mitchgo61
I go where the thrills are
Email Randy at PuffItUp. He often matches the best prices and his service is excellent. Randy@puffitup.com. Tell him you're an FC member.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Email Randy at PuffItUp. He often matches the best prices and his service is excellent. Randy@puffitup.com. Tell him you're an FC member.
cloudsosmoke
Well-Known Member
@rodders83
i only recently got some crafty 'fine screens' from S&B
thats what it says on the bag
..but youre right - they dont have them on their website anymore
(crafty or mighty)
..but i think maybe there were only ever two types..
so that would mean all that happened was they recently renamed them from fine to normal
and - like you say - thats what they look like
on a completely useless note ..you can get x6 'coarse screens' on vapormed
@Techn!d0n
re buying mighty
you can go direct to S&B - they have great (but completely uncommunicative) warranty service
if thats all you want
if you want progress reports someone mentioned recently maybe a good vape shop would have a regular contact at S&B who will talk to them so then they could update you
(edit : see comment above)
i only recently got some crafty 'fine screens' from S&B
thats what it says on the bag
..but youre right - they dont have them on their website anymore
(crafty or mighty)
..but i think maybe there were only ever two types..
so that would mean all that happened was they recently renamed them from fine to normal
and - like you say - thats what they look like
on a completely useless note ..you can get x6 'coarse screens' on vapormed
@Techn!d0n
re buying mighty
you can go direct to S&B - they have great (but completely uncommunicative) warranty service
if thats all you want
if you want progress reports someone mentioned recently maybe a good vape shop would have a regular contact at S&B who will talk to them so then they could update you
(edit : see comment above)
verdampersweats
Well-Known Member
@cloudsosmoke winner winner! It is indeed a mixup fine and normal are the same so they just got rid of the fine branding to fix that... Weird they sold it like that for so long without realising lol. Panic over back to defcon 5.
verdampersweats
Well-Known Member
Hmm what about keeping a Jyarz Classic filled with the ground material? Grind it at home an fill it and simply dip and shake. Or you could look for tweezers in Stainless Steel and use it to hold the capsule and dip and shake.
You could easily keep a tweezer and bud inside a Jyarz classic and fill away. Heck if you used kief you could pack in more than a battery could ever vape in one go i reckon, Or that one man could handle. I wanna see someone vape an entire classic filled with kief in a day!
You could easily keep a tweezer and bud inside a Jyarz classic and fill away. Heck if you used kief you could pack in more than a battery could ever vape in one go i reckon, Or that one man could handle. I wanna see someone vape an entire classic filled with kief in a day!
Those are some good ideas...Thank you. I'm wondering if S&B has any instructions, or if anyone in here has come up with a better way than just filling them one at a time.
greenmunster
Well-Known Member
How many capsules are you trying to fill at once?
Eatrocks
Well-Known Member
I use the jyarz classic to fill the mighty chamber, it's the right size to do so in just a few seconds. Shoo...the classic will hold about a 8th ground up and pressed down.
cloudsosmoke
Well-Known Member
lm using this cigarette case to store caps
its easy open - not a fiddly catch
and you can see if you look carefully at pic flying on the top left.. inside its got a sort of metal er.. pouch
- that means they dont fall out when you open it
the caps slide freely in and out under it
when lid is closed they cant accidentally open
its quite solidly constructed ..so far
im finding it better than magazine for stealth
because it can be opened.. capsules swapped.. and closed
all quite quickly
no screwing involved
i like the idea of re-purposing combustion accessories for vaping - seems right somehow
someone posted pics of an old tobacco pouch
used as smell proof carry case for crafty - looked good to me
its easy open - not a fiddly catch
and you can see if you look carefully at pic flying on the top left.. inside its got a sort of metal er.. pouch
- that means they dont fall out when you open it
the caps slide freely in and out under it
when lid is closed they cant accidentally open
its quite solidly constructed ..so far
im finding it better than magazine for stealth
because it can be opened.. capsules swapped.. and closed
all quite quickly
no screwing involved
i like the idea of re-purposing combustion accessories for vaping - seems right somehow
someone posted pics of an old tobacco pouch
used as smell proof carry case for crafty - looked good to me
Last edited:
WakeAndVape
VapeLife X
I'm sure you can line them up on a tray and dump herb over the top...cap and clean up the extras?
I thought about that, but there's got to be a better way. Calling DDave...we need your genius mind!
Last edited:
vapviking
Old & In the Way
Have you tried the funnel lid of the magazine?
After a few tries at other methods and,
At risk of stating the obvious:
I grind up a bunch of material and work out of the grinder.
Lay out as many caps as you'll want on a table, open side up. Take the mag lid funnel and place on top of one. Use small spoon (ss infant spoon, for me) to 'measure' out a caps' worth and place it in the cap --some will spill onto funnel top; push it in to cap and pack lightly with finger. Lift the funnel off and place it on next empty cap. Pick up a lid an place it squarely atop the filled cap. Visually check that lid is seated well as you put it in storage container. I use the magazine and sort different strains into multiple magazines.
