OF

Well-Known Member
Don't use bubble hash with cotton.

:2c:

What the man said....

The idea of the cotton is to soak up liquid, bubble doesn't turn liquid so it can't move. I'm thinking you might be able to do it if it was part of something else (say AVB?) that was in motion? Then again, it may be a way to really foul up your box (and IMO not fair to call for a replacement if you break it doing what they tell you not to....).

Vitolo's cool trick only works with full melts, waxes and oils. The lower end stuff isn't going to melt in.

IMO the Herbal Air does such a better job with bubble it's not worth messing with the LB. If it needs to be portable I think the Iolite does a bang up job as well with a 'duplex load'. And again, no screen to foul. I assume Wispr does even better.

OF
 
OF,

barca14

Member
Do you NEED it to have water filtration? If you just want a chamber to milk, you can melt a hole at the bottom of a water bottle that is the size of the stem and use that as a chamber to milk. I've done it a few times, works surprisingly well.
I just tried this, great idea! I don't know why but it gets me so much thicker vapor, and with lower grade material too.
 
barca14,

Giant Robot

Well-Known Member
Any best practices for giving the MFLB screens a thorough cleaning to bring it back to like new condition? I'm going to be selling one of my spare original MFLB's soon (I eventually bought a second zebrawood limited model that became my "go-to") and wanted to get it as pristine as possible for "mail" purposes. ;)

Thanks!

Giant Robot
 
Giant Robot,

sundaddy

Well-Known Member
I can't wait for the Magic Flight concentrate pad to come out. I'm too chicken to try the cotton / oil trick in my LB.
 
sundaddy,

momofthegoons

vapor accessory addict
Any best practices for giving the MFLB screens a thorough cleaning to bring it back to like new condition? I'm going to be selling one of my spare original MFLB's soon (I eventually bought a second zebrawood limited model that became my "go-to") and wanted to get it as pristine as possible for "mail" purposes. ;)

Thanks!

Giant Robot


You can find everything you need to know here
 
momofthegoons,

OF

Well-Known Member
I can't wait for the Magic Flight concentrate pad to come out. I'm too chicken to try the cotton / oil trick in my LB.

Do you know something I don't (like it's coming)? Last time I recall this discussed it was kind of a non starter since some pads short out the screen while others give the box too much mass to heat (normally it only heats a fraction, the bit at the bottom and edges) and still others keep the goodness too far from the heat.

As I understood it, Vitolo's clever trick with cotton works because the stuff drains down inside the cotton to get to the hot part, but the pad itself is an insulator so doesn't zap the heat away.

What's your understanding?

TIA

OF
 
OF,

J.R.R.Tokin'

Wych Doctor
Manufacturer
Hey OF. Did you hear Dopefiends interview with Julie from Magic Flight? In it she talks about the concentrate add-on for the MFLB as being in development stages but looking like it will happen.
 
J.R.R.Tokin',

OF

Well-Known Member
Hey OF. Did you hear Dopefiends interview with Julie from Magic Flight? In it she talks about the concentrate add-on for the MFLB as being in development stages but looking like it will happen.

No, thanks for the information, I obviously didn't hear it or about it or I wouldn't have said what I did above.......

Cool. Someone does know more than me, happens a lot really. I wonder what the hang up is then? Seems like a pretty simple product (at least the Volcano version is) and more important (at least to me) is how it works. That is how it gets around the issues raised before. Any idea on that? Will it work with all types? I probably should try to listen to that podcast again, tried twice and gave up....don't recall why though.....

Thanks again.

OF
 
OF,

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Any best practices for giving the MFLB screens a thorough cleaning to bring it back to like new condition? I'm going to be selling one of my spare original MFLB's soon (I eventually bought a second zebrawood limited model that became my "go-to") and wanted to get it as pristine as possible for "mail" purposes. ;)

Thanks!

Giant Robot

I don't think you can fully clean the box because resin builds up right under the screen on the wooden part. What I found best to clean my screen is to give it a few quick blasts with a compressed air can, then brush off anything it missed with the brush. Dip the brush in isopropyl alcohol and then use it on the screen to wet and remove the build-up. I then do a burn cycle and re-clean the screen. It stays discolored but pretty darn clean.
 
