ginolicious
Well-Known Member
I was watching a live stream of George at vape fiend and they have been going off about a mighty plus. They mentioned they think it’ll come out for Black Friday for before Christmas.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Does that mean they are glad or have they seen it and are angry...like I was with the Crafty+ at being a half-assed upgrade, not even USB-c FFS!
Thick Vape
In the Ballpark
I agree the Crafty+ is just what the Crafty should have been.
But I would not mind having that 2-push and 3-push functionality on the Mighty too.
I would also appreciate some usb charging on the Mighty. All those different chargers nowadays are a PITA.
But I would not mind having that 2-push and 3-push functionality on the Mighty too.
I would also appreciate some usb charging on the Mighty. All those different chargers nowadays are a PITA.
Warpdrive
Well-Known Member
I deal with people in another hobby that uses 18650s and other rechargeable batteries for devices similar to ours. Charging takes a toll on all batteries. As much as it may seem crazy to not upgrade the Crafty+ to USB C charging, S&B is more than likely to be just looking at making sure that your non remove able battery device won't have a battery lose it's charging capacity too quickly like USB type C would do on a Crafty+. They even extended their warranty an extra year. That almost confirms their thoughts to me.
And for those who do use 18650s here or other replaceable batteries for vaping, please always think of battery safety first. Never put a 18650 battery naked in your pocket. Always use a battery case when traveling with your batteries. If you don't have any cases please visit an e-cigarette vape shop or go online to IMR or LIION to get a case or two.
And for those who do use 18650s here or other replaceable batteries for vaping, please always think of battery safety first. Never put a 18650 battery naked in your pocket. Always use a battery case when traveling with your batteries. If you don't have any cases please visit an e-cigarette vape shop or go online to IMR or LIION to get a case or two.
That explains the 12v fast charge option and 'pass thru' on the Mighty.
ginolicious
Well-Known Member
I doubt they will ever have removable batteries. Just doesn’t seem like an S&B thing. Plus pretty sure it has to do with some sort of safety and regulations as they built in Germany right.
it won't happen, but the best change would be allowing it to go to 446F, just like the Volcano.
Thick Vape
In the Ballpark
Then I want an old one. Those brushes are so handy.Don't forget that that they will remove the cleaning brush too
neverforget711
Well-Known Member
Warpdrive
Well-Known Member
Puffitup dot com or planet of the vapes
They will take good care of you
Thick Vape
In the Ballpark
I use these and I break them from time to time. They are not perfect but work fine.
and yes PuffitUp has something similar and different WPA's.
www.vapowelt.de
and yes PuffitUp has something similar and different WPA's.
Vapowelt AquaVape³ Wasserfilter günstig kaufen | VAPOWELT® Vaporizer Shop - Beste Vaporizer kaufen bei VAPOWELT® - bester Vaporizer-Shop Deutschlands: tragbare Vaporizer, tragbare Verdampfer, Desktop-Vaporizer und vieles mehr.
AquaVape³ Wasserfilter mit 14er-Schliff. Dieses Zubehör ist ein Muss für alle, die unsere verschiedenen Vaporizer mit zusätzlicher Effizienz und Leistungssteigerung nutzen wollen. Der Wasserfilter ist aus hochwertigsten Borosilikatglas gefertigt und sorgt dafür dass der Dampf noch kühler und...
Green Kiwi
Well-Known Member
Congrats on your excellent choice
!the safest (flexible so not putting stress on the housing...)are afaik, Delta3 studios adaptor .
If you go back in this tread you will find more info about them.
I have a crafty+ in my life since a few months(after being on mighty 's since they came out)and I really, really, like it al lot. It's a superb vape to have on you when out and about.
Ha's anyone else also noticed the air holes in the bowl are slightly larger dan in the original mighty bowl?
I think this is also why the airflow has improved even further than the already free flowing Mighty.
