The Magic-Flight Box

[Trakteur]

The Imedions are already charged. Feel free to peel and use.

Any tips on how to peel them without any harm? Should I completely peel them or only the part that is inserted into the MFLB?

 

[lwien]

deleted.......by me.

 

[Trakteur]

Could any c-9000 owner explain the difference between refresh/analyze mode and break-in mode? So far, I have put my 4 old batteries that came with the box in break-in mode and entered 2000 mah as battery capacity. Is it fine? Will the charger tell me when it's done?

Also for other modes, what charge rate should I enter?

Thanks a lot in advance!

 

[lwien]

^^^ This should help. http://www.candlepowerforums.com/vb/showthread.php?t=191921

 

[max]

Any tips on how to peel them without any harm? Should I completely peel them or only the part that is inserted into the MFLB?

This brand has no sticky between bat and cover. They peel easy. Just cut a slit to get it started. You can remove it all or leave part of the label on for easy ID.

^^^ This should help. http://www.candlepowerforums.com/vb/sho p?t=191921

Looks like an excellent resource. Thanks for the link lwien.

 

[Durden]

tic tac container wrapped up for stealth purposes sounds like a good idea!

 

[collegerower]

Duren,

Those look great, where did you get them?

I would love some like that.

 

[Vaporgin.]

I just had my first session with the PAMFLB connected to my bong, i loaded about 2/3 of a trench. I was able to get some very thick hits, and I'm now super rocked off 4 or 5 bong rips. The clouds are huge, bigger than any native hit I can take. I'm gonna have to do some side by side testing, but I'd say the LB can now milk my bong as well as my SSV, and better than my MZ. It's been a long time since I've used a Q, but I'd say it'd stack up against that too.

Bad ass. The PA is legit. Buy it now. MF you fucking rock.

hell yeah! This report makes me so stoked to buy the PA. It seems like it could now be a party/group vape as well as an efficient effective homeunit/portable all in one. Magic Flight has really done it this time!

also to B., how spent does the 2/3 of the trench get after how many bong rips. Im wondering how much the efficiency is compromised with the large amounts of vapor. Although i would imagine it doesnt even compare to the bowlpack to hit ratio when combusting out of a bong.

 

[B.]

Being my first trench thru my bong I didn't exactly cook my tench ideally, after those rips there was some black and some green in the trench, i hit it really slow on the last hit and the temp got a little too high. I had the dial at about 90%, which is great when I hit it native because i get the instant feedback on my tongue and I can adjust my inhale rate accordingly, so 90% gets me nicely dark but not super dark brown abv. With only visual feedback, delayed because it has to go thru about a foot of silicone tubing, is more of a guessing game. So, i think tonight when I do pa bong sesh number two I'll turn the temp down to ~80%, and hopefully I won't overcook this trench. About to load some headband for my first puff of the new year. I'll do my best to kill the trench and try to remember how many hits I got



Happy motherfuckin new year people.

 

[elmomuzz]

I brought my PA on a 7 mile hike yesterday. I used a 1000 mah 3 cell lipo battery to power it. It worked awesome.

 

[chucku]

When the pa goes primetime I will have to get a 2nd so I have one for the tv room and another for the bedroom. Also will the car cord Rick includes with zaps work with the pa?

 

[JDSupreme]

I brought my PA on a 7 mile hike yesterday. I used a 1000 mah 3 cell lipo battery to power it. It worked awesome.

Im picking up a motorcycle/atv/scooter battery (wired up to a female 12v car plug from my boat) today that is going to fit in the front pocket of my backpack so i can take the PA hunting or fishing Im curious how many trenches i will be able to get out of a fully charged cycle battery...

Also will the car cord Rick includes with zaps work with the pa?

yes its an exact fit!! i used it today in my truck and it worked fucking awesome....almost officially no need for batts!!!

 

[reece]

Also will the car cord Rick includes with zaps work with the pa?

Also, I used it plugged into the cigarette lighter of my car using the car adapter that came with my MyrtleZap. No need to have a big power inverter along with the wall wart hanging from your lighter socket.

 

[DeepFried]

Anyone have experience with getting this shipped in Canada? Like how long it took and which web site to buy from.

Thanks!

I have bought three LBs from www.vaporizers.ca with no complaints. They usually ship within two days using Canada Post, and my orders have usually arrived within two more days. The packaging is discreet but someone will have to sign for the delivery. Shipping costs are reasonable, but you will have to pay HST.

Several FC members have posted here that they have ordered successfully from US websites, including Blisssville. This could be cheaper as the Canabuck is at par right now. You might have to pay GST; I know I have had to pay it on some US orders (not the LB) but I have also not had to pay it on others (most actually). For me, the small savings would not be worth the extra wait. I\\\\\\\\\\\\\\\'m not aware of anyone having Customs turn back or confiscate the shipment but there is potential for a delay. Mr. Smoke No More reported that he had to wait about three weeks for his to arrive, although puffitup shipped five days after he ordered. (Just checked the thread.) Not sure if that was due to Customs but that\\\\\\\\\\\\\\\'s a long time to wait.

