The Mighty/Mighty+ by Storz & Bickel

Baron23

Baron23

Well-Known Member
bbY1VCJ.jpg


IO9iuJ9.jpg
 
Baron23,
woppa

woppa

Member
What is the best way to hit the mighty?

long and hard
long and soft
short and hard
short and soft
 
woppa,
vapviking

vapviking

Old & In the Way
woppa said:
What is the best way to hit the mighty?

long and hard
long and soft
short and hard
short and soft
Click to expand...
What? No medium?
Medium and medium; that would be my choice.

But seriously, I think everybody's way has to be what works best for them, with adjustments for strain, temperature, water tool use and other such variables.
 
arthritisbites

arthritisbites

Well-Known Member
Hi everyone, I’ve been on FC a few weeks on the Volcano board, and I just got my mighty and used it the first time today...I’m seriously considering burning my pax3 in effigy. What a difference! A portable vape that doesn’t leave me with burnt fingers and lips? It’s a miracle!

So what are your fave tips and tricks for the mighty? I’m experimenting with using both flower and concentrate at the same time - or is it better to do those separately? And if I’m using kief, do I need to squish it or anything so it doesn’t go through the screens?
 
Baron23

Baron23

Well-Known Member
woppa said:
What is the best way to hit the mighty?
Click to expand...

I prefer with thigh high boots, bustier and a nice whip.

How do you like to hit yours?

Sorry, couldn't resist.

The Might is almost immune to user error. Draw anyway you want and you will get good vapor, IMO.

arthritisbites said:
Hi everyone, I’ve been on FC a few weeks on the Volcano board, and I just got my mighty and used it the first time today...I’m seriously considering burning my pax3 in effigy. What a difference! A portable vape that doesn’t leave me with burnt fingers and lips? It’s a miracle!

So what are your fave tips and tricks for the mighty? I’m experimenting with using both flower and concentrate at the same time - or is it better to do those separately? And if I’m using kief, do I need to squish it or anything so it doesn’t go through the screens?
Click to expand...

Things I like to do...well, I like to top a flower load in the native oven with a liquid pad. I think it adds just a touch more conduction for very full extraction.

I use dosing capsules for flower-trates-flower sandwiches. Bit more herb on top than bottom as trates run from heat, set to 410, and go for it.

Hope this is helpful.
 
Last edited:
woppa

woppa

Member
arthritisbites said:
Hi everyone, I’ve been on FC a few weeks on the Volcano board, and I just got my mighty and used it the first time today...I’m seriously considering burning my pax3 in effigy. What a difference! A portable vape that doesn’t leave me with burnt fingers and lips? It’s a miracle!

So what are your fave tips and tricks for the mighty? I’m experimenting with using both flower and concentrate at the same time - or is it better to do those separately? And if I’m using kief, do I need to squish it or anything so it doesn’t go through the screens?
Click to expand...

Maybe starry > pax, but I don't find the diff to the mighty 2x 3x better than my starry. Vapor is smoother, lighter, and tastier for sure, but so far in my experience the high from the starry lasts longer than the mighty with the same amount of herb.

I need to experiment with the mighty more to get the best potency. I'm packing in about 0.15g to 0.2g fine grind in the capsule.
 
arthritisbites

arthritisbites

Well-Known Member
Baron23 said:
I use dosing capsules for flower-trates-flower sandwiches. Bit more herb on top than bottom as trates run from heat, set to 410, and go for it.
Click to expand...

Yes, super helpful, because I was doing the opposite, putting more herb on the bottom because I was scared of the concentrate leaking through. Switched it around per your advice and got much better vapor, thank you for being so specific!
 
woppa

woppa

Member
Now I think I know why the starry high lasts longer than the mighty high.

A member @luchiano said this. Dude seems to really know his shit:

I then realized you hit the wall if your blood sugar is low, which happened to me because I was always working out off of low food intake. Over the years, I also realized how you puff effects if you hit the wall or not. When we inhale a thick cloud, we are activating our sympathetic nervous system a lot, and this uses up the sugars in our bodies. This is why you get the rush, the thicker the cloud is. The bad thing about this is, every time you take a thick cloud puff you lower your chances of getting higher, and higher. The way to combat this is to use small amounts of herb, and adjust the temperature in increments on each inhale, to the point where there is barely a cloud. This allows the lungs to think regular air is going into the lungs, so it will stay in parasympathetic mode, as long as you breathe through your nose. This mode deals with digestion, rebuilding/healing of the body, and relaxation. When you ingest cannabis with food, you are activating this parasympathetic nervous system, and as long as you have good blood circulation, you will just keep getting higher, and higher. If your circulation isn't the best, just go for a walk or a jog, and this should help speed things up.

An analogy is walking for 5 miles vs. running. If you walk for 5 miles, you will have less of a chance of feeling worn out, as opposed to running as fast you can. When you walk, your parasympathetic nervous system is dominant, and it uses mostly fat for energy so it can go for a long time before giving up. When you run you use up sugars, and they get used up fast. This is why you feel so drained after running real fast for a short amount of time, as opposed to walking for a long time.