.Very different than some of the "mighty haters"whom can't help themselves and need to keep bashing on it, I'm really looking forward to the Mighty+ which I don't doubt wil be a further improvement on this already asome vape
.
Warpdrive
Well-Known Member
This is my first Crafty the +, and I'm loving it. Amazing outdoors by the beach or the woods with dosing caps so I have a better experience outside. Inside I over fill it natively without caps. For my poorer lungs it's better than a Tera on my water pipe. My Runt is my best friend and lover tho, just saying 
kushkush
happy camper....
I'm on about page 423 and having fun reading thru the thread. There was talk of a Mighty 2 or + but I wouldn't do that if I were S&B. Making a Mighty 2 would imply that The Mighty was inferior. And it's not. It's pretty much perfect I would say. Really enjoying using the capsules. I made my very first 'sandwich' with herb/concentrate/herb and it was delightful. Unbelievably good. And what's really nice is the capsule is still as clean as can be. I vape pretty steady at about 185, and get 2 to 3 heatings with each capsule.
I wanna know the truth. Is there anyone here that plugs the Mighty in, then the wall plug, and then unplug the Mighty, then the wall plug? Really?
I wanna know the truth. Is there anyone here that plugs the Mighty in, then the wall plug, and then unplug the Mighty, then the wall plug? Really?
HomerSchwag
Well-Known Member
I wanna know the truth. Is there anyone here that plugs the Mighty in, then the wall plug, and then unplug the Mighty, then the wall plug? Really?
I’ve been doing it since day 1 in April 2015, not every single time, but most. I don’t leave the charger plugged in when not in use, and if S&B somehow thinks this is the ideal way to charge the device, then I will go with their instructions. All I know is that my device is still going strong after 5 1/2 years, battery is maybe 50% of the original capacity.
Shit I don’t know why my reply posted inside the quote, can’t figure out how to fix, sorry.
ginolicious
Well-Known Member
I'm on about page 423 and having fun reading thru the thread. There was talk of a Mighty 2 or + but I wouldn't do that if I were S&B. Making a Mighty 2 would imply that The Mighty was inferior. And it's not. It's pretty much perfect I would say. Really enjoying using the capsules. I made my very first 'sandwich' with herb/concentrate/herb and it was delightful. Unbelievably good. And what's really nice is the capsule is still as clean as can be. I vape pretty steady at about 185, and get 2 to 3 heatings with each capsule.
I wanna know the truth. Is there anyone here that plugs the Mighty in, then the wall plug, and then unplug the Mighty, then the wall plug? Really?
Just because a 2.0 comes out doesnt necessarily mean the Mighty was an inferior vape in the industry. Just makes a really damn good vape even better. May it be changing a few things to allow quicker heat up time, better flavour, etc.
blackstone
Well-Known Member
I think a Mighty+ is delayed because of current conditions. It reminds me of this new handheld CB radio from President that shows to be 'coming soon' for quite a while. There's no other obvious reason why that CB would be delayed so long, and it appears people are searching google for a release date for that.
S&B seem to have learned some lessons from the pre-covid Volcano Hybrid release issues, and may have decided it would be unwise to proceed currently.
I am also open to the possibility that they could stick with the current line up and not do a Mighty+, as they now have most bases covered, but as I have shown here previously, they (under Stobi GMBH) did register the name Mighty+ as a trademark around the same time as the Crafty+ name. Along with other uses of the name and website placeholder titles etc.
I don't know if I'll ever get that CB radio, but if I'm sitting somewhere with it one day, with a Mighty+ I will smile and think of all the waiting patterns and global problems we were in one time.
It's close to perfect vapor production and quality, but unfortunately (in my experience anyway) the plastic cracked each time around the bowl top after about two years of my use. The Crafty+ boasts new improved housing material, and if it works, I'd like that on a Mighty/+.
Also they got the Crafty+ heating around 20% faster than before and that is now faster than a Mighty, a new Mighty has the potential to be even quicker again and I might like this.
