an extra screen underneath the load? I don't want to make the bowl smaller.

Also how is the best way to clean the cooling unit, put a lot of sessions throug mine but it doesn't look dirty or restricted. It seems fine to me still but right after every load when I'm done I brush off the top screen off from the top part that screws off to keep it clean.

Drop the parts without the o-rings into a Baggie or small container and cover with ISO. Shake it around for about a minute and most of the gunk will extract into the ISO. I then use paper towel and a match stick to get to the hard to reach places. I can clean the entire CU in 3 minutes this way.

 

[p1ssbucket]

Drop the parts without the o-rings into a Baggie or small container and cover with ISO. Shake it around for about a minute and most of the gunk will extract into the ISO. I then use paper towel and a match stick to get to the hard to reach places. I can clean the entire CU in 3 minutes this way.

Do you wash it or just let it evaporate? I always wash things with water after ios washing them because the awful ISO smell lingers.

 

[Michel]

I realized some tend to just overread my posts constantly if I'm answering their questions, but since there are other people reading and eventually enjoying the information:

The o-rings are ISO-proof, don't worry.

Edit:

Just Rinse with hot water and let it dry.

 

[WakeAndVape]

My biggest issue with the might (and crafty for that matter) is that unless I use the oil pad as an additional screen, the cooling unit loves to collect particles...is there anything I can do to prevent that?
I was thinking of using my glass flowers from the ascent, but there has got to be a better way

 

[Stu]

My biggest issue with the might (and crafty for that matter) is that unless I use the oil pad as an additional screen, the cooling unit loves to collect particles...is there anything I can do to prevent that?
I was thinking of using my glass flowers from the ascent, but there has got to be a better way

I switched over to the finer mesh screens that came with the unit and my CU has less particle residue as a result. Give it a shot!

 

[WakeAndVape]

I switched over to the finer mesh screens that came with the unit and my CU has less particle residue as a result. Give it a shot!

Thanks for the suggestion, I've heard others say the smaller screens create draw resistance...hhas this been accurate with your experience?

I'm thinking something like this would work great for the crafty

 

[Stu]

I've heard others say the smaller screens create draw resistance...hhas this been accurate with your experience?

It has not. I can't tell the difference in draw resistance, but ymmv.

Edit: I'm almost always vaporbonging, so that might make a difference.

 

[WakeAndVape]

It has not. I can't tell the difference in draw resistance, but ymmv.

Edit: I'm almost always vaporbonging, so that might make a difference.

Extreme q whip correct??? I need to get my hands on one, I'm dying to hook it up to some glass! I'll try the small scren too

 

[Stu]

Actually, I use a silicone adapter that @Ratchett made for me.

 

[WakeAndVape]

@Stu I feel totally left out... is @Ratchett sellingg these?...nevermind a magical search on a thing called Google showed me the way ...thanks for all of your 'mighty wisdom'

 

[p1ssbucket]

So silicone whip is best choice for running this bad boy through a pipe? That is too bad and I hope s&b releases a silicone free WPA soon as my lungs are getting a bit dry from all this mighty use.

 

[I.b.vaping]

Dammm it! All that lies between me and the mighty is a full days work! Then party time

 

[JJ Cool F]

Dammm it! All that lies between me and the mighty is a full days work! Then party time

Patience, young Jedi.

 

[Viskuld]

Hi. I come back to talk about the problems I have with my Mighty.

I received the Mighty two weeks ago.
I used it the first time with full charge of weed at 180°. At first I was pleased about the effect and the taste, but quickly I got a sort of pressure on the thorax. It feels like strong anxiety. I felt a small lungs pain too at the beginning (it maked me worried)

Because of that, the day after with the chest pain hitting hard I went to a doctor and told him everything. He said it was anxiety. I did a lungs radio to be sure, it was alright.

I took 10 days of without smoking or vaping anything for it to calm down.

I retried yesterday with a really small amount of weed because I thought it could have been too strong the first time, at 160°. It feels the same way, but less agressive, then it passed. In the night it felt a bit like I wanted to throw up and today I just feel a pressure on my chest, but I dont feel anxious. No lungs pain.


What do you think ? Is it me who am too worried about the Mighty ?

The strange thing is that I used an Imag+ two weeks before the Mighty and I never felt the chest pain or anxiety, just the lungs effects (but I think it’s about the temperature)

Could it be that I vap too much the weed, after the weed became brown and it hurt me ?

I’m too sad that I can’t use the Mighty properly :’(

 

[Michel]

very sry to hear that, sry I can't help you, too. Can't imagine what is wrong, apart someone saying there are remains from the production process with a heavy plastic taste or something like this. I personally can feel the mighty hitting my lungs harder than the volcano, but the abv can't be compared on 200'C. Perhaps someone has an idea? Water tools?

 

[adam_baumm]

Hello Viskuld, I hope your feeling better. My view from what you had said is it may be anxiety. What kind of weed? Indica or sativa? Maybe try a different strain of weed. Or smoke a little in a pipe or joint and see if you get same effect. Best wishes to you.

 

[Viskuld]

I don't know if it's indica or sativa but I've smoked this weed before getting the Mighty and it was alright :/

Thank you both of you for you concern, I hope I will be able to use it normaly, but I don't know how.