One of my good friends lives in Canada and ordered from www.Blisssville.com, got it in only 2 days with no taxes, said that it shipped from within Canada so no customs or delays. That was a couple of months ago, you should contact BlissSville and double check, they seem to have the best customer service and they ship the newest models as well as handle all warranty requests.

 

[george]

I think some people will be glad to know that the MFLB works in extremely cold weather.

I was skiing in Breckenridge, CO this past week with temperatures below zero. It was working on the lift, as well as in the restrooms ontop of the mountain. I was keeping my LB and batteries in the black cloth bag inside my jacket pocket. The batteries were cold whenever i took them out to use, but they still provided good enough hits.

Oh, and i think i'm guna buy the PA once it gets officially released. Breckenridge is silly expensive , so i need to hold back on unneccesary spending at the moment

 

[Empherio]

Just came back from a trip to Bama and found the PA waiting for me. My initial impression is very positive. The ability to maintain a consistent temp is something that could never be achieved even with the best batt/charger, I don't care how good your hitting technique be, spotty batts will always fail ya.

Now it hits like a dream and allows the draw to be something like a normal toke, rather than a prolonged smooch of this admitedly lovely little box. Experimenting with different temps is also fun and ongoing, like, right now

Kudos MFLB for a great renovation of an already awesome product. My only nitpick is that the little black handle is missing one of the black screws that secure it- not a real problem, since I can easily replace.

I should also add that mine fits tight as a *&%?!. Also not a real problem, but does inhibit easy insertion, true.

 

[jambolaya]

Do you guys think that buying the smart chargers is a waste since the pa is available?

 

[natural farmer]

Do you guys think that buying the smart chargers is a waste since the pa is available?

If you need to go mobile and stealth better use good batteries and charger. For home and group I would go for the PA.

 

[Jackson1303]

Will my powerex 2700's be okay to use with the mflb charger?

 

[Boombox]

Hi there B. I've idea what "milking" a bong means although I have read it on here a few times.

I have a Launch Box (adaptor ordered). Would you be able to explain how exactly you connect your LB to your bong and how you go about milking it.

Also is the hit from the LB-bong as good as a hit from a regular combustion bong?

Thanks in advance!

milking just refers to filling your bong vapor/smoke. its more from smokers, we always called it chalking, not milking, but milking seems to be the prevalent term. check some milk shots on your tube. with vapor you'll never get the creamy white milk that smoke looks like, but you can still get some very thick and tasty hits.


My SSV whip makes a great seal on my 14mm, and my LB whip fits perfectly into the SSV whip, so I cut a small section of my SSV whip, inserted my LB whip. I have a video of my LB bong rips somewhere in this thread, but with a slightly different setup.

As far as better than smoke, thats all about your preference. I like vapor bongs soooo much better than combustion, but its different. From what I understand, a good vapor hit takes around ten minutes for the effects to truly be felt, where as with a smoke rip you tend to feel it much faster, partially due to your body's response to all the nasty shit that comes with smoking. I will take a vapor bong every time. For me, it is better by far.

Thanks for your help B.

Sorry if I sound an idiot but I'm quite new to vapourizing. Only just switched from joints/bongs.

So I'm guessing that once you have the LB hooked up to the bong you just put the batteries in the LB, draw on the bong as normal and inhale the required vapour once it reaches a volume that you are comfortable with?

I did not receive a whip with my LB (actually ive never had a whip of any sort and always wonder what the big deal is about them - cooler air? Is that it?). Will this work if I just hold the acrylic stem to the bong instead of attaching whips or does it need to be airtight?

Also, is the purpose of a vape/bong just to increase the size of the hit or does the vapour taste better due to the water in the bong?

Thanks again and Happy New Year!

 

[Lo]

Will my powerex 2700's be okay to use with the mflb charger?

Yes, they can be charged in the MF charger.

 

[natural farmer]

Hey guys, how do you clean the light bulb? It gets darker by being covered with resin and it needs cleaning every few days. Is there an easier way than ear buds?

 

[JDSupreme]

Hey guys, how do you clean the light bulb? It gets darker by being covered with resin and it needs cleaning every few days. Is there an easier way than ear buds?

that's quite odd I've vaped tons of trenches (1000+) and the light has never been discolored in the least bit. the resin all stays on the bottom

and i certainly wouldn't even think about sticking something in there to clean it!!! you're just asking to pop the screen

 

[max]

It gets darker by being covered with resin

Are you using herb? That shouldn't be a problem. From the MF site-

Does the screen get dirty?
No, generally not. By acting as an emission surface, it rarly collects any sort of residue, even after long term usage.

As JD said, you certainly don't want to try to get past the screen. That's all that needs cleaning and it shouldn't take much.

 

[chucku]

Try a cleaning cycle or 2. Empty trench with cover open with fresh battery or pa set to 11 for a minute.