The Magic-Flight Box

Buildozer

Buildozer

Baked & Fried
i have a question about the warranty process... do they not make you send back your broken box now since they make you take a picture of it w/ the screen out??... i was under the impression that the old boxes had to be sent back but no time during the process did they say to do that.. i thought maybe my new box would come w/ a note saying to send in my old one... just want to make sure that it will be warrantied still if i dont send back the broken box
 
Buildozer,
Vicki

Vicki

Herbal Alchemist
Buildozer said:
i have a question about the warranty process... do they not make you send back your broken box now since they make you take a picture of it w/ the screen out??... i was under the impression that the old boxes had to be sent back but no time during the process did they say to do that.. i thought maybe my new box would come w/ a note saying to send in my old one... just want to make sure that it will be warrantied still if i dont send back the broken box
Click to expand...

I'm not sure. Have you asked Magic Flight what they want you to do?
 
Vicki,
Buildozer

Buildozer

Baked & Fried
Just sent them an email... i'm holding on to it just in case... just want this warranty process to finally be over... had a little mix up and ended up taking a month to get this warranty box. its my nicest looking one yet too... each one seems nicer than the last ha.
 
Buildozer,
  • Like
Reactions: Vicki
B

BigDaddyVapor

@BigDogJunction
I am unaware of any policy changes with the warranty. Its always been, if you're stateside... send it back (with some exceptions, I'm sure). If you live outside the States, they ask for proof of the box being dismantled/unusable.

Though, that may work out for me, since I'm still procrastinating sending back the foil wrapped Box in my closet. LOL!
 
BigDaddyVapor,
Buildozer

Buildozer

Baked & Fried
OF.... good tip on the 'box waxing':tup:, i ended up just using some burt's beeswax and i'm very happy w/ it. i can see how straight floor wax would protect better.. it might not last as long as the floor wax??? because the beeswax has ~5 different oils on top of the beeswax... i do notice the wax doing its thing though. don't think ill go w/o it again.

VVVV EDIT : right on, thanks for the info... i never think to use wax.
 
Buildozer,
OF

OF

Well-Known Member
Buildozer said:
OF.... good tip on the 'box waxing':tup:, i ended up just using some burt's beeswax and i'm very happy w/ it. i can see how straight floor wax would protect better.. it might not last as long as the floor wax??? because the beeswax has ~5 different oils on top of the beeswax... i do notice the wax doing its thing though. don't think ill go w/o it again.
Click to expand...

You're welcome. Great stuff. Museums wax stuff, that's where I got onto the practice. Hard waxes are very tough, nearly perfectly clear, last a long time and can be completely removed from antique guns, china and so on as needed. Works great on tools you'll use in the rain or other wet conditions (like shovel handles).

OF
 
OF,
  • Like
Reactions: Puffers
GOATPUSSY

GOATPUSSY

Active Member
In the process of warranty-ing my first box now. I filled out the form online and attached photos of damage/serial number. The new box is on its way and I'm requested to remove the screen from the old one and take a photo with box and some of my info written on a white piece of paper and send that to them. (Was supposed to do that last night... Ooops.). No word on sending the box back on the email although I don't have the new box yet and I haven't completed my photo task yet.
Btw... I'm stateside.



BigDaddyVapor said:
I am unaware of any policy changes with the warranty. Its always been, if you're stateside... send it back (with some exceptions, I'm sure). If you live outside the States, they ask for proof of the box being dismantled/unusable.

Though, that may work out for me, since I'm still procrastinating sending back the foil wrapped Box in my closet. LOL!
Click to expand...
 
Buildozer

Buildozer

Baked & Fried
GOATPUSSY said:
In the process of warranty-ing my first box now. I filled out the form online and attached photos of damage/serial number. The new box is on its way and I'm requested to remove the screen from the old one and take a photo with box and some of my info written on a white piece of paper and send that to them. (Was supposed to do that last night... Ooops.). No word on sending the box back on the email although I don't have the new box yet and I haven't completed my photo task yet.
Btw... I'm stateside.
Click to expand...
i was never told to send the box back... part of an early on email said to hold on to it though... i'll be getting an email about this in a day or 2..
 