Now, the real secret is making use of both of them. Since we vape, we are able to do this, because we are able to control how much of each effect we want. For example, to get the rush at a beginning of a session, you can make a thick cloud to get your body going, then on the next bowl you load, you use very little, start at a low temperature, and raise the temperature in 10 degree increments until you get to around 420f. You then load another small bowl, and raising the temperature 10 degrees each for each puff. Keep doing this, until you eat a meal with some carbohydrates to replenish your blood sugar. You then start he process all over again, so you can get the rush again, until you are done.
Click to expand...

http://fuckcombustion.com/threads/maintaining-the-high-you-want.9503/page-2


This is similar to my experience so far. The mighty gives off huge clouds at the first few draws then tapers off, whereas the starry produces constant low-medium vapor throughout the session.

So the mighty is sending my brain into sympathetic mode, but starry keeps me in parasympathetic because my brain thinks it's regular breathing. Starry is the 5 mile walk, mighty is the 100m sprint.

I'll try the long and slow method, breath out with nose, and try to mimic regular breathing.

Perhaps big clouds when vaping is not a good thing then?
 
Last edited:
arthritisbites

arthritisbites

Well-Known Member
@Ratchett I want to use my mighty with my water pipe, and it looks like you have two options - One that replaces the cooling unit and one that fits on the mouthpiece. Are there pros or cons to one or the other? I’ve purchased some of your pieces before and was very impressed!

Anyone else have something they like?
 
arthritisbites,
Delta3DStudios

Delta3DStudios

Well-Known Member
Accessory Maker
arthritisbites said:
@Ratchett I want to use my mighty with my water pipe, and it looks like you have two options - One that replaces the cooling unit and one that fits on the mouthpiece. Are there pros or cons to one or the other? I’ve purchased some of your pieces before and was very impressed!

Anyone else have something they like?
Click to expand...

Happy to hear you like what you've seen on my store so far! I've got a lot more planned for the future :science:
(Including a few new special widgets for the Mighty :ninja: )

This is my latest and greatest WPA for the Mighty - https://delta3dstudios.com/mighty-v3-waterpipe-adapter/ It replaces the Cooling unit to help give you the biggest rips possible from the Mighty. (I suggest using a Dosing Capsule for increased efficiency and spill-prevention)

Alternatively for someone looking for the smoothest hit possible, you can use one of these Nearly Universal adapters ( https://delta3dstudios.com/nearly-universal-vape-to-waterpipe-adapter-medium/ ) to fit over the mouthpiece of the vape. This means the vapor will first flow through the cooling unit prior to entering the waterpipe, which will yield an extremely smooth hit regardless of the temperature (almost too smooth in my personal opinion).

Sorry for the radio silence lately all, I've got a few things nearly ready to publish for the Mighty (and Crafty), but I'm waiting until I have all the new machinery installed and calibrated before I start selling a bunch of new gadgets! :sherlock: :worms: :evil:
 
woppa

woppa

Member
What is the preferred method with the dosing capsules to get the most potency?

A. Pack 0.2g tight into one capsule.
B. Pack 0.2g loose into two capsules (2 x 0.1g), then vape both capsules in one session.
 
woppa,
  • Like
Reactions: BigJr48
arthritisbites

arthritisbites

Well-Known Member
Anyone looking for a case for the mighty? I accidentally discovered a great cheap one! It’s not smell proof, but it will definitely protect the mighty from bumps. It’s technically a pencil case, but it fits perfectly! Got it on Amazon for $9!

https://smile.amazon.com/gp/aw/d/B01MRYG8BU?psc=1&ref=yo_pop_mb_pd_title

I still haven’t figured out how to post a picture on here, but if someone can help me with that I’m happy to post a photo of my mighty in the case.
 
arthritisbites,
  • Like
Reactions: Fat Freddy
BigJr48

BigJr48

Well-Known Member
woppa said:
What is the preferred method with the dosing capsules to get the most potency?

A. Pack 0.2g tight into one capsule.
B. Pack 0.2g loose into two capsules (2 x 0.1g), then vape both capsules in one session.
Click to expand...

I over fill mine and put the lid on, the cooling unit will tamp it shut.
 
H

HushemFlupskluk

Well-Known Member
woppa said:
What is the preferred method with the dosing capsules to get the most potency?

A. Pack 0.2g tight into one capsule.
B. Pack 0.2g loose into two capsules (2 x 0.1g), then vape both capsules in one session.
Click to expand...
Most potency IMO is in one filled capsule but it weighs more a little over 0.3g. Usually I have enough after a few draws so I modified one capsule with a liquid pad inside. On top of the pad a large screen and inside the capsule cover a large screen aswell. It holds about 0.075g - 0.125g. The screens in the capsule will hold the fine grind inside mostly. If I would use only fine screens this would reduce the air flow.
 
You must log in or register to reply here.
Top Bottom