Quetzalcoatl,

YoGranMazPimp

I Vapes Hard
I got my PA and VPA for my LB this weekend and spent all weekend testing it out. I must say this thing is amazing and i love my LB more than ever now. I get hits like never before and it is easy to use in the car.

It should come with the PA. Magic flight shouldnt want anyone to enjoy the LB without the PA. I had some first time users of the LB with batteries not really like it, and perfered to not use it cause of either lack of technique or the lighter hits with the batteries. With the PA i consider my LB a heavy hitter just like my ssv.
 
YoGranMazPimp,

YoGranMazPimp

I Vapes Hard
^^^^^i agree. For a new LB user, dropping nearly 200 with the PA may not seem worth it, especially since the LB is mostly known for its portability and with batteries...but for anyone who knows the power the PA unleashes, it is most worth it.
 
YoGranMazPimp,

vorrange

Vapor.wise
i'm talking about a kit using just the PA, since it is far supperior than a battery usage many people would prefer it, and i'm guessing it could be about the price of the current kit.
 
vorrange,

stuey

Well-Known Member
What size bong would people reconmend for use with the WPA?

Could you give a capacity size, i.e. 250ml, 500nl 1000ml etc... just saying small isnt all that descriptive so Id like to know the capacity please.

Thanks
 
stuey,

stuey

Well-Known Member
^^^^^i agree. For a new LB user, dropping nearly 200 with the PA may not seem worth it, especially since the LB is mostly known for its portability and with batteries...but for anyone who knows the power the PA unleashes, it is most worth it.
I have just ordered one!
 
stuey,

YoGranMazPimp

I Vapes Hard
Good choice stuey you will he glad you did! I love the little black bag it comes with. I can throw the LB in its bag right in with it. Anyone who knows me sees me approaching with that bag and they know what's about to go down.
 
YoGranMazPimp,

BigDaddyVapor

@BigDogJunction
What size bong would people reconmend for use with the WPA?

Could you give a capacity size, i.e. 250ml, 500nl 1000ml etc... just saying small isnt all that descriptive so Id like to know the capacity please.

Thanks

Well, for larger pieces, you're going to want more diffusion, coupled with as little drag as possible. I have a nice 14" beaker and am ditching it, because as I have nicknamed it, "Glug"... it bugs the shit out of me. You want something you can control your pull, from barely a breath to tornado speeds, in the trench. My personal choices are A) my bubbler, which is 150 ml and B) my dome perc water pipe, which is tops, 400 ml.

Since you're going to be using the WPA, I would go with a medium beaker or straight tube, with some sort of perc.

Here's the link, to the two pieces, I'm talking about, including the WPA on my beaker. Two completely different experiences to. Beaker is smoother, but I can almost ABV a trench in a single rip (my lungs, can only expand so much), on the bubbler. Easier to keep the trench stirred with the whip on the bubbler.

Customized vape setups
 
BigDaddyVapor,

Vapinghole

Low-Temp Hempist / JedHI Master
Does the PA increase odor levels?
Only if you use it right.....

More use will probably make it smell more, I'd count on it. However the source doesn't matter. Then again, the PA does tend to make you use it more and harder....does me anyway.

OF

Plus fucking one, OF! The PA makes me use the shit out of my LB (whereas charging batteries was a relative PITA). I've converted multiple combusters, including a dude that works at my favorite head shop, and I credit the LB/PA combo.
 
Vapinghole,
picked this baby up a few months ago after scouring FC to find what was perfect for me and couldnt be happier!!!. but now ive retrned and seen that it looks like i need a power adapter anywhere easy to pick this up ? would be busting out the vape 34/7 with one of those u know anyways happy vaping and hello
 
addison kokko,

stuey

Well-Known Member
regarding the WPA.

Weed Star do a pipe adapter that turns an ashcatcher into a pipe.

Would this work better than a bong with a WPA?

Im not really sure if the idea of the WPA is to get abong hit or to get a continual stream of vapor filtered through water.

Any thoughts on this?
 
stuey,
Top Bottom