Buildozer,
vapirtoo

vapirtoo

Well-Known Member
ehakim, hitting the box with out a stem is called "native" and it allows precise
temp control as the heat can be felt directly on your mouth and tongue.
Some of our members only use the box in the native mode while others
prefer stems, tubing and water filtration.
Have fun experimenting with all of ways that the box can be used.
I usually employ the stem, but in public I usually go native for more stealth.
 
vapirtoo,
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Finally got around to snapping pics and sending them in... now the waiting game begins. Considering it's around noon... I'm about 40 miles from them... hoping by the end of my shift Saturday I'll have some goodies in the mail? We shall see...
 
Quetzalcoatl,
JeeSee

JeeSee

Cultured Curmudgeon
I feel like once I get this PA, I will be equipped with everything I need to get through life.
 
JeeSee,
Puffers

Puffers

Micro-Climate Mastermind
OF said:
You're welcome. Great stuff. Museums wax stuff, that's where I got onto the practice. Hard waxes are very tough, nearly perfectly clear, last a long time and can be completely removed from antique guns, china and so on as needed. Works great on tools you'll use in the rain or other wet conditions (like shovel handles).

OF
Click to expand...


Great tip OF thanks I never thought to wax the tools I use in the rain. It always irks me to have a new tool rust from being in the rain for like 5 min. I did the same as buildozer and waxed my box the other week with some Burt's bees I had. It works great put another coat on after a week. The wood liked oils in there anyway I think. It shined up nice :tup: got a box of Powerex 2700's last week and :whoa: I should got some a loooong time ago, i can't wait to try MF's new ones when they are available if they top a Powerex they must be the shiznit :lol:
 
Nbajunkie

Nbajunkie

Someones always watching..
let me just say that I loved my box till the very end. and the end was yesterday. I sold it to my buddy with all it's accessories for 200. the finishing grinder,pa,WPA/wpw and a 10 inch beaker. it's a nice setup but when I did the math to get my .mflb to work how I wanted .it was then I realized how much I spent. reality check! . I miss you mflb,you planted the vape seed in me(figuratively)
but I introduced someone new to vaping .that's what it's all about,and that's how I pay it forward!
 
DasBlunt

DasBlunt

Active Member
Rubber ring in bowl, on top of the screen, came loose, then after that, it seems I pressed down the screen on one side, trying to somehow press the black ring in.

make sense? defect? my fuck up? still hits though!!! burning some retarded Flo this week...0% couch lock, 100% rainbows.
 
DasBlunt,
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
DasBlunt said:
Rubber ring in bowl, on top of the screen, came loose, then after that, it seems I pressed down the screen on one side, trying to somehow press the black ring in.

make sense? defect? my fuck up? still hits though!!! burning some retarded Flo this week...0% couch lock, 100% rainbows.
Click to expand...

Doesn't matter, you have a warranty claim.
 
DasBlunt

DasBlunt

Active Member
I just pulled the black ring out.....box still works. It is my home box, so should i just keep it if it is working. I hate to waste resources.

best company ever BTW from an old problem.
 
Buildozer

Buildozer

Baked & Fried
i just heard back from magic flight about the warranty... i guess they just do photo proof that your box isn't working now.. i live a couple hours from san diego and they didn't ask me to send it back, the email just said to rip out the screen, break lid, cross out back, write last 4 digits on front, and take pics of front n back and email back w/ subject reading: Activate Warranty... aside from the subject title, that was the first thing they had me do, but i guess ill just resend the pics again to be safe...
 
hoptimum

hoptimum

Well-Known Member
Buildozer said:
i just heard back from magic flight about the warranty... i guess they just do photo proof that your box isn't working now.. i live a couple hours from san diego and they didn't ask me to send it back, the email just said to rip out the screen, break lid, cross out back, write last 4 digits on front, and take pics of front n back and email back w/ subject reading: Activate Warranty... aside from the subject title, that was the first thing they had me do, but i guess ill just resend the pics again to be safe...
Click to expand...
thanks for sharing that, I was curious about the process
 
hoptimum,
You must log in or register to reply here.
Top Bottom