The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
adam_baumm
Well-Known Member
Here's a pic of my black box, it was for some crap mic I pad 11 dollars for (mic /cable and case) and I have a Extreme Q balloon kit glass piece attached to the Mighty with a 1 inch piece of the whip.
I always start out low, but end up high, in more ways than a mere temp setting. I can't take, say, 410 F right away. Too many cannabinoids at once: my lungs shred. But after 360 for a set, I raise it up to 385- 400 to finish. Less coughing for me.
Vapetrees
Vaped Out
Yes! I've noticed this with my other vapes as well. I also like doing that because I like to taste the herb
StonedPerk
Light up the world
If anybody needs any 14mm specially made adapters for crafty and mighty made on the 3d printers at namastevapes. Namaste vapes has their own line of glass water attachments along with their very own 14mm adapters so head over to the site if you don't see it contact kory.
mixchu69
Well-Known Member
Buy water adapter for the mighty/crafty from ratchett instead of namaste vapes. It's cheaper and We should support our FC family.
too bad its not a glass adapter
Massey64
Well-Known Member
Apologies if this has already been answered but I can't seem to find anything by searching.
Those who have bought silicone tubing what diameter is necessary to fit the mouth piece? The majority of tubing I find says it has 4mm internal diameter which I cant believe would fit the mighty but then I see people using their mflb whips?
I haven't got any glass to hook my mighty up to but I'd like to
Get creative with some home made solutions, was thinking of making something comparable to the mflb UFO as no one in the UK seems to stock them
Those who have bought silicone tubing what diameter is necessary to fit the mouth piece? The majority of tubing I find says it has 4mm internal diameter which I cant believe would fit the mighty but then I see people using their mflb whips?
I haven't got any glass to hook my mighty up to but I'd like to
Get creative with some home made solutions, was thinking of making something comparable to the mflb UFO as no one in the UK seems to stock them
I.b.vaping
Well-Known Member
I use the extreme q whip! With the glass elbow...Apologies if this has already been answered but I can't seem to find anything by searching.
Those who have bought silicone tubing what diameter is necessary to fit the mouth piece? The majority of tubing I find says it has 4mm internal diameter which I cant believe would fit the mighty but then I see people using their mflb whips?
I haven't got any glass to hook my mighty up to but I'd like to
Get creative with some home made solutions, was thinking of making something comparable to the mflb UFO as no one in the UK seems to stock them
Massey64
Well-Known Member
My only other vape is a mflb so I don't have one lying around
could you give me a rough idea of the dimensions for the extreme q whip? Seems a bit pointless to pay £10/15 for a branded piece of tubing I can get off eBay at £2 a metre!
5/16" I.D., 7/16" O.D. Source.My only other vape is a mflb so I don't have one lying around
Vapetrees
Vaped Out
So I managed to get the vaporizer from vapefiend in the UK and since they have free shipping and the conversion rate from british pound to US dollar, I was able to get the Mighty for 306 shipped to me. I bought a UK to US adapter and am awaiting arrival of it. I somehow managed to get the vaporizer for 198 british pounds even though it was listed at 238 pounds.
grokit
well-worn member
Fucker! That's less than I paid for my crafty with a discount codeSo I managed to get the vaporizer from vapefiend in the UK and since they have free shipping and the conversion rate from british pound to US dollar, I was able to get the Mighty for 306 shipped to me. I bought a UK to US adapter and am awaiting arrival of it. I somehow managed to get the vaporizer for 198 british pounds even though it was listed at 238 pounds.
WakeAndVape
VapeLife X
I wonder if that deal is still avaliable, my brother wants a crafty, but I refuse to sell him mine!So I managed to get the vaporizer from vapefiend in the UK and since they have free shipping and the conversion rate from british pound to US dollar, I was able to get the Mighty for 306 shipped to me. I bought a UK to US adapter and am awaiting arrival of it. I somehow managed to get the vaporizer for 198 british pounds even though it was listed at 238 pounds.
Vapetrees
Vaped Out
It looks like it is. Just add it to your cart and the price changes. At least that's what I experience.
Fucker! That's less than I paid for my crafty with a discount code
Yeah I had VAS and was searching around because I knew the sale ended for the Canadian retailers, I wasn't going to buy it I was just curious. But when I saw the price I had to.
VAPORIZER22
Well-Known Member
It looks like it is. Just add it to your cart and the price changes. At least that's what I experience.
Yeah I had VAS and was searching around because I knew the sale ended for the Canadian retailers, I wasn't going to buy it I was just curious. But when I saw the price I had to.
Thinking of picking it up at this price as well. It looks like we get the better price because we are not being charged VAT, i hope there are not any other custom charges. Still a great deal!
Vapetrees
Vaped Out
There shouldn't be. I've ordered some European seats for a car I had, and didn't get charged any. I say go for it, who knows how long it will be this price. I just bought a four dollar adapter on Amazon.
Edit: @p1ssbucket has bought something from them, maybe he can chime in.