This filling method may sound involved, but I've got it down to just a couple of minutes to fill 8 caps. I think filling a cap takes less time than reading this description! Almost no cleanup, since there's no overspill. Hands even stay pretty clean.
This is, btw, more or less the S&B prescribed method. And how much to put in? However much your doctor prescribes!
Dosing caps have, for me, become a good budgeting tool lately as there's been an 'interruption' in supply.
ps. For opening spent caps: regardless of how you grip one, try to ensure that the light gripping pressure applies closer to bottom of cap. The cap's bottom can take some light pressure without caving in like the sidewalls will. If you find resistance as you try to pry the lid off, rotate the cap and look for an easy spot; there almost always is one that will give way easily. If not, reheat a little to loosen resin and try again.
Anyone still using magic eraser on their Chamber? Anyone gotten sick from it? Not that I have, but just checking. I throughly clean after wards. I Haven't used it on my Mighty in a while.
Edit: thanks @Vapor King
I suggested the magic eraser for the chamber on another forum and I got a response that pretty much meant don't use magic eraser.
Edit: thanks @Vapor King
I suggested the magic eraser for the chamber on another forum and I got a response that pretty much meant don't use magic eraser.
Last edited:
Vapor King
Well-Known Member
WakeAndVape
VapeLife X
Me either...
Mr. Me2
Well-Known Member
This sounds like a job for... @Ratchett. I'll bet he could design and print something. You may want to pm him.
I'm guessing you'd like to fill 8 at once. For aid in filling one at a time, you may want to try a salt spoon (if you're not familiar, search eBay, but it's basically a miniature spoon). Very handy tool. I have several and use them all the time.
Vapor King
Well-Known Member
Why not use the loading tool they come with?? Won't load 8 at a time but will do one at a time....8x
adam_baumm
Well-Known Member
I just use a coarse green scrub pad from dollar store.
Cut a 1 inch square and fold up.
Dip in some iso and turn it around in there many times upside down.
Then whipe clean with paper towel.
HellsWindStaff
Dharma Initiate
Just used the magic eraser the other day, I do always run it dry after I use it to burn off anything, but no problems and doesn't impart any weird taste, count me in the A-ok book!
vapviking
Old & In the Way
There are two cautions that I know of about magic erasers.
One is the concern that some amount of the eraser (melamine) may rub off, especially if rubbed against the screen.
Second is a concern about additives in the eraser, like the detergent or whatever that stuff is that you find in a new sponge (and of course you definitely don't want the ones that say they have added detergents). I've found that a lot of magic erasers have some of that milky kind of stuff in and I don't feel good about using those, even after rinsing well. I've been liking Mr. Clean Extra Power (stronger) and give them a good rinse before use. I don't perceive any weird stuff coming out when they're rinsed.
So, I try not to rub hard on the screen, though I don't feel that any eraser is rubbing off anyway. And I try to use Erasers without perceived additives, since some may have unmentioned additives.
But I do use them! With either alcohol or sometimes just water. I use a small piece and use the butt end of the brush to rub it round the chamber.
sanfranciscosadhu
Well-Known Member
I find that when using the dosing capsules the bowl itself stays super clean, shiny in fact. Definetely no need for a magic eraser anymore.
I was lucky as I recently upgraded to a brand new Mighty after the warranty on the Crafty almost ran out. Have been using it almost exclusively for several weeks and the bowl still shines as if it just came out of the box thanks to the dosing capsules.
I was lucky as I recently upgraded to a brand new Mighty after the warranty on the Crafty almost ran out. Have been using it almost exclusively for several weeks and the bowl still shines as if it just came out of the box thanks to the dosing capsules.
The Mighty has landed!!! I just received my MY upgrade replacing a 30ish hour crafty that I loved while it was charged, which just wasn't long enough. I have it plugged in now, I am assuming step one should be to replace the cooling unit screen with the finer version?
They also included a dosing capsule which seems to have gotten a little squashed in transit, going to try to rebuild it a bit before testing.
They also included a dosing capsule which seems to have gotten a little squashed in transit, going to try to rebuild it a bit before testing.
verdampersweats
Well-Known Member
@sanfranciscosadhu I am in the same boat i never used mine when i got it for xmas 15 as i just never toked outdoors in the cold and then they released caps just in time for summer so i get to keep a nice clean bowl. What worries me is will it come back from the eventual RMA like this!
And @matthend send a pic or tell them they will send a replacement even if it meant sending a capsules holder thingy and using ups i will bet they will do it. I was missing the plastic plug on my filling tool and they did that. They might be tight on the warranty but not so in these types of cases i believe? anyone had a bad word to say here?
And @matthend send a pic or tell them they will send a replacement even if it meant sending a capsules holder thingy and using ups i will bet they will do it. I was missing the plastic plug on my filling tool and they did that. They might be tight on the warranty but not so in these types of cases i believe? anyone had a bad word to say here?
subway13029
Well-Known Member
My mighty was missing the orane tool on the bottom and i emailed them and they sent me a pack of 5..so always been decen with me.