There is an increased punch to the vapor in a Crafty+ from the new element placement and a new Mighty could do even more than this if needed.
And by making a Crafty+ they may have admitted that the Crafty was inferior, but it didn't stop them going ahead with it. So it still may be possible!?
I also did it a lot and started doing it with my phone and tablet. I believe, besides arcing on the connections of the high current load which was the most common assumption for the instruction, it avoids a fire risk (think wire wool on a battery, and they do supply SS wire wool pads in the box too) and it might avoid the user getting a false charging signal, like when unplugged it would show the residual power initially and you think it's charging?.
S&B seem to have learned some lessons from the pre-covid Volcano Hybrid release issues, and may have decided it would be unwise to proceed currently.
I am also open to the possibility that they could stick with the current line up and not do a Mighty+, as they now have most bases covered, but as I have shown here previously, they (under Stobi GMBH) did register the name Mighty+ as a trademark around the same time as the Crafty+ name. Along with other uses of the name and website placeholder titles etc.
I don't know if I'll ever get that CB radio, but if I'm sitting somewhere with it one day, with a Mighty+ I will smile and think of all the waiting patterns and global problems we were in one time.
I'm on about page 423 and having fun reading thru the thread. There was talk of a Mighty 2 or + but I wouldn't do that if I were S&B. Making a Mighty 2 would imply that The Mighty was inferior. And it's not. It's pretty much perfect I would say. Really enjoying using the capsules. I made my very first 'sandwich' with herb/concentrate/herb and it was delightful. Unbelievably good. And what's really nice is the capsule is still as clean as can be. I vape pretty steady at about 185, and get 2 to 3 heatings with each capsule.
I wanna know the truth. Is there anyone here that plugs the Mighty in, then the wall plug, and then unplug the Mighty, then the wall plug? Really?
It's close to perfect vapor production and quality, but unfortunately (in my experience anyway) the plastic cracked each time around the bowl top after about two years of my use. The Crafty+ boasts new improved housing material, and if it works, I'd like that on a Mighty/+.
Also they got the Crafty+ heating around 20% faster than before and that is now faster than a Mighty, a new Mighty has the potential to be even quicker again and I might like this.
There is an increased punch to the vapor in a Crafty+ from the new element placement and a new Mighty could do even more than this if needed.
And by making a Crafty+ they may have admitted that the Crafty was inferior, but it didn't stop them going ahead with it. So it still may be possible!?
HomerShwag said:
I also did it a lot and started doing it with my phone and tablet. I believe, besides arcing on the connections of the high current load which was the most common assumption for the instruction, it avoids a fire risk (think wire wool on a battery, and they do supply SS wire wool pads in the box too) and it might avoid the user getting a false charging signal, like when unplugged it would show the residual power initially and you think it's charging?.
MonkeyTime
Well-Known Member
Big shout out to Andrew and the PIU team! As usual, their CS had been outstanding!
I've been eyeing the official SB capsule filling set for some time after picking up the first Delta3D set. I have about 60 capsules and fill 30-40 at a time when the Mighty is in that weeks rotation. USPS lost the first open box set I bought and they threw in extras for the inconvenience, which want their fault and I want feeling.
Felt the need to pick up a new HT just because, should be a fun week!
I've been eyeing the official SB capsule filling set for some time after picking up the first Delta3D set. I have about 60 capsules and fill 30-40 at a time when the Mighty is in that weeks rotation. USPS lost the first open box set I bought and they threw in extras for the inconvenience, which want their fault and I want feeling.
Felt the need to pick up a new HT just because, should be a fun week!
namasteIII
Well-Known Member
Anyone with a newer mighty also have this bar in the heater?
Just received warranty replacement from a 2 year old unit and that bar definitely wasn't there on my old one.
Just received warranty replacement from a 2 year old unit and that bar definitely wasn't there on my old one.
arb
Semi shaved ape
Not on any of mine from 2018.
Does that screen come out?