Last edited:
Massey64
Well-Known Member
Thanks! I didn't realise there was thread dedicated entirely to whips! Clearly I need to explore this website more
edit:
Michel I know it's been a while but EDIT finally replied to my request raised on Thursday. Seems like they just aren't well informed their response was basically "The Mighty is the only version made my S&B" pretty annoying considering I actually asked them about serial numbers and O rings. Guess we live and learn
Last edited:
Boxman
Well-Known Member
Just some followup notes about the Mighty from another happy camper:
1) Don't need to take long 20 second draws; you can sip on this thing and still get good vapor. I did the long draw thing on my first session with the Mighty, and got completely wasted (overkill). I'm now taking about 5-10 second pulls and still getting way more vapor than I ever got from my previous vape.
2) No "technique" is required, just put your mouth on it and suck. But seriously you just pull however you want and it still produces vapor. I've handed it to three different people now and they were all blowing clouds from the get go.
3) The Mighty is at least 3x more efficient with herb than my previous desktop whip vape. I spent two days using up a single bowl, starting at 350F and slowly increasing temp until the weed was fully vaped out. And I have decent tolerance so this is really impressive (granted I only smoke in the evening).
4) Size is not a problem. I expected the Mighty to be much bigger than it really was. This thing is NOT actually that big; it fits in the hand great and could easily be pocketed if I'm wearing jeans, sweatpants or cargo shorts. I don't really see what all the fuss was about to be honest.
5) Still so impressed at the cool vapor. It's amazing how much heat you can dissipate just by routing the air through a series of small chambers. Ingenious in its simplicity. For the moment at least, I feel no need to use water attachments.
6) Absolutely no need to stir your weed; this thing vapes the entire bowl perfectly even every time. And this is even with multiple sessions (going a full day with partially vaped weed sitting in the bowl, un-stirred). You just pick up right where you left off and start vaping again. When I'm about to end a session without using up the whole bowl, I just turn the Mighty off and keep taking draws until no more vapor comes out. This cools the chamber down so no weed is wasted.
7) Loading tool is awesome. I love how you can pack the Mighty so easily and without any mess. More vapes should implement something like this.
Overall verdict: couldn't be happier. $400 was a lot to spend but I feel it was worth every penny. Not just because the performance is so good, but also because of the convenience factors. And consider what you're saving by not needing to buy GONG adapters, bubblers, special stems, etc. Even the grinder that S&B includes is quite decent; if you don't already have an expensive grinder this could save you from having to buy one. So the $400 price tag is not that much worse than the total price tag from owning one of the cheaper vapes where there's hidden costs.
1) Don't need to take long 20 second draws; you can sip on this thing and still get good vapor. I did the long draw thing on my first session with the Mighty, and got completely wasted (overkill). I'm now taking about 5-10 second pulls and still getting way more vapor than I ever got from my previous vape.
2) No "technique" is required, just put your mouth on it and suck. But seriously you just pull however you want and it still produces vapor. I've handed it to three different people now and they were all blowing clouds from the get go.
3) The Mighty is at least 3x more efficient with herb than my previous desktop whip vape. I spent two days using up a single bowl, starting at 350F and slowly increasing temp until the weed was fully vaped out. And I have decent tolerance so this is really impressive (granted I only smoke in the evening).
4) Size is not a problem. I expected the Mighty to be much bigger than it really was. This thing is NOT actually that big; it fits in the hand great and could easily be pocketed if I'm wearing jeans, sweatpants or cargo shorts. I don't really see what all the fuss was about to be honest.
5) Still so impressed at the cool vapor. It's amazing how much heat you can dissipate just by routing the air through a series of small chambers. Ingenious in its simplicity. For the moment at least, I feel no need to use water attachments.
6) Absolutely no need to stir your weed; this thing vapes the entire bowl perfectly even every time. And this is even with multiple sessions (going a full day with partially vaped weed sitting in the bowl, un-stirred). You just pick up right where you left off and start vaping again. When I'm about to end a session without using up the whole bowl, I just turn the Mighty off and keep taking draws until no more vapor comes out. This cools the chamber down so no weed is wasted.
7) Loading tool is awesome. I love how you can pack the Mighty so easily and without any mess. More vapes should implement something like this.
Overall verdict: couldn't be happier. $400 was a lot to spend but I feel it was worth every penny. Not just because the performance is so good, but also because of the convenience factors. And consider what you're saving by not needing to buy GONG adapters, bubblers, special stems, etc. Even the grinder that S&B includes is quite decent; if you don't already have an expensive grinder this could save you from having to buy one. So the $400 price tag is not that much worse than the total price tag from owning one of the cheaper vapes where there's hidden costs.
Alan Partridge
Smell my cheese
Great review dude. I disagree a little bit with point 6 (I think you get less vapour when you let it cool and fire it back up again), but otherwise this would be a post for a best of the Mighty thread, if one gets made in the future.
shredder
Well-Known Member
I agree, if you don't want to vape a whole bowl, just load a partial bowl with a spare screen on top the bowl to hold the herb in place. Starting then stopping and restarting can be done, but it's not efficient. I've had to do it on occasion and it does work, but.......
shredder
Well-Known Member
It would be best to ask S&B to be sure, but I doubt it would be an issue. They know how easy those stickers are scratched, and it isn't the customers fault, so I can't see them whining over a missing sticker. I kind of dig the scratches myself. It's like tht Rod Stewart donut song. "Every picture tells a story, donut?"
Michel
Well-Known Member
Yes, it will. There are 2 screws under the sticker. The sticker prevents an unauthorized opening of the housing.